Dynamic Wet Lube

The Dynamic Wet Lube was developed especially for the wettest and muddiest conditions, when you want your chain to run smoothly and be protected against corrosion. That's what Wet Lube is for. Dynamic Wet Lube contains a little alcohol to help the oil penetrate quickly into the chain links and be distributed evenly on the chain. When the alcohol has evaporated, the chain is dry and well lubricated and resistant to water and sand. With the convenient cap the lubricant is easy to dose. We recommend reapplying the lube after about 250 km.

Dry lube or wet lube?
As the name suggests, dry lube is used in dry conditions. It makes sure that no dirt or dust sticks to your chain. As it is very thin, you'll have to reapply it frequently. Dry lube isn't very water repellent and offers less protection against corrosion. It's excellent for the summer, but it's not suitable for autumn and winter. A wet lube, on the other hand, lubricates much better in wet conditions and is also more water and dirt resistant, which is important in wet weather. It needs to be reapplied much less frequently. A wet lube does gather a bit more dirt than a dry lube.

Usage
Before application, degrease, clean and dry your chain.
How often should I lubricate my chain?
Lubricating your chain often ensures your material will last longer, so you'll enjoy your cycling fun for a longer time. How often you have to lubricate your bike strongly depends on the weather in which you ride. Do you go for a bike ride even in bad weather, do you only use your bike when the sun is out? It all affects your bike's wear and tear, and some will have to clean their bike more often than others.
In principle, a chain should run quietly, so if it makes noise it's due for cleaning and lubricating.

Suitable for use on the chain in wet weather conditions and all cycling disciplines, so suitable for your road bike, MTB, gravel bike, city bike or e-bike!

1 bottle Dynamic Wet Lube 100 ml

First-time application:
1. Thoroughly degrease your drivetrain with chain cleaner and rinse thoroughly.
2. Dry the parts well using a cloth.
3. Then apply the Lube to all links in the middle of the entire chain.
4. Allow the Lube to sit for at least half an hour, but preferably longer.
5. Then wipe off any excess Lube with a cloth, especially the outside of the chain, because that's where most of the dirt will stick and lubrication isn't needed.
6. Go for it!

When lubricating your chain later, wipe the chain down with a dry cloth or brush and then apply lubricant to every chain link.

When and how often should I lubricate my chain?
This is a tricky question as it depends on how much you ride and what kind of lubricant you use. The best thing to do is to watch out for a dry chain. This can be seen or heard. Another sign that you need to lubricate your chain is if your chain is very dirty, for example because you've been cycling in the rain. Make sure you first clean the chain before you lubricate it. Eventually you'll get a feeling for when you should lubricate your chain.