Nederland
Belgium (English)
Deutschland
Finland
Ireland
Luxembourg
Portugal
Poland
Österreich
France
España
Italia
Sverige
Danmark
- Ordered now, delivered on Monday
- Free tracked delivery
Ask a question about this product
Email Customer Service
Try in store
A large part of our assortment is in stock in our stores and ready to try, fit, and experience without an appointment.
Our full assortment is available online. You can order and pay for products online and have them delivered for free to one of our Superstores. This way, you can try everything out. Not satisfied? You can return it to the store free of charge and receive a refund.
Pros & Cons
Pros & Cons
- This cassette is very durable due to the use of a special coating.
- With this cassette you have the right gear for every terrain.
- This cassette is slightly heavier than the XTR version.
Specifications
Specifications
| Brand | Shimano | |
| Number of gears | 11 speed | |
| Body Type | SRAM MTB 9/10 speed / Shimano MTB HG 9-11 speed | |
| Quality | Better | |
| Bike Type | Mountain bike | |
| Suitable for | Shimano | |
| Colour | Grey |
This cassette is ground with precision and has been fitted with chain lines to allow the chain to smoothly change gears. . This can be seen in some of the teeth, which are partially ground down. This sharpening gives better shifting for both 1x11, 2x11 and a 3x11 drivetrain.
More sustainable thanks to steel sprockets
The cassette is made of an aluminium spider with sprockets made of steel. This makes the cassette both lightweight and very durable. This means that the cassette will survive many a muddy ride in the forest and will give you the best possible support!
Gear ratios
This Shimano Deore XT M8000 cassette is available in three versions with wide gearing, where the 11-46 is especially made for 1x cranksets.
11-40: 11, 13, 15, 17, 19, 21, 24, 27, 31, 35, 40
11-42: 11, 13, 15, 17, 19, 21, 24, 28, 32, 37, 42
11-46: 11, 13, 15, 17, 19, 21, 24, 28, 32, 37, 46
11/46 should not be used in combination with a double/triple, but is specifically made for a single chainring.
To assemble and disassemble this cassette you will need specific cassette tools. These can be found here.
Don't forget the assembly grease!
The lockring on your cassette should be tightened up, in most cases up to 40Nm. To be able to loosen the cassette, we recommend you to apply a little bit of assembly paste to the lockring. Our assembly greases can be found here.
October to March:
• Clean every 200 km
• Rinse after every ride
• Dry and oil the chain after every ride
• Leave the bike to dry at room temperature
April to September:
• Clean every 300 km
• Rinse off after cycling in the rain
• Dry and oil the chain after polishing or rinsing
• Leave the bike to dry at room temperature
Reviews
Reviews
Photos from customers
Most recent reviews
5 / 5
excellent
Great product and fast delivery
5 / 5
Great product at a great price
Fast delivery and as expected a great product
Pros & Cons
4 / 5
Mooie robuuste cassette een aanwinst voor je gravelbike of mbt
Stevige mooie cassette voor een vriendelijke prijs waar je weer een aantal km mee kan crossen
Pros & Cons
5 / 5
Everything is fine
As always, top quality from Shimano and fast delivery from Mantel
5 / 5
Must-have to an xt conversion
A nice, large cassette with enough range for my 1x11 cross hybrid. I converted my cross hybrid from a 3x10 to a 1x11 Shimano XT drivetrain. This cassette from the mountain bike range, fits the standard 35mm HG freehubs without any modifications. On the largest sprocket, the drive makes slightly more noise because of the chainline, which is now slightly less optimal. But the chain stays on without any problems. Even when riding on rough terrain. The cassette shifts smoothly, even under tension. The freewheel and shifting also sound a bit louder now, probably due to the use of an aluminium spider at the rear. All in all, a nice addition to my XT conversion.
Pros & Cons
5
Must-have to an xt conversion
A nice, large cassette with enough range for my 1x11 cross hybrid. I converted my cross hybrid from a 3x10 to a 1x11 Shimano XT drivetrain. This cassette from the mountain bike range, fits the standard 35mm HG freehubs without any modifications. On the largest sprocket, the drive makes slightly more noise because of the chainline, which is now slightly less optimal. But the chain stays on without any problems. Even when riding on rough terrain. The cassette shifts smoothly, even under tension. The freewheel and shifting also sound a bit louder now, probably due to the use of an aluminium spider at the rear. All in all, a nice addition to my XT conversion.
-
Build quality
-
Fast shifts
-
Fits the standard 35mm HG freehub
-
Fewer intermediate shifts compared to HG500 cassettes
-
Slightly more noise due to the larger chainline
Frequently bought together
Frequently bought together
Recommended by the product specialist
Recommended by the product specialist
Related products
Related products
|
|
|
|
|
| Shimano XT M8000 | Shimano SLX M7000 | Shimano Deore CS-M5100 11-speed | Shimano Cues CS-LG400 11 Speed | |
| 131 reviews | 102 reviews | 3 reviews | ||
| Number of gears | 11 speed | 11 speed | 11 speed | 11 speed |
| Body Type | SRAM MTB 9/10 speed / Shimano MTB HG 9-11 speed | SRAM MTB 9/10 speed / Shimano MTB HG 9-11 speed | SRAM MTB 9/10 speed / Shimano MTB HG 9-11 speed | Shimano MTB HG 9-11 speed |
| Cassette Ratio | 11 / 40 / 11 / 42 / 11 / 46 | 11 / 40 / 11 / 42 / 11 / 46 | 11 / 42 / 11 / 51 | 11 / 45 / 11 / 50 |
| Quality | Better | Good | Good | Good |
| Bike Type | Mountain bike | Mountain bike / E-bike / City and Hybrid bike | Mountain bike | Mountain bike / Gravel bike / E-bike |
| Suitable for | Shimano | Shimano | Shimano Deore | Shimano Cues |
| From 68,95 | 59,95 | From 44,95 | From 61,95 | |
| This product | View product | View product | View product |