Park Tool PP-1.2 Hydraulic Brake Piston Press
Park Tool PP-1.2 Hydraulic Brake Piston Press
3 opiniones
PVPR 31,99
23,95
8,04 de descuento
- Valoración de Trustpilot 4.7/5
- Devoluciones fáciles
Haz una pregunta sobre este producto.
Envía un correo al servicio al clientePros y Contras
Pros y Contras
- Replacing your disc brake pads becomes super easy with this tool.
- Ideal for hydraulic disc brake calipers from SRAM, Shimano and others on mountain bikes and road bikes.
- Before using the PP-1.2, the caliper and piston need to be thoroughly cleaned.
- Not suitable for disc brake systems with ceramic pistons.
Especificaciones
Especificaciones
Marca
|
Park Tool |
Excelente |
Descripción
Descripción
The Park Tool PP-1.2 Brake pad spreader is the ideal tool for replacing and correcting your disc brake pads.
Piston spreaders
You use this tool to push the pistons of your hydraulic disc brakes back into the caliper. The force you apply must be evenly distributed over the whole surface of the piston. The piston must slide straight back into the calliper. Using a screwdriver or other tool for this job is very risky and can permanently damage the system.
Inadvertently squeezing the brake lever
Worn brake pads are easy to replace yourself and this tool will come in handy! The Park Tool disc brake press can also be used if you accidentally squeeze the brake lever while the wheel is off the bike. The piston will come out of the caliper in this case. The PP-1.2 enlarges the space between the brake blocks and ensures that the brake disc fits well between them again.
Mostrar más
Mostrar menos
Piston spreaders
You use this tool to push the pistons of your hydraulic disc brakes back into the caliper. The force you apply must be evenly distributed over the whole surface of the piston. The piston must slide straight back into the calliper. Using a screwdriver or other tool for this job is very risky and can permanently damage the system.
Inadvertently squeezing the brake lever
Worn brake pads are easy to replace yourself and this tool will come in handy! The Park Tool disc brake press can also be used if you accidentally squeeze the brake lever while the wheel is off the bike. The piston will come out of the caliper in this case. The PP-1.2 enlarges the space between the brake blocks and ensures that the brake disc fits well between them again.
Opiniones
Opiniones
4 / 5
Estoy contenta
- Johan Willem 21 octubre 2023
Perfecto para reajustar mis pistones
Pros y Contras
Calidad sólida
Hace lo que tiene que hacer
Sólido
Traducido automáticamente
5 / 5
Hace lo que tiene que hacer y lo hace bien
- Dick 22 septiembre 2023
Ligera en la mano y es bonita y robusta. Como la mayoría de los equipos Parktool, son sólidos y están bien pensados, así es esta herramienta.
Pros y Contras
Lo hace bien
Mango agradable
Traducido automáticamente
4 / 5
Muy satisfecho
- Guus 1 junio 2023
Funciona bien
Pros y Contras
Cuando pongo bloques nuevos, puedo empujarlos
Funciona muy bien
Separarlos
Traducido automáticamente
A menudo se compran juntos
A menudo se compran juntos
Producto relacionado
Producto relacionado
Park Tool PP-1.2 Hydraulic Brake Piston Press | BBB Cycling Pistonfix BTL-115 | |
3 opiniones | 11 opiniones | |
Calidad | Excelente | Óptima |
23,95 | 18,95 | |
Producto actual | Ver producto |