Nederland
België
Deutschland
Finland
Ireland
Luxembourg
Portugal
Poland
Österreich
France
España
Italia
Sverige
Danmark
BBB Cycling BracketKit BTL-95 Bottom Bracket Tool
- Delivery in 3 working days
- Free tracked shipping over 400,00 zł
- Trustpilot rating 4.6/5
- Easy returns
Ask a question about this product
Email Customer Service
Pros & Cons
Pros & Cons
- Due to different fits, this set can be used for multiple bicycles.
- The set is very durable.
Specifications
Specifications
| Brand | BBB Cycling | |
| What sort of bottom bracket do you want to replace? | Pressfit | |
| Suitable for crankset axle size | SRAM GXP (22 / 24 mm) / Shimano Hollowtech II (24 mm) / BB30 (30 mm) | |
| Quality | Better |
The tools can be used for BB30, PF30, PF85-92, BB90-95 cranks. The set can be used in combination with 22, 24 and 30 mm crank axles. This means you can mount Sram GXP, Shimano Hollowtech II and BB30 with these bearings. The tools are kept in place and protected by foam.
1: BTL-13 Hexagon, 8mm
2: Collet, 24mm
3: Bearing guide A
4: Bearing guide B
5: Collet, 30mm
6: Installation pin
7: Extraction pin
Reviews
Reviews
Photos from customers
Most recent reviews
4 / 5
Poems complete set for BB replacement
Compete set to replace BB press bearing, you just need to purchase a new BB low
Pros & Cons
1 / 5
Not compatible with SRAM GXP 22/24 mm
Purchased to remove/install BB86 bearings (22/24 mm) on a road bike with SRAM GXP bottom bracket. The little tool to remove the bearings is impractical. The blades that should support the bearing on the inside shoot through when pressure is applied (attempts to stop the blades with a 22 mm bushing were in vain). I did not manage to remove the bearings with this tool. In the end, I bought the parktool BBT-90.3 with which it was a piece of cake (I can recommend it to everyone). The bearing press for installing the bearings is fine. In summary, the combi set seems handy but for SRAM GXP bracket with 22/24 mm bearings not suitable in my opinion. Bad buy!
Pros & Cons
2 / 5
Removal is a drama, placement well to do.
The tool for insertion is very straightforward. This is doable with this tool even for someone with two left hands. Be careful not to turn the bearings the deep. Removing a pressed-in bearing is a bit more difficult. The tool damages the side of the bearing, making it unusable. There is also a risk of driving the second cup out crookedly, as there is no cenctre ring for the extruder included. The three pallets of the 24mm extruder, work if they stay in place properly. Tip to keep the 3 pallets together is to double wrap a thicker rubber o-ring around them. This will hold things together better. Another tip, don't drive the first cup out completely straight away, and use it as a centring ring for the second one. In short, I managed to replace firmly stuck bearings with this tool, provided damage to the inside of the cups (24 mm). However, if you want to use the tool to do a thorough cleaning and reuse the bearings, I do not recommend this way of extruding a bearing....
Pros & Cons
5 / 5
The BBB Cycling BTL-95 bottom bracket spanner is a solid and easy-to-use tool
The BBB Cycling BTL-95 bottom bracket spanner is a reliable and sturdy tool for replacing your press fit bottom bracket. It offers excellent grip and makes loosening and tightening the bottom bracket effortless. Ideal for do-it-yourselfers.
Pros & Cons
4 / 5
Nice case with high-quality tools.
Nice set, everything is there to replace or maintain your bottom bracket bearing /BB. A bit tricky to knock out the BB with the "impact bolt", but works well if you position it correctly.
Pros & Cons
1
Not compatible with SRAM GXP 22/24 mm
Purchased to remove/install BB86 bearings (22/24 mm) on a road bike with SRAM GXP bottom bracket. The little tool to remove the bearings is impractical. The blades that should support the bearing on the inside shoot through when pressure is applied (attempts to stop the blades with a 22 mm bushing were in vain). I did not manage to remove the bearings with this tool. In the end, I bought the parktool BBT-90.3 with which it was a piece of cake (I can recommend it to everyone). The bearing press for installing the bearings is fine. In summary, the combi set seems handy but for SRAM GXP bracket with 22/24 mm bearings not suitable in my opinion. Bad buy!
-
Bearing press functions fine
-
Neat storage case
-
Cheap is expensive
-
Not for SRAM XDS bottom bracket with 22/24 mm bearings
2
Removal is a drama, placement well to do.
The tool for insertion is very straightforward. This is doable with this tool even for someone with two left hands. Be careful not to turn the bearings the deep. Removing a pressed-in bearing is a bit more difficult. The tool damages the side of the bearing, making it unusable. There is also a risk of driving the second cup out crookedly, as there is no cenctre ring for the extruder included. The three pallets of the 24mm extruder, work if they stay in place properly. Tip to keep the 3 pallets together is to double wrap a thicker rubber o-ring around them. This will hold things together better. Another tip, don't drive the first cup out completely straight away, and use it as a centring ring for the second one. In short, I managed to replace firmly stuck bearings with this tool, provided damage to the inside of the cups (24 mm). However, if you want to use the tool to do a thorough cleaning and reuse the bearings, I do not recommend this way of extruding a bearing....
-
Installation of brackets (24 and 30 mm shaft) is an e
-
No centring ring for removal of second cup.
-
Removing them is a drama
5
The BBB Cycling BTL-95 bottom bracket spanner is a solid and easy-to-use tool
The BBB Cycling BTL-95 bottom bracket spanner is a reliable and sturdy tool for replacing your press fit bottom bracket. It offers excellent grip and makes loosening and tightening the bottom bracket effortless. Ideal for do-it-yourselfers.
-
Complete set
-
Solid
-
Slightly expensive
4
Nice case with high-quality tools.
Nice set, everything is there to replace or maintain your bottom bracket bearing /BB. A bit tricky to knock out the BB with the "impact bolt", but works well if you position it correctly.
-
Easy
-
Fits well
-
Works smoothly
-
"Knocking out" the bottom bracket is a bit of a fiddle
-
Watch carefully when you stop tightening
Frequently bought together
Frequently bought together
Recommended by the product specialist
Recommended by the product specialist
Related products
Related products
|
|
|
|
|
| BBB Cycling BracketKit BTL-95 | Park Tool BBT-90.3 Brackettool | PRO Bottom Bracket Press | Park Tool BBT-30.4 Pressfit | |
| 81 reviews | 37 reviews | 28 reviews | 47 reviews | |
| What sort of bottom bracket do you want to replace? | Pressfit | Pressfit | Pressfit | Pressfit |
| Suitable for crankset axle size | SRAM GXP (22 / 24 mm) / Shimano Hollowtech II (24 mm) / BB30 (30 mm) | SRAM GXP (22 / 24 mm) / Shimano Hollowtech II (24 mm) | Shimano Hollowtech II (24 mm) / BB30 (30 mm) | BB30 (30 mm) |
| Quality | Better | Best | Better | Best |
| 345,40 | 262,30 | From 192,30 | From 214,10 | |
| This product | View product | View product | View product |