Vejl. udsalgspris 408
272
136 rabat
På lager
(Kun 4)
- Levering 2-3 arbejdsdage
- Gratis levering med Track & Trace over 399 kr
- Trustpilot bedømmelse 4.7/5
- Nem returnering
Stil et spørgsmål om dette produkt
E-mail vores kundeserviceSpecifikationer
Specifikationer
Mærke
|
SRAM |
11-speed | |
Mekanisk | |
Montering
|
Svejsning |
Vægt
|
175 gram |
Farve
|
Sort |
Type
|
Dobbelt / Kompakt |
Hvilket gruppesæt har du?
|
SRAM Rival |
Beskrivelse
Beskrivelse
The Rival 22 Yaw front derailleur represents a serious improvement in shifting performances. The Yaw front derailleur cage moves in the same line as its chain, this improves the precision and speed when shifting up and prevents trimming your front derailleur, because there is no chain rub.
The Chainspotter ensures your precious frame is spared from scratches when your chain accidentally falls next to its chainring. This handy stick fills up the space behind your inner chainring, so your chain doesn't have any space to get stuck between your frame and chainring.
• Integrated chains spotter protects your frame if your chain would run off its chain ring.
• Weight: 89g incl. Chain Spotter
Before starting to (dis)assemble, shift the front derailleur to the smallest blade. That way the tension on the gear cable is smaller, making it easier to release the derailleur.
Disconnect the gear cable
Use an Allen wrench to disconnect the shift cable from the derailleur. An Allen key can be found here.
Disassemble the bike chain
Before you can remove the derailleur, you must remove the chain. You will need a chain breaker or missing link pliers for this. The chain breaker can be found here and the missing link pliers can be found here.
Position the front derailleur
When installing, make sure to leave a gap of about 2 mm between the outer edge of the derailleur and the largest chainring.
Adjust your derailleur
It is important to properly adjust the derailleur after mounting. This is a meticulous job, which you can read all about here.
It is good to lubricate the pivot points and the cable with some oil from time to time. This keeps the front derailleur shifting smoothly. Good oils that you can use not only for this, but also for lubricating the rest of the drivetrain, can be found here.
Vis mere
Vis mindre
The Chainspotter ensures your precious frame is spared from scratches when your chain accidentally falls next to its chainring. This handy stick fills up the space behind your inner chainring, so your chain doesn't have any space to get stuck between your frame and chainring.
Teknologier
• The Yaw cage moves in line with the chainline. This improves gear changing speed and precision. Moreover, the chain doesn't rub against the cage.• Integrated chains spotter protects your frame if your chain would run off its chain ring.
• Weight: 89g incl. Chain Spotter
Montering
Reduce the tension on the gear cableBefore starting to (dis)assemble, shift the front derailleur to the smallest blade. That way the tension on the gear cable is smaller, making it easier to release the derailleur.
Disconnect the gear cable
Use an Allen wrench to disconnect the shift cable from the derailleur. An Allen key can be found here.
Disassemble the bike chain
Before you can remove the derailleur, you must remove the chain. You will need a chain breaker or missing link pliers for this. The chain breaker can be found here and the missing link pliers can be found here.
Position the front derailleur
When installing, make sure to leave a gap of about 2 mm between the outer edge of the derailleur and the largest chainring.
Adjust your derailleur
It is important to properly adjust the derailleur after mounting. This is a meticulous job, which you can read all about here.
Tips til brug
Grease the pivot points for proper operationIt is good to lubricate the pivot points and the cable with some oil from time to time. This keeps the front derailleur shifting smoothly. Good oils that you can use not only for this, but also for lubricating the rest of the drivetrain, can be found here.
Anmeldelser
Anmeldelser
5 / 5
Passer perfekt til en SRAM 22-gruppe
- M E 17 marts 2023
Rival forskifter er identisk med force, men meget billigere.
Fordele og ulemper
Kædefanger med komplette mål
Let at installere
Skarp pris
Justeringsknapperne går hurtigt i stykker
Automatisk oversat
5 / 5
Lige tilpas.
- Robert 1 marts 2023
Lever op til forventningerne - let at sætte op
Fordele og ulemper
Standard med "kædefanger"
Automatisk oversat
4 / 5
Ok, ikke fantastisk
- David 30 marts 2021
Mantel service fremragende, men bagskifteren er ikke mere end ok. Det kan være stellet (Boardman Team Carbon 2009), men kæden gnider i toppen af kassetten i den store ring og i bunden af kassetten i den inderste ring.
Fordele og ulemper
Fungerer ok med Force 22-skiftere
Udnytter ikke alle 22 gear
Automatisk oversat
4
David, 30 marts 2021
Ok, ikke fantastisk
Mantel service fremragende, men bagskifteren er ikke mere end ok. Det kan være stellet (Boardman Team Carbon 2009), men kæden gnider i toppen af kassetten i den store ring og i bunden af kassetten i den inderste ring.
-
Fungerer ok med Force 22-skiftere
-
Udnytter ikke alle 22 gear
Automatisk oversat