Groupe SRAM RED XPLR E1
Groupe SRAM RED XPLR E1
Prix conseillé 3.945,-
A partir de 2.480,-
- Commandé avant 22:00, livré le lendemain
- Livraison gratuite
Points forts & points faibles
Points forts & points faibles
- Uncompromising wherever the ride takes you, with the best 1x13 gravel groupset SRAM has to offer!
- Redesigned brake levers provide ultimate comfort combined with maximum braking power.
- Total weight of just 2488 grams.
- Full Mount technology eliminates the derailleur hanger, so you always have perfect shifting performance.
- Powerful internal clutch technology keeps the chain firmly in place, regardless of the terrain.
- Installation requires a frame with a specific UDH interface.
Caractéristiques techniques
Caractéristiques techniques
| Marque | SRAM | |
| Type de vélo | Vélo de route / Vélo gravel | |
| Position de mesure | Étoile | |
| Type de transmission | Électronique | |
| Type de roue libre | SRAM XDR 12/13 vitesses | |
| Source d'alimentation | Non | |
| Type de pile | CR2032 | |
| Adapté à | SRAM / SRAM Red AXS | |
| Type de pédalier | Mono |
The SRAM RED XPLR E1 gravel groupset is the best SRAM gravel groupset of the moment. Unmatched performance and superior confidence out there. Thanks to the innovative Full Mount rear derailleur, traditional adjustment screws are definitively unnecessary, which directly results in flawless shifting on rough terrain. Combined with redesigned, powerful brakes and superior chain management, this drivetrain offers absolute confidence out there.
Direct UDH mounting
The rear derailleur uses a robust Full Mount construction that attaches directly to the UDH interface of the frame. As a result, the entire system centres itself around the rear axle and a traditional derailleur hanger is no longer needed. This design removes possible tolerances from the equation, so you shift with extreme accuracy without the need for fine adjustment. In addition, this way of mounting delivers extremely high resistance to impact. A powerful internal clutch in the derailleur keeps the chain tight and firmly in place at all times, which guarantees a safe and smooth drivetrain over the most challenging stretches.
Redesigned ergonomic shifters
The shifters of this groupset have been thoroughly reviewed, both visually and functionally. Thanks to a raised pivot point and a newly shaped brake lever, the leverage has been greatly optimised. This makes braking considerably less effort and you can slow down in a controlled way with just one finger. Braking from the hoods requires eighty percent less force, and from the drops it is thirty-three percent lighter. The hoods also feature an ergonomic fit and textured rubber, which provides maximum and comfortable grip in all weather conditions.
Optional power meter
With this groupset you have the choice of a crankset with an integrated power meter. The sensors are fully and discreetly built into the spindle of the lightweight and slim aluminium crankset. This seamless integration means no unnecessary grams are added to the bike, while the unit still delivers extremely reliable power data with a high measurement accuracy of 1.5 percent.
Direct UDH mounting
The rear derailleur uses a robust Full Mount construction that attaches directly to the UDH interface of the frame. As a result, the entire system centres itself around the rear axle and a traditional derailleur hanger is no longer needed. This design removes possible tolerances from the equation, so you shift with extreme accuracy without the need for fine adjustment. In addition, this way of mounting delivers extremely high resistance to impact. A powerful internal clutch in the derailleur keeps the chain tight and firmly in place at all times, which guarantees a safe and smooth drivetrain over the most challenging stretches.
Redesigned ergonomic shifters
The shifters of this groupset have been thoroughly reviewed, both visually and functionally. Thanks to a raised pivot point and a newly shaped brake lever, the leverage has been greatly optimised. This makes braking considerably less effort and you can slow down in a controlled way with just one finger. Braking from the hoods requires eighty percent less force, and from the drops it is thirty-three percent lighter. The hoods also feature an ergonomic fit and textured rubber, which provides maximum and comfortable grip in all weather conditions.
Optional power meter
With this groupset you have the choice of a crankset with an integrated power meter. The sensors are fully and discreetly built into the spindle of the lightweight and slim aluminium crankset. This seamless integration means no unnecessary grams are added to the bike, while the unit still delivers extremely reliable power data with a high measurement accuracy of 1.5 percent.
Fully wireless and customisable shifting
The RED XPLR E1 groupset is fully wireless and, thanks to the AXS integration, can be configured entirely to your personal preferences. The shifters are equipped with two extra buttons to which you can assign a function yourself via the app. A very innovative detail of the rear derailleur is the Magic Wheel. On this lower derailleur pulley, the outer ring rotates independently of the centre section. As a result, the drivetrain does not lock up if a twig or a build-up of leaves unexpectedly gets stuck in the pulley. Should the derailleur still get damaged after a hard crash, several vulnerable parts have a modular design and can therefore be replaced quickly.
Optimal range and durability
The well-balanced combination of chain and cassette provides an ideal spread of gear ratios. This way you will always find the right cadence on any unpaved surface and on the steepest gravel climbs. To maximise service life, both the cassette and the chain are fitted with a high-quality nickel-chrome coating. This hard finish offers excellent protection against rust and wear from sand and mud. This considerably increases the durability of the complete drivetrain, so you can keep riding the trails carefree for much longer before these wear parts need replacing.
X-Sync Pulleys
With the SRAM X-Sync Pulleys you are assured of maximum performance combined with excellent durability. The long, square teeth of the X-SYNC™ design engage the chain noticeably faster and more firmly than conventional triangular teeth. Both the chainrings and the derailleur pulleys with this X-SYNC™ profile together form the indispensable foundation of the entire drivetrain.
