Nederland
Belgium (English)
Deutschland
Finland
Ireland
Luxembourg
Portugal
Poland
Österreich
France
España
Italia
Sverige
DanmarkRotor Rex 2.2 Crankset
Rotor Rex 2.2 Crankset
Would you have liked to see more product images?
This product is sold out, and will not come back in stock.
Ask a question about this product
Try in store
A large part of our assortment is in stock in our stores and ready to try, fit, and experience without an appointment.
Our full assortment is available online. You can order and pay for products online and have them delivered for free to one of our Superstores. This way, you can try everything out. Not satisfied? You can return it to the store free of charge and receive a refund.
Did this help you?
Specifications
Specifications
| Brand | Rotor | |
| Type | Double | |
| Crankset axle fit | UBB30 | |
| Crank Length | 175 mm | |
| Q-factor | 163 mm | |
| Suitable for Boost | No | |
| Colour | Black |
The Rotor REX 2.2 double crank arms are the cheaper version of the REX 1.2. With these crank arms are the technical developments from Rotor available for the mountain bike for a affordable price. The difference lies in the finish and its weight, in addition the red accents you found on the 1.2 version are also implemented in this grey version.
An important technology used in the Rotor cranks is the so-called ''Trinity Drilled System''. With this system the cranks are 3 times drilled out on the in inside, resulting in a very light and yet rigid construction. This crank arm withstands the rotation and bend forces better than a standard crank.
This crank of Rotor uses a UBB30 axle. This means that this crank can be fitted in almost every frame. The axle has the right length for a frame with BSA/ITA bearings.
Please note: This only the crank, thus excluding chainrings!
An important technology used in the Rotor cranks is the so-called ''Trinity Drilled System''. With this system the cranks are 3 times drilled out on the in inside, resulting in a very light and yet rigid construction. This crank arm withstands the rotation and bend forces better than a standard crank.
This crank of Rotor uses a UBB30 axle. This means that this crank can be fitted in almost every frame. The axle has the right length for a frame with BSA/ITA bearings.
Please note: This only the crank, thus excluding chainrings!
• Bladbouten