Wheels Manufacturing Inc. BB30 Enduro Bearings Abec 3

Wheels Manufacturing Inc. BB30 Enduro Bearings Abec 3
This product is sold out, and will not come back in stock.

Ask a question about this product

Email Customer Service
mantel-customer-service

Description

Description

Nothing is more annoying than a creaking bike. The culprit is often the bottom bracket cups and bearings. With the Wheels Manufacturing Inc. BB30 Enduro Bearings Abec 3 bottom bracket you will never have a creaking bike. They are flexible, last longer, and the bearings can be replaced quickly.

Wheels Manufacturing Inc. works together with Enduro. They have years of experience with producing bearings for industrial application, which is put to good use in the BB30 Enduro Bearings Abec 3. This in combination with two machine milled cups result in bearings of outstanding quality. Say goodbye to your creaking bicycle!

Technology

• Bearings: Enduro ABEC-3
• Bottom Bracket: BB30, Specialised Alloy OSBB
• Bottom Bracket width: 68mm - 73mm
• Bottom Bracket Shell I.D.: 42mm
• Crank type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI
• Crank spindle diameter: 24mm
• Weight: 153 gr
Show more Show less

Reviews

Reviews


5 / 5

Nice stuff.

- Stefanofiets 2 April 2022

I have a Cannondale where BB30 was fitted with sram crankset in front and Shimano system in the rear. Unfortunately no more loose blades available from sram what may be combined with Shimano chain. So I decided to go all Shimano configuration thanks to these bearings. The bearings can also be replaced separately later. Nice solution that works well. Tip: measure the chain line first so you don't deviate too much later. (Is easier than calculating all over again)

Pros & Cons

Bearings can also be replaced separately
Conversion from bb30 to Shimano possible
Easy to mount
Automatic translation

5 / 5

Was on the pricey side but still worth it.

- Jos 20 May 2021

Had first ordered another but was for hollowtech II. Put on Marketplace on Mantel's recommendation. Sold in no time. Assembly very simple and quick. Mounted new crankset within ten minutes. Rides like a charm. No more squeaking and creaking

Pros & Cons

Fast delivery
Friendly service
No
Automatic translation

5

Stefanofiets, 2 April 2022

Nice stuff.

I have a Cannondale where BB30 was fitted with sram crankset in front and Shimano system in the rear. Unfortunately no more loose blades available from sram what may be combined with Shimano chain. So I decided to go all Shimano configuration thanks to these bearings. The bearings can also be replaced separately later. Nice solution that works well. Tip: measure the chain line first so you don't deviate too much later. (Is easier than calculating all over again)

  • Bearings can also be replaced separately
  • Conversion from bb30 to Shimano possible
  • Easy to mount
Automatic translation

5

Jos, 20 May 2021

Was on the pricey side but still worth it.

Had first ordered another but was for hollowtech II. Put on Marketplace on Mantel's recommendation. Sold in no time. Assembly very simple and quick. Mounted new crankset within ten minutes. Rides like a charm. No more squeaking and creaking

  • Fast delivery
  • Friendly service
  • No
Automatic translation