Nederland
Belgium (English)
Deutschland
Finland
Ireland
Luxembourg
Portugal
Poland
Österreich
France
España
Italia
Sverige
Danmark
- Ordered before 22:00, delivered tomorrow
- Free tracked shipping over € 49,-
Specifications
Specifications
| Brand | Marwi | |
| Quality | Good |
The headset wrench applies to the following sizes: 30 / 32 and 36 / 40 millimetres.
Ask a question about this product
Try in store
Available directly in-store, or order online.
Reviews
Reviews
Most recent reviews
3 / 5
Cheap but bad tolerances
The tool is nice to have, covers most threaded 1" headsets. It looks like it's made from durable material but it measures loose, and it also feels like a loose fit during use (leaving bite marks on an alloy hearset specially) It measures as follows: 36.2mm/40.4mm and 30.1mm/32.5mm
Pros & Cons
4 / 5
See score
Meets
Pros & Cons
2 / 5
Cheap is expensive
I bought 2 pieces for loosening and tightening steering head nuts. I first used the 32mm jaw opening and there is so much play on this (the opening is too big) that I damaged the headstock nut. I then measured both spanners and they are on average about 0.5mm too big. So the factory tolerance is not anything to write home about. I returned the set.
Pros & Cons
5 / 5
headset bearing adjustment went perfectly
everything as agreed and fast delivery
4 / 5
Finish a little rough but compatible with the job.
Great for the price, job got done with it.
Pros & Cons
3
Cheap but bad tolerances
The tool is nice to have, covers most threaded 1" headsets. It looks like it's made from durable material but it measures loose, and it also feels like a loose fit during use (leaving bite marks on an alloy hearset specially) It measures as follows: 36.2mm/40.4mm and 30.1mm/32.5mm
-
Cheap
-
Universal
-
External parts easily stripped
-
Loose fit
2
Cheap is expensive
I bought 2 pieces for loosening and tightening steering head nuts. I first used the 32mm jaw opening and there is so much play on this (the opening is too big) that I damaged the headstock nut. I then measured both spanners and they are on average about 0.5mm too big. So the factory tolerance is not anything to write home about. I returned the set.
-
Cheap
-
Feels thick and sturdy enough for the purpose
-
Chance of damaging the headset nut
-
Excessive tolerances on jaw opening
Frequently bought together
Frequently bought together
Recommended by the product specialist
Recommended by the product specialist
