Ruedas de Carretera Bontrager Aeolus Pro 5 TLR Disc Scratch & Dent
Ruedas de Carretera Bontrager Aeolus Pro 5 TLR Disc Scratch & Dent
Este producto está agotado y no volverá a estar disponible en nuestro surtido de productos.
- Valoración de Trustpilot 4.7/5
- Devoluciones fáciles
Haz una pregunta sobre este producto.
Especificaciones
Especificaciones
| Marca | Bontrager | |
| Material de la llanta | Carbón | |
| Altura de la llanta | 50 mm | |
| Ancho de la llanta (interno) | 19,5 mm | |
| Ancho de la llanta | 27 mm | |
| Tipo de Cubierta | neumático plegable / Tubeless | |
| Característica(s) de las ruedas | Ruedas aerodinámicas / Ruedas extra cómodas | |
| Material del radio | Acero Inoxidable | |
| Material de la cabecilla de radio | Aluminio |
The Bontrager Aeolus Pro 5 TLR Disc Scratch & Dent wheels are slightly damaged / scratched during the production process but are otherwise completely fine and new. The wheels are the perfect balance between durability, weight and aerodynamics, and they have been praised for their versatility in various tests. The 50mm high OCLV carbon tubeless ready rim has a rim width of 19.5 mm, which is suitable for tubeless TLR tyres. The Aeolus Pro 5 wheels are fitted with DT Swiss Aerolite spokes and Alpina spoke nipples; quality guaranteed.
Scratch & Dent Programme and Trek Carbon Care.
Wheels in the Scratch & Dent Program are slightly damaged due to a manufacturing defect. This damage does not affect the performance or durability of the wheel. These wheels have the same warranty as any Bontrager wheel, and are also covered by Trek's Carbon Care program. This means that if your Bontrager carbon wheels are damaged in a crash within two years of purchase, Trek will repair or replace them. See the attached photos for an example of a Scratch & Dent.
Tubeless Ready
Bontrager (TLR) rims allow for a quick conversion to tubeless systems. You can easily switch between the familiar clincher or a tubeless setup. After fitting Tubeless tape and Tubeless ready tyres you just need to fit the Tubeless ready valves and add the sealant.
Aerodynamics
The D3 Dual Directional Design rim profile reduces air resistance around the tyre and rim. The tyres fully encircle the D-section of the rim, minimising air pockets. This provides more stability in windy conditions. This allows Bontrager to compete with the Zipp's and ENVE's of this world in the wind tunnel and on the road.
OCLV Pro carbon
OCLV Pro carbon offers the optimum mix of lightweight, strength and durability. These wheels have gone through rigorous testing and checks to ensure they can withstand competition and daily use. The Bontrager Aeolus Pro 5 TLR Disc effectively leverages Bontrager's expertise in carbon manufacturing. Thanks to the Aeolus design and the efficiency of the manufacturing process, Bontrager currently offers the best value for money in carbon racing wheels.
Scratch & Dent Programme and Trek Carbon Care.
Wheels in the Scratch & Dent Program are slightly damaged due to a manufacturing defect. This damage does not affect the performance or durability of the wheel. These wheels have the same warranty as any Bontrager wheel, and are also covered by Trek's Carbon Care program. This means that if your Bontrager carbon wheels are damaged in a crash within two years of purchase, Trek will repair or replace them. See the attached photos for an example of a Scratch & Dent.
Tubeless Ready
Bontrager (TLR) rims allow for a quick conversion to tubeless systems. You can easily switch between the familiar clincher or a tubeless setup. After fitting Tubeless tape and Tubeless ready tyres you just need to fit the Tubeless ready valves and add the sealant.
Aerodynamics
The D3 Dual Directional Design rim profile reduces air resistance around the tyre and rim. The tyres fully encircle the D-section of the rim, minimising air pockets. This provides more stability in windy conditions. This allows Bontrager to compete with the Zipp's and ENVE's of this world in the wind tunnel and on the road.
OCLV Pro carbon
OCLV Pro carbon offers the optimum mix of lightweight, strength and durability. These wheels have gone through rigorous testing and checks to ensure they can withstand competition and daily use. The Bontrager Aeolus Pro 5 TLR Disc effectively leverages Bontrager's expertise in carbon manufacturing. Thanks to the Aeolus design and the efficiency of the manufacturing process, Bontrager currently offers the best value for money in carbon racing wheels.
At 1699 grams, it is not the lightest wheelset for biking in the hills.
• Bontrager Aeolus Pro 5 TLR Disc wielen
• Valve core remover
• TLR valves
• Valve core remover
• TLR valves
Productos relacionados
Productos relacionados
|
|
|
|
|
|
| Bontrager Aeolus Pro 5 TLR Disc Scratch & Dent | Scope R5 Disc | Newmen Advanced A.50 | Bontrager Aeolus Elite 50 TLR Disc | |
| 6 opiniones | 8 opiniones | 9 opiniones | ||
| Tipo de rueda | Juego de ruedas / Rueda Delantera / Rueda Trasera | Juego de ruedas | Juego de ruedas / Rueda Delantera / Rueda Trasera | Juego de ruedas / Rueda Delantera / Rueda Trasera |
| Material de la llanta | Carbón | Carbón | Carbón | Carbón |
| Altura de la llanta | 50 mm | 57 mm | 50 mm | 50 mm |
| Ancho de la llanta (interno) | 19,5 mm | 21 mm | 23 mm | 19,5 mm |
| Ancho de la llanta | 27 mm | 28 mm | 32,5mm | 27 mm |
| Tipo de Cubierta | neumático plegable / Tubeless | neumático plegable / Tubeless | neumático plegable / Tubeless | neumático plegable / Tubeless |
| Desde 329,00 | Desde 848,00 | Desde 479,00 | Desde 399,00 | |
| Producto actual | Ver producto | Ver producto | Ver producto |
Todas las especificaciones
General
Marca
Bontrager
Tipo de Cubierta
neumático plegable / Tubeless
Característica(s) de las ruedas
Ruedas aerodinámicas / Ruedas extra cómodas
Tipo de freno
Freno de disco - Centerlock
Peso total máximo
120 kg
Color
Negro
Color del adhesivo
Negro
Componentes
Material de la llanta
Carbón
Material del radio
Acero Inoxidable
Material de la cabecilla de radio
Aluminio
Tipo de radio
Straight pull
Tipo de cabecilla de radio
Externo
Número de radios en la rueda delantera
24
Número de radios en la rueda trasera
24
Tipo de rodamientos
Industrial
Tipo de Núcleo
SRAM Race 10/11 velocidades / Shimano Race HG 9-12 velocidades 10 - 11 speed
Medidas
Altura de la llanta
50 mm
Ancho de la llanta (interno)
19,5 mm
Ancho de la llanta
27 mm
Ancho del buje trasero
142 x 12 mm eje
Ancho del buje delantero
100 x 12 mm eje
Ancho de neumático adecuado
25 mm / 28 mm / 30 mm / 32 mm / 33 mm / 35 mm / 37 mm / 40 mm / 42 mm / 44 mm / 47 mm / 50 mm
Otro
Garantía
Garantía de por vida
Extensión de garantía
Si
Reemplazo por accidente
Si
Colección
2020
En dotación
Pastillas de freno incluidas
No
Cierres rápidos incluidos
No
Bolsas para ruedas incluida
No