The RED XPLR E1 groupset is fully wireless and, thanks to the AXS integration, can be configured entirely to your personal preferences. The shifters are equipped with two extra buttons to which you can assign a function yourself via the app. A very innovative detail of the rear derailleur is the Magic Wheel. On this lower derailleur pulley, the outer ring rotates independently of the centre section. As a result, the drivetrain does not lock up if a twig or a build-up of leaves unexpectedly gets stuck in the pulley. Should the derailleur still get damaged after a hard crash, several vulnerable parts have a modular design and can therefore be replaced quickly.
Optimal range and durability
The well-balanced combination of chain and cassette provides an ideal spread of gear ratios. This way you will always find the right cadence on any unpaved surface and on the steepest gravel climbs. To maximise service life, both the cassette and the chain are fitted with a high-quality nickel-chrome coating. This hard finish offers excellent protection against rust and wear from sand and mud. This considerably increases the durability of the complete drivetrain, so you can keep riding the trails carefree for much longer before these wear parts need replacing.
X-Sync Pulleys
With the SRAM X-Sync Pulleys you are assured of maximum performance combined with excellent durability. The long, square teeth of the X-SYNC™ design engage the chain noticeably faster and more firmly than conventional triangular teeth. Both the chainrings and the derailleur pulleys with this X-SYNC™ profile together form the indispensable foundation of the entire drivetrain.
• SRAM RED AXS E1 shifters/brake calipers front and rear
• SRAM RED AXS XPLR E1 rear derailleur
• SRAM RED E1 Flattop chain (including quick link)
• SRAM RED E1 XPLR Wide DUB crankset + SRAM RED E1 chainring in the selected size / SRAM Quarq RED XPLR E1 crankset with power meter and 42T chainring
• SRAM RED XG-1391 E1 XPLR 13-speed cassette
• SRAM Rotor Paceline centerlock brake discs 160/160
• SRAM eTap USB-C battery charger, without cable
• SRAM eTap AXS battery
Excluding bottom bracket
• SRAM RED AXS XPLR E1 rear derailleur
• SRAM RED E1 Flattop chain (including quick link)
• SRAM RED E1 XPLR Wide DUB crankset + SRAM RED E1 chainring in the selected size / SRAM Quarq RED XPLR E1 crankset with power meter and 42T chainring
• SRAM RED XG-1391 E1 XPLR 13-speed cassette
• SRAM Rotor Paceline centerlock brake discs 160/160
• SRAM eTap USB-C battery charger, without cable
• SRAM eTap AXS battery
Excluding bottom bracket
Posez une question sur ce produit
Tester en magasin
Disponible directement en magasin ou commandez en ligne.
Fréquemment achetés ensemble
Fréquemment achetés ensemble
Recommandé par le spécialiste des produits
Recommandé par le spécialiste des produits
Produits similaires
Produits similaires
|
|
|
|
|
|
| SRAM RED XPLR E1 | Campagnolo Record X 1x13s GRAVEL WRL | Campagnolo Super Record X 1x13 Speed Gravel | SRAM Rival XPLR E1 1x13 | |
| Type de vélo | Vélo de route / Vélo gravel | Vélo de route / Vélo gravel | ||
| Position de mesure | Étoile | Étoile | ||
| Type de transmission | Électronique | Électronique | ||
| Type de roue libre | SRAM XDR 12/13 vitesses | Campagnolo N3W 10-13 vitesses | ||
| Source d'alimentation | Non | Non | ||
| Type de pile | CR2032 | |||
| A partir de 2.480,- | 1.980,- | 2.809,95 | A partir de 1.039,95 | |
| Ce produit | Voir le produit | Voir le produit | Voir le produit |
Toutes les caractéristiques techniques
Général
Marque
SRAM
Type de vélo
Vélo de route / Vélo gravel
Type de transmission
Électronique
Source d'alimentation
Non
Type de pile
CR2032
Adapté à
SRAM / SRAM Red AXS
Type de pédalier
Mono
Type
Mono
Pédalier Sram
Red
Type de plateau
Mono-plateau
Entraxe
Sram Direct-Mount
Fixation
Centerlock
Capacité maximale
46D
Composition
Frein Avant / Frein Arrière
Raccord
SRAM
Ajustement de l'axe de pédalier
SRAM DUB Wide
Compatible avec
SRAM
Matériau du levier de frein
Carbone
Levier réglable
Oui
Compatible avec
Freins à disque
Comptabilité
Bluetooth/ANT+
Qualité
Niveau supérieur
Discipline
Route / Gravel
Cadence
Oui
Le pignon de cassette le plus grand
46T
Type de plateau
Rond
Nombre de maillons
126 maillons
Type
Gauche / Droite
Modèle écrou de serrage
Interne
Type de frein
Hydraulique
Poids
288 grammes
Type de vélo
Vélo de route
Quel groupe avez-vous ?
SRAM Red / SRAM RED AXS / SRAM Rival AXS XPLR E1
Type de fermeture
Attache rapide
Supporte
Non
Commander avec
Aucun accessoire
Type de frein
Frein à disque Flat Mount
Nombre de vitesses
13 vitesses
Type
1x13
Type de transmission
Électronique
Type de pédalier (Axe)
Dub
Denture de la Cassette
10 / 46
Longueur de la chape
Chape longue
Type de pédalier
Mono-plateau
Dérailleur avant
N/A
Couleur
Noir / Argent
Diamètre Disque de Frein
160 mm à l'avant / 160 mm à l'arrière
Emballage
Emballage d'usine
Connectivité
Connecteur
USB-C
Composants
Type de roue libre
SRAM XDR 12/13 vitesses
Taille
Position de mesure
Étoile
Mesure
Bilatéral
Dimensions
Longueur
950 mm / 1800 mm
Diamètre
160 mm