- Delivery in 3-4 working days
- Free tracked delivery to Portugal
- Trustpilot rating 4.7/5
- Easy returns
Ask a question about this product
Email Customer Service
Pros & Cons
Pros & Cons
- The Elitewheels Pro33 carbon mountain bike wheels are designed for ideal cross-country performance!
- The 28 Sapim CX ray spokes in 3X pattern beautifully divide tension over the wheels.
- The rims measure 27 mm in internal width and 33 mm in external width, but only weigh an extremely low 1350 grams!
- The wheels feature well-sealed Elitewheels Pro hubs and TPI bearings for smooth spinning, even long term.
- Re-tensioning isn't necessary with these wheels, because this is included in the manufacturing process.
- The Pro36 MTB wheelset is a better choice if you're using 2.4 inch tyres.
Specifications
Specifications
Brand
|
Elitewheels |
29 inch | |
Wheelset | |
Cross-Country / All mountain | |
2.10 inch - 2.35 inch / 2.35 inch - 2.50 inch | |
110 x 15 mm axle (Boost) | |
148 x 12 mm axle (Boost) | |
Rim Material
|
Carbon |
Rim Width (internal)
|
27 mm |
The well-sealed Elitewheels Pro hubs and TPI bearings are produced with the utmost precision, so they run smoothly even long term. The 3X spoke pattern evenly divides tension over the wheel, which features 28 strong and dependable Sapim CX Ray spokes. Despite the 33 mm rim width and the number of spokes, this wheelset is very light at an impressive 1350 grams!
Extremely lightweight rims
The rims make use of both Toray T700 and T800 carbon fibres. These two fibre types are used in various places in the wheel to improve the ratio between the strength and weight of the wheel, decreasing radial and lateral forces and increasing power transfer. Plus, the rims were especially designed to make sealing tubeless tyres with a floor pump easier.
Aluminium Pro hubs
The wheels come with Elitewheels Pro hubs, which feature TPI bearings. Both the rear and front hubs are made out of a 7075 aluminium alloy, and the lightweight body features a 36 teeth ratchet system.
Quality spokes!
The Pro33 wheels feature Sapim CX-Ray spokes. The wheel is sideloaded after initial truing. This process is repeated until the wheel has been sideloaded as many as 16 times. This essential quality control process means the wheels are guaranteed to deviate no more than 0.2 mm from the indicated values. The 3,2 mm spoke offset minimizes the difference in spoke tension between the left and right. This makes the wheel stronger and increases lateral rigidity, giving you more control!
• 2x Tubeless rim tape (preinstalled)
• 2x Tubeless valves (preinstalled)
Reviews
Reviews
4 / 5
Top set at a decent price
Fine wheelset for XC/Marathon riding. Weighed and measured the wheelset: Weight 1396gr incl tape and valves, so pretty much matches the stated weight. Rim dimensions are according to spec. Spoke tension could be better, but is still within 15% spec. Height and lateral travel are within the 0.2mm spec of elitewheels. Bearings run nicely smoothly. Ridden a few hundred kilometres with it now and am very satisfied so far. It is not uncommon to hear the spokes on these wheels, but in my case they are completely silent so far. The future will show how reliable they are, but so far I have had no problems with them. Price-quality ratio is very good! Ok there are better wheel sets but then you are also in a different price range. By the way, Elite-wheels also sells a 60T ratchet upgrade.
Pros & Cons
4 / 5
Wheels ride just fine, gives bike more life
Ridden a few rides with it. Vittoria tyre fitted well. The spokes did make some noise on first climbs but not after that. Wheels weigh 1391g instead of 1350g.
Pros & Cons
4
Top set at a decent price
Fine wheelset for XC/Marathon riding. Weighed and measured the wheelset: Weight 1396gr incl tape and valves, so pretty much matches the stated weight. Rim dimensions are according to spec. Spoke tension could be better, but is still within 15% spec. Height and lateral travel are within the 0.2mm spec of elitewheels. Bearings run nicely smoothly. Ridden a few hundred kilometres with it now and am very satisfied so far. It is not uncommon to hear the spokes on these wheels, but in my case they are completely silent so far. The future will show how reliable they are, but so far I have had no problems with them. Price-quality ratio is very good! Ok there are better wheel sets but then you are also in a different price range. By the way, Elite-wheels also sells a 60T ratchet upgrade.
-
Good price
-
Lightweight
-
Look nice
-
None so far.
4
Wheels ride just fine, gives bike more life
Ridden a few rides with it. Vittoria tyre fitted well. The spokes did make some noise on first climbs but not after that. Wheels weigh 1391g instead of 1350g.
-
tubeless rim tape
-
tubeless valve
-
weight
-
heavier than advertised
Recommended by the product specialist
Recommended by the product specialist
Related products
Related products
|
|
|
|
|
Elitewheels Pro33 | DT Swiss XM1700 Spline 30 | Elitewheels Pro36 | Mavic Crossride FTS-X | |
2 reviews | 3 reviews | 0 reviews | 27 reviews | |
Wheel Size | 29 inch | 29 inch | 29 inch | 26 inch (650c) / 27.5 inch (650b) / 29 inch |
Type of wheel | Wheelset | Wheelset / Rear Wheel | Wheelset | Wheelset / Front Wheel / Rear Wheel |
Application Range | Cross-Country / All mountain | Cross-Country / Trail | Cross-Country / All mountain | Cross-Country |
Tyre width recommended by Mantel | 2.10 inch - 2.35 inch / 2.35 inch - 2.50 inch | 2.35 inch - 2.50 inch | 2.10 inch - 2.35 inch | 1.85 inch - 2.10 inch |
Axle System Front Hub | 110 x 15 mm axle (Boost) | 110 x 15 mm axle (Boost) | 110 x 15 mm axle (Boost) | 100 x 5 mm QR / 100 x 15 mm axle |
Axle System Rear Hub | 148 x 12 mm axle (Boost) | 148 x 12 mm axle (Boost) | 148 x 12 mm axle (Boost) | 135 x 5 mm QR |
From 690,22 | From 253,12 | 751,22 | From 100,59 | |
This product | View product | View product | View product |