Netherlands (English)
België
Deutschland
Finland
Ireland
Luxembourg
Portugal
Poland
Österreich
France
España
Italia
Sverige
Danmark
- Ordered before 22:00, delivered tomorrow
- Free tracked shipping over € 49,-
Ask a question about this product
Try in store
A large part of our assortment is in stock in our stores and ready to try, fit, and experience without an appointment.
Our full assortment is available online. You can order and pay for products online and have them delivered for free to one of our Superstores. This way, you can try everything out. Not satisfied? You can return it to the store free of charge and receive a refund.
Pros & Cons
Pros & Cons
- Use this kit to convert your bike tyre's Presta valve to a Schwalbe Clik Valve.
- The Schwalbe Clik Valve allows you to get more air through the valve with less effort.
- Attaching and detaching the pump is super easy, just click it on.
- The Clik Valve has almost no pressure loss with pump disconnection.
- For a regular pump that is to be screwed onto the valve, you need the adapter (to be ordered along with the kit).
Specifications
Specifications
| Brand | Schwalbe | |
| Valve | SV (Presta) |
A regular pump with a clamping system for a Presta valve can also be used for this valve core. A pump head that screws onto the valve does need the corresponding adapter.
Choose only the valves if you already own either an adapter or a pump head.
Schwalbe Clik Valve Adapter
Choose the Schwalbe Clik Valve adapter if you own a pump for which you need an adapter.
Schwalbe Clik Valve Pump Head
Choose the Schwalbe Clik Valve Pump Head if you own a pump for which you need a pump head.
Reviews
Reviews
Most recent reviews
4 / 5
Satisfies fine in the end
Valves are fine, small pump head a bit less convenient. Works well on electric pump, though. Better convert your high-pressure pump and (unfortunately) buy new SCV mini pump
Pros & Cons
4 / 5
Worth every penny
Once they are in place, pumping up your tyre is a piece of cake. But screwing them into the valve was a bit of a hassle because the tool quickly stopped working so you had to use pliers, which unfortunately quickly damaged the outside of the valve. Otherwise, it works excellently
Pros & Cons
5 / 5
Was critical, but does not want to go back
I was initially quite critical of the Schwalbe Clik valve. It seemed like another marketing solution to a problem that isn't really there. But after using it, I must honestly say: I am really super satisfied. Clipping it in works surprisingly smoothly and much easier than a traditional Presta head. No more hassle with pumps coming loose or bent valves. The system feels reliable and I haven't experienced any air loss or problems so far. As far as I am concerned, this is not a gimmick but simply a practical improvement.
Pros & Cons
5 / 5
Fast, twist-free valve and valve caps
Recently equipped all bikes with these schwalbe valves. Inflating and inflating bike tyres is now much faster. Getting the bikes ready for a ride now takes seconds instead of minutes.
Pros & Cons
4 / 5
The future
Think this will be the future though. Just doesn't fit all valves with presta. I had tpu tyres with plastic valves. So you twist these to pieces during installation. Fortunately, in April there will be a tyre with this click system made with TPU
Pros & Cons
4
Satisfies fine in the end
Valves are fine, small pump head a bit less convenient. Works well on electric pump, though. Better convert your high-pressure pump and (unfortunately) buy new SCV mini pump
-
Pumping very easy
-
Valves easy to replace
-
Pumphead on mini pumps not nice to use
4
Worth every penny
Once they are in place, pumping up your tyre is a piece of cake. But screwing them into the valve was a bit of a hassle because the tool quickly stopped working so you had to use pliers, which unfortunately quickly damaged the outside of the valve. Otherwise, it works excellently
-
Inflates faster
-
Difficult to assemble
5
Was critical, but does not want to go back
I was initially quite critical of the Schwalbe Clik valve. It seemed like another marketing solution to a problem that isn't really there. But after using it, I must honestly say: I am really super satisfied. Clipping it in works surprisingly smoothly and much easier than a traditional Presta head. No more hassle with pumps coming loose or bent valves. The system feels reliable and I haven't experienced any air loss or problems so far. As far as I am concerned, this is not a gimmick but simply a practical improvement.
-
Clicking the pump in and out is extremely easy
-
Fast, efficient
-
No noticeable air loss so far
-
All valves have to be converted
-
Presta pumps do not work optimally
5
Fast, twist-free valve and valve caps
Recently equipped all bikes with these schwalbe valves. Inflating and inflating bike tyres is now much faster. Getting the bikes ready for a ride now takes seconds instead of minutes.
-
airtight connection
-
Easy installation
-
no unscrewing valve caps and valves
-
Not compatible with all valves
4
The future
Think this will be the future though. Just doesn't fit all valves with presta. I had tpu tyres with plastic valves. So you twist these to pieces during installation. Fortunately, in April there will be a tyre with this click system made with TPU
-
Good tight connection between valve and pump
-
Cannot fit all valves. 2 tpu tyres killed
Frequently bought together
Frequently bought together
Recommended by the product specialist
Recommended by the product specialist
Related products
Related products
|
|
|
|
|
| Schwalbe Presta - SCV Conversion Kit | XLC Presta Valve Core | XLC Adapter Nipple Set | XLC Valve Nipple | |
| 6 reviews | 10 reviews | 4 reviews | 4 reviews | |
| Valve | SV (Presta) | |||
| Included | No adapter / Schwalbe Clik Valve adapter / Schwalbe Clik Valve pump head | |||
| From 5,95 | 4,95 | 5,95 | 5,95 | |
| This product | View product | View product | View product |