Reviews over the

Shimano Dura Ace BB92

Easy to fit, driven about 1000km with it now and runs well.

Pros & Cons

Wilier bought in 2001 with Dura ace fitted, bottom bracket just replaced now, so is just a good product for this price

Pros & Cons

Got these fitted to replace my old 105 BB. Check carefully what you want to buy from Shimano as their naming can be confusing. Dura-Ace = BB92 / Ultegra = BB72 / 105 = BB71. The width of all of them is 86.5mm and are interchangeable of each type. So the number in the name does not refer to the width at Shimano.

Pros & Cons

A bottom bracket bearing that lasts quite a long time. The price difference with cheaper versions is small. This makes choosing this bearing the obvious choice.

Pros & Cons

Is perfectly what I expected from it. You get a box with 2 pouches in which on the one hand there is a cup with tube attached (you can take it apart if desired) and on the other hand the other cup. For mounting, you need a pressfit press. Then the tube clicks into the free cup and forms a whole. Be sure to check the diameter for your pressfit press.

Pros & Cons

Looking for an alternative to my already old and 'grainy' bottom bracket bearing (Shimano Hollowtech II BB71, Ultegra), I came across, among others, this Shimano Dura Ace BB92. It takes some puzzling to find the suitable types, but Mantel's search filters are a great help. Kudos. For mounting, you always have to know what you're doing, of course, in any case it was no problem with the help of two nuts/rings on a 10 mm threaded end. That this Dura Ace runs even lighter than the Ultegra is hard to compare, but I believe it immediately. Well worth the price (the difference)!

Pros & Cons

Changed my stock bottom bracket with this one. It's supposed to be better and lighter but I can't tell the difference from just riding my bike or spinning the crank even without chain.

Pros & Cons

Solid bottom bracket bearings at a good price .

Pros & Cons

Top

Pros & Cons

Top quality and reasonably affordable for Dura Ace quality

Pros & Cons

Easy to install BB. using special tool.

Pros & Cons

Top product, as always.

Pros & Cons

Easy to install and lightweight, very good product

Pros & Cons

I was helped extremely well and the same thing happened last time. Good experienced bike enthusiasts or amateur cyclists who know what you are talking about.

Pros & Cons

In my bottom bracket was a Tiagra bottom bracket, after too few miles all coffee grinder. I replaced it with the Dura Ace bottom bracket, heavens dear, what a smoothness!

Pros & Cons

Will last 20,000 km. Preventive replacement now

Pros & Cons

And also expertly assembled at the service point in Apeldoorn.

Pros & Cons

Does its job and is very light, but I still prefer alu BB cups in terms of price/quality.

Pros & Cons

Perfect

Pros & Cons

.

Pros & Cons

Is itself already greased upon arrival!

Fine bearing.

Pros & Cons

Used this bottom bracket because the current one was creaking after using it all winter and a season. with the right tools it was easy to assemble and after that I was able to ride crackle-free again.

Pros & Cons

Pros & Cons

Pros & Cons

Delivered ahead of schedule will use again

Pros & Cons

Very easy to fit with B.B. press tool. I was impressed by the improvement In smoothness and sped, almost like an extra gear

Pros & Cons