Roues Vélo Route Bontrager Aeolus Pro 5 TLR Disc Scratch & Dent
Roues Vélo Route Bontrager Aeolus Pro 5 TLR Disc Scratch & Dent
Malheureusement ce produit est épuisé et il ne sera plus disponible dans notre assortiment.
Posez une question sur ce produit
Envoyez un e-mail au service client

Caractéristiques techniques
Caractéristiques techniques
Marque | Bontrager | |
Matériau de la jante | Carbone | |
Hauteur de la jante | 50 mm | |
Largeur de la jante (interne) | 19,5 mm | |
Largeur de la jante | 27 mm | |
Type de pneu | Pneu à tringle souple / Tubeless | |
Caractéristique(s) des roues | Roues aérodynamiques / Roues extra-confortables | |
Matériau des rayons | Acier inoxydable | |
Matériau de l'écrou de rayon | Aluminium |
The Bontrager Aeolus Pro 5 TLR Disc Scratch & Dent wheels are slightly damaged / scratched during the production process but are otherwise completely fine and new. The wheels are the perfect balance between durability, weight and aerodynamics, and they have been praised for their versatility in various tests. The 50mm high OCLV carbon tubeless ready rim has a rim width of 19.5 mm, which is suitable for tubeless TLR tyres. The Aeolus Pro 5 wheels are fitted with DT Swiss Aerolite spokes and Alpina spoke nipples; quality guaranteed.
Scratch & Dent Programme and Trek Carbon Care.
Wheels in the Scratch & Dent Program are slightly damaged due to a manufacturing defect. This damage does not affect the performance or durability of the wheel. These wheels have the same warranty as any Bontrager wheel, and are also covered by Trek's Carbon Care program. This means that if your Bontrager carbon wheels are damaged in a crash within two years of purchase, Trek will repair or replace them. See the attached photos for an example of a Scratch & Dent.
Tubeless Ready
Bontrager (TLR) rims allow for a quick conversion to tubeless systems. You can easily switch between the familiar clincher or a tubeless setup. After fitting Tubeless tape and Tubeless ready tyres you just need to fit the Tubeless ready valves and add the sealant.
Aerodynamics
The D3 Dual Directional Design rim profile reduces air resistance around the tyre and rim. The tyres fully encircle the D-section of the rim, minimising air pockets. This provides more stability in windy conditions. This allows Bontrager to compete with the Zipp's and ENVE's of this world in the wind tunnel and on the road.
OCLV Pro carbon
OCLV Pro carbon offers the optimum mix of lightweight, strength and durability. These wheels have gone through rigorous testing and checks to ensure they can withstand competition and daily use. The Bontrager Aeolus Pro 5 TLR Disc effectively leverages Bontrager's expertise in carbon manufacturing. Thanks to the Aeolus design and the efficiency of the manufacturing process, Bontrager currently offers the best value for money in carbon racing wheels.
Scratch & Dent Programme and Trek Carbon Care.
Wheels in the Scratch & Dent Program are slightly damaged due to a manufacturing defect. This damage does not affect the performance or durability of the wheel. These wheels have the same warranty as any Bontrager wheel, and are also covered by Trek's Carbon Care program. This means that if your Bontrager carbon wheels are damaged in a crash within two years of purchase, Trek will repair or replace them. See the attached photos for an example of a Scratch & Dent.
Tubeless Ready
Bontrager (TLR) rims allow for a quick conversion to tubeless systems. You can easily switch between the familiar clincher or a tubeless setup. After fitting Tubeless tape and Tubeless ready tyres you just need to fit the Tubeless ready valves and add the sealant.
Aerodynamics
The D3 Dual Directional Design rim profile reduces air resistance around the tyre and rim. The tyres fully encircle the D-section of the rim, minimising air pockets. This provides more stability in windy conditions. This allows Bontrager to compete with the Zipp's and ENVE's of this world in the wind tunnel and on the road.
OCLV Pro carbon
OCLV Pro carbon offers the optimum mix of lightweight, strength and durability. These wheels have gone through rigorous testing and checks to ensure they can withstand competition and daily use. The Bontrager Aeolus Pro 5 TLR Disc effectively leverages Bontrager's expertise in carbon manufacturing. Thanks to the Aeolus design and the efficiency of the manufacturing process, Bontrager currently offers the best value for money in carbon racing wheels.
At 1699 grams, it is not the lightest wheelset for biking in the hills.
• Bontrager Aeolus Pro 5 TLR Disc wielen
• Valve core remover
• TLR valves
• Valve core remover
• TLR valves
Produits similaires
Produits similaires
|
|
|
|
|
Bontrager Aeolus Pro 5 TLR Disc Scratch & Dent | Shimano Ultegra R8170 C50 Disc | Newmen Advanced A.50 | Ubique R50C Disc Carbon | |
6 avis | 15 avis | 22 avis | ||
Type de roue | Paire de roues / Roue avant / Roue arrière | Paire de roues / Roue avant | Paire de roues / Roue avant / Roue arrière | Paire de roues |
Matériau de la jante | Carbone | Carbone | Carbone | Carbone |
Hauteur de la jante | 50 mm | 50 mm | 50 mm | 50 mm |
Largeur de la jante (interne) | 19,5 mm | 21 mm | 23 mm | 21 mm |
Largeur de la jante | 27 mm | 28 mm | 32,5mm | 28 mm |
Type de pneu | Pneu à tringle souple / Tubeless | Pneu à tringle souple / Tubeless | Pneu à tringle souple / Tubeless | Pneu à tringle souple / Tubeless |
A partir de 329,- | A partir de 574,95 | A partir de 399,- | A partir de 699,- | |
Ce produit | Voir le produit | Voir le produit | Voir le produit |
Toutes les caractéristiques techniques
Général
Marque
Bontrager
Type de pneu
Pneu à tringle souple / Tubeless
Caractéristique(s) des roues
Roues aérodynamiques / Roues extra-confortables
Type de frein
Frein à disque - Centerlock
Poids total maximum
120 kg
Couleur
Noir
Couleur de l'autocollant
Noir
Composants
Matériau de la jante
Carbone
Matériau des rayons
Acier inoxydable
Matériau de l'écrou de rayon
Aluminium
Type de rayon
Straight pull
Type d'écrou de rayon
Externe
Nombre de rayons de la roue avant
24
Nombre de rayons de la roue arrière
24
Type de roulements
à Billes
Type de roue libre
SRAM Race 10/11 vitesses / Shimano Race HG 9-12 vitesses 10 - 11 speed
Dimensions
Hauteur de la jante
50 mm
Largeur de la jante (interne)
19,5 mm
Largeur de la jante
27 mm
Largeur du moyeu arrière
142 x 12 mm axe traversant
Largeur du moyeu avant
100 x 12 mm axe traversant
Largeur de pneu adaptée
25 mm / 28 mm / 30 mm / 32 mm / 33 mm / 35 mm / 37 mm / 40 mm / 42 mm / 44 mm / 47 mm / 50 mm
Autre
Garantie
Garantie à vie
Garantie prolongée
Oui
Crash Replacement
Oui
Collection
2020
Dans la boîte
Patins de frein fournis
Non
Blocages de roue fournis
Non
Housses de roue fournies
Non