Nederland
Belgique (Français)
Deutschland
Finland
Ireland
Luxembourg
Portugal
Poland
Österreich
France
España
Italia
Sverige
Danmark
Crankbrothers Mallet 2
Crankbrothers Mallet 2
1/3
Malheureusement ce produit est épuisé et il ne sera plus disponible dans notre assortiment.
Posez une question sur ce produit
Tester en magasin
Une grande partie de notre assortiment est en stock dans nos magasins et prêt à être essayé, ajusté et testé sans rendez-vous.
Notre assortiment complet est disponible en ligne. Vous pouvez commander et payer des produits en ligne et les faire livrer gratuitement dans l'un de nos Superstores. Ainsi, vous pouvez tout essayer. Pas satisfait ? Vous pouvez les retourner gratuitement en magasin et être remboursé.
Est-ce que ces informations vous ont aidé ?
Caractéristiques techniques
Caractéristiques techniques
| Marque | Crankbrothers | |
| Matériau de l'axe de pédale | Acier Chromé | |
| Matériau du corps de pédale | Aluminium | |
| Cales fournies | Oui | |
| Mécanisme automatique | Deux côtés | |
| Tension réglable | Non | |
| Type de roulement | Roulement à billes / Bague | |
| Matériau de la chape | Aluminium | |
| Couleur | Gris |
The power of the CrankBrothers Mallet 2 pedal is that you can use this pedal with your clipless shoes and as a full worthy flat pedal. The clipless pedals are inspired by the famous Eggbeaters. Unbeatable in the mudd. Clipping-in works always, even during the toughest and roughest conditions. The flat base around its system is made out of aluminium and polycarbonate. The aluminium base is placed on the outside in order to absorb impacts.
On both sides you can place six metal pins of eight millimeter to ensure extra grip with your Five Ten shoes. You can decide how much grip you want by screwing the pins in or out.
The Mallet 2 uses Enduro industry bearings on the outside and a Igus LL-plain bearing. They also use a double seal to ensure your bearing is protected from mud and other debris. If your bearings do become worn through heavy use, you can replace them with a simple service kit and your pedals are as good as new.
On both sides you can place six metal pins of eight millimeter to ensure extra grip with your Five Ten shoes. You can decide how much grip you want by screwing the pins in or out.
The Mallet 2 uses Enduro industry bearings on the outside and a Igus LL-plain bearing. They also use a double seal to ensure your bearing is protected from mud and other debris. If your bearings do become worn through heavy use, you can replace them with a simple service kit and your pedals are as good as new.