Park Tool PP-1.2 Hydraulisk skivbroms spridare
Park Tool PP-1.2 Hydraulisk skivbroms spridare
3 recensioner
För- & Nackdelar
För- & Nackdelar
- Replacing your disc brake pads becomes super easy with this tool.
- Ideal for hydraulic disc brake calipers from SRAM, Shimano and others on mountain bikes and road bikes.
- Before using the PP-1.2, the caliper and piston need to be thoroughly cleaned.
- Not suitable for disc brake systems with ceramic pistons.
Specifikation
Specifikation
Märke
|
Park Tool |
Bäst |
Beskrivning
Beskrivning
The Park Tool PP-1.2 Brake pad spreader is the ideal tool for replacing and correcting your disc brake pads.
Piston spreaders
You use this tool to push the pistons of your hydraulic disc brakes back into the caliper. The force you apply must be evenly distributed over the whole surface of the piston. The piston must slide straight back into the calliper. Using a screwdriver or other tool for this job is very risky and can permanently damage the system.
Inadvertently squeezing the brake lever
Worn brake pads are easy to replace yourself and this tool will come in handy! The Park Tool disc brake press can also be used if you accidentally squeeze the brake lever while the wheel is off the bike. The piston will come out of the caliper in this case. The PP-1.2 enlarges the space between the brake blocks and ensures that the brake disc fits well between them again.
Visa mer
Visa mindre
Piston spreaders
You use this tool to push the pistons of your hydraulic disc brakes back into the caliper. The force you apply must be evenly distributed over the whole surface of the piston. The piston must slide straight back into the calliper. Using a screwdriver or other tool for this job is very risky and can permanently damage the system.
Inadvertently squeezing the brake lever
Worn brake pads are easy to replace yourself and this tool will come in handy! The Park Tool disc brake press can also be used if you accidentally squeeze the brake lever while the wheel is off the bike. The piston will come out of the caliper in this case. The PP-1.2 enlarges the space between the brake blocks and ensures that the brake disc fits well between them again.
Recensioner
Recensioner
4 / 5
Jag är nöjd
- Johan Willem 21 oktober 2023
Perfekt för återställning av mina kolvar
För- & Nackdelar
Gör vad den ska göra
Solid
Solid kvalitet
Automatiskt översatt
5 / 5
Gör vad den ska göra och gör det bra
- Dick 22 september 2023
Lätt i handen och är snyggt och robust. Som med all annan utrustning från Parktool är den solid och väl genomtänkt, så även detta verktyg.
För- & Nackdelar
Gör det bra
Trevligt handtag
Automatiskt översatt
4 / 5
Mycket nöjd
- Guus 1 juni 2023
Fungerar bra
För- & Nackdelar
Fungerar mycket bra
När jag sätter i nya block kan jag trycka isär dem
Skjuta isär dem
Automatiskt översatt
Ofta köpta tillsammans
Ofta köpta tillsammans
Relaterad produkt
Relaterad produkt
Jämför ovanstående produkterPark Tool PP-1.2 Hydraulisk skivbroms spridare | BBB Cycling Pistonfix BTL-115 | |
3 recensioner | 11 recensioner | |
Kvalitet | Bäst | Bättre |
292 | 231 | |
Denna produkt | Visa produkt |