Netherlands (English)
België
Deutschland
Finland
Ireland
Luxembourg
Portugal
Poland
Österreich
France
España
Italia
Sverige
Danmark
BBB Cycling BracketKit BTL-95 Bottom Bracket Tool
- Ordered before 22:00, delivered tomorrow
- Free tracked delivery
Ask a question about this product
Try in store
Available directly in-store, or order online.
Pros & Cons
Pros & Cons
- Due to different fits, this set can be used for multiple bicycles.
- The set is very durable.
Specifications
Specifications
| Brand | BBB Cycling | |
| What sort of bottom bracket do you want to replace? | Pressfit | |
| Suitable for crankset axle size | SRAM GXP (22 / 24 mm) / Shimano Hollowtech II (24 mm) / BB30 (30 mm) | |
| Quality | Better |
The tools can be used for BB30, PF30, PF85-92, BB90-95 cranks. The set can be used in combination with 22, 24 and 30 mm crank axles. This means you can mount Sram GXP, Shimano Hollowtech II and BB30 with these bearings. The tools are kept in place and protected by foam.
1: BTL-13 Hexagon, 8mm
2: Collet, 24mm
3: Bearing guide A
4: Bearing guide B
5: Collet, 30mm
6: Installation pin
7: Extraction pin
Reviews
Reviews
Photos from customers
Most recent reviews
5 / 5
great tool
It’s handy for working with, and for removing the bracket bearing and pressing a new one into place. I did have to use a hammer and a wooden block to absorb the impact, but I managed to get it out in the end.
5 / 5
Onmisbaar als je zelf je fiets wil onderhouden.
Verwijderen en vervangen van de lagers is hiermee een fluitje van een cent, dit kan iedereen. Meteen gebruikt.
Pros & Cons
4 / 5
Good product
Easy to use
Pros & Cons
4 / 5
Poems complete set for BB replacement
Compete set to replace BB press bearing, you just need to purchase a new BB low
Pros & Cons
1 / 5
Not compatible with SRAM GXP 22/24 mm
Purchased to remove/install BB86 bearings (22/24 mm) on a road bike with SRAM GXP bottom bracket. The little tool to remove the bearings is impractical. The blades that should support the bearing on the inside shoot through when pressure is applied (attempts to stop the blades with a 22 mm bushing were in vain). I did not manage to remove the bearings with this tool. In the end, I bought the parktool BBT-90.3 with which it was a piece of cake (I can recommend it to everyone). The bearing press for installing the bearings is fine. In summary, the combi set seems handy but for SRAM GXP bracket with 22/24 mm bearings not suitable in my opinion. Bad buy!
Pros & Cons
1
Not compatible with SRAM GXP 22/24 mm
Purchased to remove/install BB86 bearings (22/24 mm) on a road bike with SRAM GXP bottom bracket. The little tool to remove the bearings is impractical. The blades that should support the bearing on the inside shoot through when pressure is applied (attempts to stop the blades with a 22 mm bushing were in vain). I did not manage to remove the bearings with this tool. In the end, I bought the parktool BBT-90.3 with which it was a piece of cake (I can recommend it to everyone). The bearing press for installing the bearings is fine. In summary, the combi set seems handy but for SRAM GXP bracket with 22/24 mm bearings not suitable in my opinion. Bad buy!
-
Bearing press functions fine
-
Neat storage case
-
Cheap is expensive
-
Not for SRAM XDS bottom bracket with 22/24 mm bearings
Frequently bought together
Frequently bought together
Related products
Related products
|
|
|
|
|
| BBB Cycling BracketKit BTL-95 | Park Tool BBT-90.3 Brackettool | PRO Bottom Bracket Press | Park Tool BBT-30.4 Pressfit | |
| 84 reviews | 38 reviews | 28 reviews | 47 reviews | |
| What sort of bottom bracket do you want to replace? | Pressfit | Pressfit | Pressfit | Pressfit |
| Suitable for crankset axle size | SRAM GXP (22 / 24 mm) / Shimano Hollowtech II (24 mm) / BB30 (30 mm) | SRAM GXP (22 / 24 mm) / Shimano Hollowtech II (24 mm) | Shimano Hollowtech II (24 mm) / BB30 (30 mm) | BB30 (30 mm) |
| Quality | Better | Best | Better | Best |
| 74,95 | 59,95 | 37,95 | 48,95 | |
| This product | View product | View product | View product |