Garmin Rally RS SPD-SL Power Meter Pedals

The Garmin Rally RS is the ultimate powermeter pedal. This extremely advanced, robust and accurate powermeter gives your training that little bit extra. The Rally RS is suitable for Shimano SPD-SL pedals and can be used on your road bike or your bicycle trainer. Because the measurement is in the axis of the pedal, you can easily transfer the Rally RS pedals to another bike: so there is no more excuse to cycle without a powermeter.

Accurate measurement and advanced data
You expect a powermeter to have extremely accurate readings and the Garmin Rally RS is certainly no exception. With an accuracy of around 99% (and a deviation of around 1%), you'll get a very reliable reading. Your cadence is also measured as standard.

Difference between single- and double sided measurement
With the single-sided measurement, your power is measured only in your left pedal. This value is doubled, which is an indication of your total power. With the double-sided pedals, your power is measured in both your left and right pedal, making the power values more accurate and giving you extra data. For example, your power output while sitting or standing is mapped out and compared with each other. And by means of the power phase, you can see where you deliver the most power on your pedals. In addition, the Platform Center Offset (PCO) measurement shows how you distribute your power across your pedals. Finally, the left-right balance gives you an insight into the distribution of power between your two legs. In short, the double-sided versions provide advanced cycling dynamics to show you how you produce your power and where you could still improve.

Full integration with the Garmin Eco System
A Garmin is not a Garmin if it is not fully integrated with the Garmin Ecosystem. For easy data analysis, software or setting updates, the Rally RS is therefore easily connected to a Garmin sports watch, Edge bike computers, Garmin heart sensors and the Garmin Connect app. This seamless integration also makes it possible to receive sports advice, training sessions, tips and workouts based on data from the Rally RS. Subsequently, you can also directly post all your data on a platform of your choice, such as Strava. Of course, the Rally RS also works with indoor training apps like Zwift, and thanks to Bluetooth and ANT+ you can also connect to sports devices from other brands. In short, the Garmin Rally RS completes your efficiency in sports.

Battery life
The Garmin Rally RS has no internal battery, but uses button cell batteries. The downside is that you'll need to change them every now and then. Luckily, the battery lasts up to 120 hours, which is a lot longer than most internal batteries in powermeter pedals. Also, the battery cover and threads are made of metal, not plastic, which greatly improves the Rally's durability and robustness compared to the Vector.

• Measurement deviation: 1%
• Battery life: 120 uur
• Battery type: LR44/SR44 (4 times) of CR1/3N (2 times)
• Q-factor: 53 mm (55 mm with 2 mm spacer)
• Stack height: 12.2 mm
• Maximum rider weight: 105 kilogram

Weight (both pedals together):
• Single sided: 328 gram
• Double sided: 320 gram

- Compatible with all types of sports bikes: road, MTB, gravel and cyclocross.

• Garmin Rally RS100 (single sided measurement) or RS200 (double sided measurement) pedals
• Shimano SPD-SL cleats
• Documentation

The Garmin Rally RS pedals are easy to mount and dismount. You do not have to do anything differently than when you're replacing or fitting standard MTB pedals.

• Dismount your pedals every 6 months to clean them, and of course grease them again when you mount them back on your bike.