SRAM PG-1070 Kassette

To be able to benefit fully from the power and the possibilities of Sram groupsets, you need a cassette that is up to the task. In the design of the new Sram Force PG-1070 cassette, in which the 3 largest sprockets are on a spider, Sram has left out certain teeth of the smaller sprockets. This created a cassette that can be shifted efficiently and directly in all situations.

• Material lockring: forged 7000 aluminium alloy
• Material sprockets: thermally toughened steel
• Construction large to small: 3+1+1+1+1+1+1+1
• Number of separate components: 8
• Carrier: aluminium
• Usable for both race and mountainbike
• Teeth and weight:
• 11/23: 11-12-13-14-15-16-17-19-21-23 – 210 grams*
• 11/26: 11-12-13-14-15-17-19-21-23-26 – 230 grams*
• 11/28: 11-12-13-14-15-17-19-22-25-28 – 240 grams*
• 11/32: 11-12-13-15-17-19-22-25-28-32 – 292 grams*
• 12/25: 12-13-14-15-16-17-19-21-23-25 – 236 grams*
• 12/27: 12-13-14-15-16-17-19-21-24-27 – 243 grams*
• 12/28: 12-13-14-15-16-17-19-22-25-28 – 251 grams*
• 12/32: 12-13-14-15-17-19-22-25-28-32 – 289 grams*
• 12/36: 12-13-15-17-19-22-25-28-32-36 – 358 grams*
* Weighed by Mantel.

Special tools for mounting
To mount this cassette you need specific tools. These can be found here. For a more detailed explanation and instructions on how to use these tools please refer to our blog on replacing a cassette.

Don't forget the assembly grease!
The lockring of your cassette can be well tightened, in some cases up to 40 Nm. To make removing the lockring in the future easier, we recommend lubricating it with a bit of assembly grease. You can find our selection of assembly greases here.

How often should I wash my bike? Regular washing will keep your bike in good nick. It ensures that the parts on your bike last longer so that you can enjoy cycling happiness for longer. How often you should wash your bike is largely dependent on what sort of weather conditions you ride in. Are you always out there, come rain or shine? Or are you strictly a fair-weather cyclist? It all has an influence on the degree of wear on bike parts, and some of us have to wash our bikes more regularly than others. Refer to the plan below as a general guideline:

October to March:
• Wash every 200 km
• Rinse after every ride
• Dry and lube the chain after every ride
• Let the bike dry at room temperature

April to September:
• Wash every 300 km
• Rinse after a ride in the rain
• Dry and lube the chain after rinsing or washing
• Let the bike dry at room temperature