Park Tool PP-1.2 Hydraulic Brake Piston Press
Park Tool PP-1.2 Hydraulic Brake Piston Press
3 Anmeldelser
Vejl. udsalgspris 246
187
59 rabat
- Trustpilot bedømmelse 4.7/5
- Nem returnering
Stil et spørgsmål om dette produkt
E-mail vores kundeserviceFordele og ulemper
Fordele og ulemper
- Replacing your disc brake pads becomes super easy with this tool.
- Ideal for hydraulic disc brake calipers from SRAM, Shimano and others on mountain bikes and road bikes.
- Before using the PP-1.2, the caliper and piston need to be thoroughly cleaned.
- Not suitable for disc brake systems with ceramic pistons.
Specifikationer
Specifikationer
Mærke
|
Park Tool |
Bedst |
Beskrivelse
Beskrivelse
The Park Tool PP-1.2 Brake pad spreader is the ideal tool for replacing and correcting your disc brake pads.
Piston spreaders
You use this tool to push the pistons of your hydraulic disc brakes back into the caliper. The force you apply must be evenly distributed over the whole surface of the piston. The piston must slide straight back into the calliper. Using a screwdriver or other tool for this job is very risky and can permanently damage the system.
Inadvertently squeezing the brake lever
Worn brake pads are easy to replace yourself and this tool will come in handy! The Park Tool disc brake press can also be used if you accidentally squeeze the brake lever while the wheel is off the bike. The piston will come out of the caliper in this case. The PP-1.2 enlarges the space between the brake blocks and ensures that the brake disc fits well between them again.
Vis mere
Vis mindre
Piston spreaders
You use this tool to push the pistons of your hydraulic disc brakes back into the caliper. The force you apply must be evenly distributed over the whole surface of the piston. The piston must slide straight back into the calliper. Using a screwdriver or other tool for this job is very risky and can permanently damage the system.
Inadvertently squeezing the brake lever
Worn brake pads are easy to replace yourself and this tool will come in handy! The Park Tool disc brake press can also be used if you accidentally squeeze the brake lever while the wheel is off the bike. The piston will come out of the caliper in this case. The PP-1.2 enlarges the space between the brake blocks and ensures that the brake disc fits well between them again.
Anmeldelser
Anmeldelser
4 / 5
Jeg er tilfreds
- Johan Willem 21 oktober 2023
Perfekt til at nulstille mine stempler
Fordele og ulemper
Gør, hvad den skal gøre
Solid
Solid kvalitet
Automatisk oversat
5 / 5
Gør, hvad den skal, og gør det godt
- Dick 22 september 2023
Ligger let i hånden og er dejlig robust. Som med det meste Parktool-udstyr er det solidt og gennemtænkt, og det er dette værktøj også.
Fordele og ulemper
Behageligt håndtag
Gør det godt
Automatisk oversat
4 / 5
Meget tilfreds
- Guus 1 juni 2023
Fungerer godt
Fordele og ulemper
Fungerer rigtig godt
Når jeg sætter nye klodser i, kan jeg skubbe dem sammen
Skubbe dem fra hinanden
Automatisk oversat
Ofte købt sammen
Ofte købt sammen
Relaterede produkter
Relaterede produkter
Park Tool PP-1.2 Hydraulic Brake Piston Press | BBB Cycling Pistonfix BTL-115 | Pro Piston Lever Discbrake | |
3 Anmeldelser | 11 Anmeldelser | 3 Anmeldelser | |
Kvalitet | Bedst | Bedre | Bedre |
187 | 148 | Fra 156 | |
Dette produkt | Se produkt | Se produkt |