Netherlands (English)
België
Deutschland
Finland
Ireland
Luxembourg
Portugal
Poland
Österreich
France
España
Italia
Sverige
Danmark
Fulcrum Racing 6 Road Bike Wheels
Ask a question about this product
Email Customer Service
Try in store
A large part of our assortment is in stock in our stores and ready to try, fit, and experience without an appointment.
Our full assortment is available online. You can order and pay for products online and have them delivered for free to one of our Superstores. This way, you can try everything out. Not satisfied? You can return it to the store free of charge and receive a refund.
Specifications
Specifications
| Brand | Fulcrum | |
| Wheel characteristic(s) | Replacement wheels | |
| Tyre width recommended by Mantel | up to 25 mm | |
| Required valve length | > 40 mm / > 43 mm | |
| Weight (weighted by Mantel) | 1789 grams | |
| Brake Type | Rim brake | |
| Tyre Type | Folding tyre | |
| Maximum Total Weight | 109 kg | |
| Type of wheel | Wheelset |
• 9/10-speed spacer
• Rim tape
• Quick-release Skewers (front and rear)
• (possibly a torque wrench)
Installing a cassette on a wheel is easy if you have the right tools. If you purchase a cassette remover with a Shimano fit, you will be able to mount either a Shimano or Sram cassette on your rear wheel. Please note! For a Campagnolo cassette you need the Campagnolo tool. If you have a Shimano 9/10-speed cassette, first slide the spacer over the body. Then you place the cassette on the body. This can only be done in one way because of the fit of the body. Finally you turn the washer straight on by hand and tighten it with the cassette tool. Cassettes aren’t easily overtightened, but if you want you can use a torque wrench for this.
• For Shimano 9/10-speed, do not forget to mount the spacer first before installing the cassette
• Make sure the rim tape is stuck well in the rim
• On both the front and rear wheel, there is a small adjustment screw on the left-hand side to adjust the side play
Reviews
Reviews
5 / 5
OK
My previous wheels were Racing 7 type and 11 years old. They were not really nice and straight anymore. Hence replaced. I have only cycled 55 km with the new set. So can't say much about it. Rim is nice and straight. Looks nice. I am used to 23 mm tyres. These wheels require minimum 25 mm tyres. Because of the slightly lower pressure, the ride feels a lot more comfortable(softer). While riding, I did not hear any rattling from the body in neutral.
Pros & Cons
5 / 5
well-satisfied
I have already driven 600 km with it again
Pros & Cons
5 / 5
Very good wheel for the money
5
OK
My previous wheels were Racing 7 type and 11 years old. They were not really nice and straight anymore. Hence replaced. I have only cycled 55 km with the new set. So can't say much about it. Rim is nice and straight. Looks nice. I am used to 23 mm tyres. These wheels require minimum 25 mm tyres. Because of the slightly lower pressure, the ride feels a lot more comfortable(softer). While riding, I did not hear any rattling from the body in neutral.
-
Accelerates well
-
Looks nice
-
No rattling body
-
Comes perhaps with time :-)
Related products
Related products
|
|
|
|
|
| Fulcrum Racing 6 | Shimano WH-RS100 | Shimano 105 WH-RS300 | Fulcrum Racing 900 C17 | |
| 9 reviews | 81 reviews | 29 reviews | ||
| Wheel characteristic(s) | Replacement wheels | Replacement wheels | Replacement wheels | Replacement wheels |
| Body Type | SRAM Race 10/11 speed / Shimano Race HG 9-12 speed / Campagnolo 9-12 speed | SRAM Race 10/11 speed / Shimano Race HG 9-12 speed | SRAM Race 10/11 speed / Shimano Race HG 9-12 speed | SRAM Race 10/11 speed / Shimano Race HG 9-12 speed |
| Tyre width recommended by Mantel | up to 25 mm | up to 25 mm | up to 25 mm | |
| Required valve length | > 40 mm / > 43 mm | > 39 mm | > 39 mm | > 37 mm |
| Weight (weighted by Mantel) | 1789 grams | 1808 grams | 1883 grams | |
| Brake Type | Rim brake | Rim brake | Rim brake | Rim brake |
| 219,- | From 69,95 | From 94,95 | 189,95 | |
| This product | View product | View product | View product |