Schwalbe Adhesive High Pressure Rim Tape

Schwalbe Adhesive High Pressure Rim Tape
36 reviews
Rim Tape Width
Please select: Rim Tape Width
to see the stock
4,90
Please select an option to view the stock
Please select a version to see the in-store stock

  • Ordered now, delivered on Wednesday
  • Free tracked shipping over € 29,-

mantel-customer-service

Ask a question about this product

Email Customer Service

Specifications

Specifications

Brand
Schwalbe
Wheel Size
26 inch (650c) / 28 inch (700c) / 29 inch
Type of rimtape
Adhesive Tape

Description

Description

The Schwalbe rim tape is made of high quality polyamide which is lightweight and highly resistant to pressure. The special glue prevents slippage, even under a high load and at high temperatures.

Compatibility

• Length 200cm
• Width 15 or 18 mm
• Maximum tyre pressure 10 bar / 145 psi
• Comes as a pair (2 pieces)

Show more Show less

Reviews

Reviews

4.6 / 5
Average from 36 reviews
5
9 reviews
4
1 review
3
0 reviews
2
0 reviews
1
0 reviews

Most recent reviews

5 / 5

Easy to stick

- Rik 13 August 2023

Didn't know what width I needed. Took the gamble of 18mm, fits perfectly. Better than the ribbon that was in my rim right from the factory. Read on the original site that 15mm was only suitable for a rim with a very deep groove. Just found a video on how to glue it and was ready within 5 minutes. Hopefully no worries for years.

Pros & Cons

Adheres well
Cheap
Reasonably correctable
A bit too long, so cut
Automatic translation

5 / 5

Perfect!

- Matthias 9 August 2023

The ribbon is very easy to attach and perfectly sized

Pros & Cons

easy to correct, still sticks securely
length is perfect
valve hole provided
Automatic translation

5 / 5

Aanrader

- Jesse 16 September 2021

Great

Pros & Cons

Can tegen hoge druk
Doet wat het moet doen, voelt stevig
Automatic translation

5 / 5

I'm going to use more sticky tape

- Jan 26 August 2021

Make sure you have an old valve (if necessary, cut one out of an old inner tube). Stick this valve through the valve hole and put the rim tape over it, now tighten the nut on the valve. The whole thing is now fixed. Now go around the wheel and press the rim tape into the hollow over the spoke holes. Stick a 5 cm overlap and cut the rrst off. Done.

Pros & Cons

Adhesive tape does not slide
Adhesive tape that is easy to put on
Automatic translation

5 / 5

Good product, buy and don't hesitate.

- Thomas 26 June 2021

I am going to return this as it is too narrow for my rim, the measured rim-to-rim size is 20cm, so have ordered 22cm elsewhere and applied that to the rim. Works very well, now have 100km on it and no more punctures. (I actually got a puncture due to contact of the inner tube with the spoke holes on the rim, so replaced the existing rim tape with this). Didn't use it for tubeless but as a regular rim tape. Contrary to some reviews, my experience is that it sticks well, pull it tight as far as you can and then push the rim tape into the hub of the rim with your index finger or thumb. Make a hole at the location of the valve and done. Tyre can be put back on.

Pros & Cons

Good quality
Automatic translation

5

Rik, 13 August 2023

Easy to stick

Didn't know what width I needed. Took the gamble of 18mm, fits perfectly. Better than the ribbon that was in my rim right from the factory. Read on the original site that 15mm was only suitable for a rim with a very deep groove. Just found a video on how to glue it and was ready within 5 minutes. Hopefully no worries for years.

  • Adheres well
  • Cheap
  • Reasonably correctable
  • A bit too long, so cut
Automatic translation

5

Matthias, 9 August 2023

Perfect!

The ribbon is very easy to attach and perfectly sized

  • easy to correct, still sticks securely
  • length is perfect
  • valve hole provided
Automatic translation

5

Jesse, 16 September 2021

Aanrader

Great

  • Can tegen hoge druk
  • Doet wat het moet doen, voelt stevig
Automatic translation

5

Jan, 26 August 2021

I'm going to use more sticky tape

Make sure you have an old valve (if necessary, cut one out of an old inner tube). Stick this valve through the valve hole and put the rim tape over it, now tighten the nut on the valve. The whole thing is now fixed. Now go around the wheel and press the rim tape into the hollow over the spoke holes. Stick a 5 cm overlap and cut the rrst off. Done.

  • Adhesive tape does not slide
  • Adhesive tape that is easy to put on
Automatic translation

5

Thomas, 26 June 2021

Good product, buy and don't hesitate.

I am going to return this as it is too narrow for my rim, the measured rim-to-rim size is 20cm, so have ordered 22cm elsewhere and applied that to the rim. Works very well, now have 100km on it and no more punctures. (I actually got a puncture due to contact of the inner tube with the spoke holes on the rim, so replaced the existing rim tape with this). Didn't use it for tubeless but as a regular rim tape. Contrary to some reviews, my experience is that it sticks well, pull it tight as far as you can and then push the rim tape into the hub of the rim with your index finger or thumb. Make a hole at the location of the valve and done. Tyre can be put back on.

  • Good quality
Automatic translation

Frequently bought together


Related products

Related products

Schwalbe Adhesive High Pressure
Schwalbe Adhesive High Pressure
4,90
This product
Schwalbe High Pressure Race
Schwalbe High Pressure Race
4,50
Schwalbe MTB
Schwalbe MTB
4,90
XLC Rubber
XLC Rubber
3,95
Compare the products above
Schwalbe Adhesive High Pressure Schwalbe High Pressure Race Schwalbe MTB XLC Rubber
Schwalbe Adhesive High Pressure Schwalbe High Pressure Race Schwalbe MTB XLC Rubber
36 reviews 20 reviews 15 reviews 0 reviews
Wheel Size 26 inch (650c) / 28 inch (700c) / 29 inch 28 inch (700c) 26 inch (650c) / 28 inch (700c) / 29 inch
Type of rimtape Adhesive Tape Plastic Plastic
Rim Tape Width 15 mm / 18 mm 16 mm / 18 mm / 22 mm 20 mm 15 mm
4,90 4,50 4,90 3,95
This product View product View product View product