- Delivery in 5-6 working days
- Tracked & hassle-free delivery
- Trustpilot rating 4.7/5
- Easy returns
Ask a question about this product
Email Customer ServicePros & Cons
Pros & Cons
- With a liner you create a completely closed cable system, where sand, mud and dirt do not easily get in.
- This liner is lubricated with PTFE, which gives you unparalleled smoothness when changing gears and braking.
- Changing gears is greatly improved when cycling with external cables, because difficult bends in the cable run are taken better.
- Thanks to a liner, replacing internally routed cables becomes much easier.
- It can be a chore to install the liner on a bicycle with internal cable routing.
Specifications
Specifications
Brand
|
Jagwire |
Suitable for
|
Campagnolo / Shimano / Sram / Jagwire |
Colour
|
White |
Description
Description
In addition, you can use this liner to guide the cable along the frame if you have external cable routing. The liner enables you to guide the cable along sharp turns, like when the cable runs below the frame tubes.
Delivery includes
Brake hose:• Size: 1.9 x 2.4 mm
• Length: 1600 mm
Shifting cable:
• Maten: 1.4 x 1.9 mm
• Length: 2300 mm
Reviews
Reviews
Most recent reviews
5 / 5
If you do your own maintenance on your bike, this is handy piece of kit.
Ordered two sets; for brake and gear cables. Had never replaced internal cabling before, but with these liners the job was easily done. Nice addition to toolbox.
Pros & Cons
5 / 5
Indispensable product!
My derailleur cable was broken and needed to be replaced and I have a carbon frame where the cables run through with this Jagwire it was fixed in no time! Remove/cut the cable from your handlebar lever and push this Jagwire over it and all the way through your frame (cable is 2 meters so that should work) then pull out the old cable and push the new cable through the Jagwire and you're done, under no circumstances pull the old cable out of your frame otherwise you can't install the Jagwire and you may spend hours fiddling to pull the cable through the frame (with such a magnet set)! Then you can pull the Jagwire out or leave it in, the cable is very smooth so I left it in the frame.
Pros & Cons
5 / 5
Highly recommended for bikes with internal routing.
This is the only thing you need to route the new internal cables when the old ones are still inside the frame. You can reuse it as many times as you want or leave the liner inside to cover the cable in places there are outside the frame e.g. under the bottom bracket.
Pros & Cons
5 / 5
Excellent product.
Super product, very smooth gear changes. Extends cable life considerably.
Pros & Cons
5 / 5
Satisfactory, but is pricey for what it is.
Bought to route my internal cables through my frame. Works fine, and has sufficient length; no need to worry about that. However, it is expensive for a simple piece of plastic tubing.
Pros & Cons
5
If you do your own maintenance on your bike, this is handy piece of kit.
Ordered two sets; for brake and gear cables. Had never replaced internal cabling before, but with these liners the job was easily done. Nice addition to toolbox.
-
ample length
-
good addition to tool set
-
handy in use
5
Indispensable product!
My derailleur cable was broken and needed to be replaced and I have a carbon frame where the cables run through with this Jagwire it was fixed in no time! Remove/cut the cable from your handlebar lever and push this Jagwire over it and all the way through your frame (cable is 2 meters so that should work) then pull out the old cable and push the new cable through the Jagwire and you're done, under no circumstances pull the old cable out of your frame otherwise you can't install the Jagwire and you may spend hours fiddling to pull the cable through the frame (with such a magnet set)! Then you can pull the Jagwire out or leave it in, the cable is very smooth so I left it in the frame.
-
Easiest way to replace a cable
-
Fastest solution 30 min max
-
Liner fits neatly around the cable
5
Highly recommended for bikes with internal routing.
This is the only thing you need to route the new internal cables when the old ones are still inside the frame. You can reuse it as many times as you want or leave the liner inside to cover the cable in places there are outside the frame e.g. under the bottom bracket.
-
Durability
-
Easiness of use
-
Superb for routing internal cables
-
Expensive
5
Satisfactory, but is pricey for what it is.
Bought to route my internal cables through my frame. Works fine, and has sufficient length; no need to worry about that. However, it is expensive for a simple piece of plastic tubing.
-
Does what it is made for
-
Sufficient length
-
A lot of money for a plastic hose
Frequently bought together
Frequently bought together
Related products
Related products
Jagwire Slick-Lube Liner | Shimano Shifter cable end cap Y62098030 100x | BBB Cycling Cablecap Kit BCB-99 | Jagwire Mini Inline Adjusters | |
7 reviews | 13 reviews | 6 reviews | 1 review | |
Suitable for | Campagnolo / Shimano / Sram / Jagwire | Shimano | Campagnolo / Shimano / Sram | |
Cable Type | Derailleur cable / Brake cable | Derailleur cable | Derailleur cable / Brake cable | |
Colour | White | Grey | Black / Green / Blue / Red | Black |
10.30 | 8.60 | From 11.10 | 9.40 | |
This product | View product | View product | View product |