Dynamic Wander Wax

Make sure your wax layer lasts an extra long time with this Dynamic Wander Wax! This wax is extremely durable and made to adhere to your chain for an incredibly long time. You won't have to lubricate your chain as often, so you can focus completely on cycling! Plus, this Wander Wax was made to work in all weather conditions and will last for up to 1000 kilometers. Apply it when you're hitting the road, or when you're heading into the woods or going for a long cross-country ride. The unique, biodegradable formula reduces environmental impact and is extremely dirt repellent. That means you won't find any clumps of black lubricant on your chain anymore, and your entire drivetrain will stay nice and clean. And that improves the durability of your entire drivetrain!

Biodegradable
Wander Wax is the first biodegradable endurance hot wax. It provides a clean, buttery smooth and efficient drivetrain, while ensuring ultimate, long-term wear and tear protection. Suitable for road, gravel and MTB trail use, in all weather conditions. And to top it all off, Wander Wax is also less taxing for the environment!

Melt your Hyper Wax in a wax heater at 73 degrees Celsius. Make sure your drivetrain and chain are completely degreased and dry. Place the chain in the wax for at least 15 minutes, then slowly remove it from the wax and allow it to cool down completely. Move every chain link so it can move freely. Use a clean, dry microfibre cloth to remove any excess wax from the chain. Reinstall the chain onto your bike and you're ready to ride.

During the first 5 kilometres of cycling, excess wax is pressed out of the chain and the wax layer optimises itself. The wax flakes that come loose during this first ride can easily be removed with a clean cloth. Use a clean, dry cloth to clean the chain between waxes. Use a clean, dry brush to remove wax residue from other drive train components.

Reapply the wax when the chain sounds "dry", by repeating the steps above. A waxed chain can be cleaned and placed into liquid wax directly, without degreasing it first.

After 10-15 reapplications the wax will have to be replaced, to prevent any contaminants from affecting or wearing down your drivetrain.

Please note: you have to heat up this Hyper Wax before you can dip your chain in it. We recommend purchasing a wax system that allows you to set a specific temperature.