Reviews over the
Schwalbe Presta - SCV Conversion Kit

Schwalbe Presta - SCV Conversion Kit
4.5 / 5
Average from 13 reviews
5
7 reviews
4
6 reviews
3
0 reviews
2
0 reviews
1
0 reviews

4 / 5

Pima, just don’t forget the adapter

- Cees, 22 June, 2026

That’s what I expected

Pros & Cons

Easy
No more hassle
Quick to install
None.
The full cost for two bikes all at once.
Automatic translation

4 / 5

Never thought tyre pumping would be even easier, really good buy!

- Marcus, 7 June, 2026

It's easy to change your valves, a few minutes' work at most. I find it much nicer to work with, tyres pump up quickly, don't lose air and the Click system works really efficiently. There are already countless pumps and parts available that work with the Clickvalve. Great product.

Pros & Cons

Cheap to buy
Does not lose air
Is much faster
Automatic translation

4 / 5

Once you have replaced the valve, it really is much easier

- Ivan, 26 May, 2026

I have only been using these valves for a short while but anyone who has to inflate tyres regularly has experienced it with a presta valve: either the pump head flies off when inflating or you lose a lot of air when disconnecting. So that is not the case with these valves. Replacing the valve is something you do have to go through but after that it really is much easier.

Pros & Cons

Much easier than standard presta valve
You need a separate pump head and valve
Automatic translation

4 / 5

Satisfies fine in the end

- Huib, 19 March, 2026

Valves are fine, small pump head a bit less convenient. Works well on electric pump, though. Better convert your high-pressure pump and (unfortunately) buy new SCV mini pump

Pros & Cons

Pumping very easy
Valves easy to replace
Pumphead on mini pumps not nice to use
Automatic translation

4 / 5

Worth every penny

- Anteun, 19 March, 2026

Once they are in place, pumping up your tyre is a piece of cake. But screwing them into the valve was a bit of a hassle because the tool quickly stopped working so you had to use pliers, which unfortunately quickly damaged the outside of the valve. Otherwise, it works excellently

Pros & Cons

Inflates faster
Difficult to assemble
Automatic translation

4 / 5

The future

- Judith, 20 January, 2026

Think this will be the future though. Just doesn't fit all valves with presta. I had tpu tyres with plastic valves. So you twist these to pieces during installation. Fortunately, in April there will be a tyre with this click system made with TPU

Pros & Cons

Good tight connection between valve and pump
Cannot fit all valves. 2 tpu tyres killed
Automatic translation