Reviews over the
Lezyne Tubeless Pro Plugs
5 / 5
Best permanent plug for tubeless tyres. Slightly expensive.
Tyre must be removed from rim to adhere properly. Remove latex residue and sand firmly to ensure good adhesion with glue. Allow at least 10 minutes for glue to cure. Only then glue. After fitting the tyres, apply milk, inflate and only then cut the plug. Does not affect handling. Plug will last the lifetime of the tyre.
Pros & Cons
5 / 5
top product, as we are used to from lezyne
I was looking for and durable solution to repair a fairly new tyre with a larger hole. The ordinary plugs went back out due to the pressure in the tyre. Because this one is glued on the inside, this seems to be the better solution so far. Cumbersome though, and thus not for on the road. (Remove tyre, remove sealant, fit plug, reinstall tubeless).
Pros & Cons
3 / 5
Wouldn't put that in a new tyre
I put this in a tyre and it works, but it deforms it.
5 / 5
Top product
Recommended and easy to apply in band
Pros & Cons
5 / 5
Good repair solution
A very fine product
Pros & Cons
5 / 5
Top product!
Had been looking for a good adhesive set for my tubeless tyres for a long time, ordered this one and it works really well!
Pros & Cons
3 / 5
Solid but half not usable on road bike
Decent quality, pity choice formats are not just for road bike
Pros & Cons
4 / 5
Good repair for tubeless but very expensive
I had a snakebite at the level of my rim and the Dynaplug did not get it closed . Fortunately now with these stickers it does. Good stuff, but very expensive per sticker, so one star less. But then again, a new tyre is much more expensive, so I do use them.