Nederland
België
Deutschland
United Kingdom
Finland
Ireland
Luxembourg
Portugal
Poland
Österreich
France
España
Italia
Sverige
Danmark
Campagnolo AFS Steel Centerlock Bremseskive
Campagnolo AFS Steel Centerlock Bremseskive
2 Anmeldelser
1/2
Vejl. udsalgspris 285
257
28 rabat
Vælg en type for at se vores lager
- Levering 2-3 arbejdsdage
- Gratis levering med Track & Trace over 399 kr
- Trustpilot bedømmelse 4.7/5
- Nem returnering
Stil et spørgsmål om dette produkt
E-mail vores kundeserviceFordele og ulemper
Fordele og ulemper
- This sturdy rotor made of tempered steel is highly resistant to deformation caused by heat.
- Long and hard braking is no problem for this AFS rotor which provides excellent heat dissipation.
- When combined with Campagnolo disc brakes, this rotor offers good modulation and excellent braking power.
- This AFS rotor is not available in a larger size than 160 mm.
- Lockring not included in the scope of delivery.
Specifikationer
Specifikationer
|
Mærke
|
Campagnolo |
|
Type Cykel
|
Racercykel / Gravel bike & Cykelcross |
|
Montering
|
Centerlås |
|
Farve
|
Grå |
Beskrivelse
Beskrivelse
The Campagnolo AFS Centerlock brake disc is made for the roughest and most intense conditions. It is for good reason that you will find it in the Campagnolo EKAR groupset. Yet it is also used in the Record series. This lightweight, stylish rotor offers excellent stiffness and high-quality heat dissipation. The properties of tempered steel make this rotor highly resistant to deformation or fading in the heat of the ride!
High-quality, sturdy, lightweight rotor
Campagnolo's AFS Centerlock brake rotor is available in two sizes, 140 mm and 160 mm. Both are made of almost 2 mm thick tempered steel for optimum durability and ultimate performance. Tempered steel is used to make brake rotors that are lightweight, strong and resistant to corrosion. This particular brake rotor can be used in all Campagnolo brake systems, and is compatible with AFS and centerlock systems.
• Compatible with all Campagnolo brake systems
For disc brake rotors, you have 2 different ways of mounting depending on the lock ring. One has an internal fit that you can tighten with a Cassette Removal Tool without a pin. If the inside of the key is open, it can reach far enough over the axle of the wheel. The other version is an external fit that you can tighten with a bottom bracket tool.
Vis mere
Vis mindre
High-quality, sturdy, lightweight rotor
Campagnolo's AFS Centerlock brake rotor is available in two sizes, 140 mm and 160 mm. Both are made of almost 2 mm thick tempered steel for optimum durability and ultimate performance. Tempered steel is used to make brake rotors that are lightweight, strong and resistant to corrosion. This particular brake rotor can be used in all Campagnolo brake systems, and is compatible with AFS and centerlock systems.
Kompatibilitet
• Compatible with AFS (Axial Fixing System) and centerlock systems• Compatible with all Campagnolo brake systems
Produktet indeholder
• 1x Campagnolo Ekar Centerlock rotor (140 mm or 160 mm)Montering
How do I mount a disc brake rotor?For disc brake rotors, you have 2 different ways of mounting depending on the lock ring. One has an internal fit that you can tighten with a Cassette Removal Tool without a pin. If the inside of the key is open, it can reach far enough over the axle of the wheel. The other version is an external fit that you can tighten with a bottom bracket tool.
Anmeldelser
Anmeldelser
5 / 5
Selvom jeg har været fast Shimano-bruger i årtier, anbefaler jeg Campagnolos bremseskiver.
- Rik 24 oktober 2023
Fordele og ulemper
Smukt færdiggjort
Automatisk oversat
5 / 5
Konstruktiv ekspertise
- Giuseppe Giovinazzi 2 september 2022
Meget veludførte skiver ... modulær bremsning ... fremragende køletid
Fordele og ulemper
Attraktivt design
Campagnolo høj kvalitet
Fasede skiver for at undgå snit
Fremragende materiale og konstruktion
Manglende låsering skal købes separat
Automatisk oversat
Ofte købt sammen
Ofte købt sammen
Relaterede produkter
Relaterede produkter
|
|
|
|
|
| Campagnolo AFS Steel Centerlock | BBB Cycling BBS-121 CenterStop | SRAM Paceline | SRAM Centerline Centerlock | |
| 2 Anmeldelser | 2 Anmeldelser | 1 Anmeldelse | 7 Anmeldelser | |
| Type Cykel | Racercykel / Gravel bike & Cykelcross | Racercykel / Gravel bike & Cykelcross | Racercykel / Gravel bike & Cykelcross / MTB / El mountainbike | Racercykel / Gravel bike & Cykelcross / MTB / El mountainbike |
| Montering | Centerlås | Centerlås | 6 huller / Centerlås | Centerlås |
| Diameter | 140 mm / 160 mm | 140 mm / 160 mm | 140 mm / 160 mm | 160 mm / 180 mm / 200 mm |
| Vægt | 123 gram / 157 gram | 150 gram / 190 gram | 118 gram / 140 gram | |
| Farve | Grå | Grå | Grå | Sort |
| 257 | Fra 195 | Fra 296 | Fra 265 | |
| Dette produkt | Se produkt | Se produkt | Se produkt |
Campagnolo AFS Steel Centerlock Bremseskive
Beskrivelse
The Campagnolo AFS Centerlock brake disc is made for the roughest and most intense conditions. It is for good reason that you will find it in the Campagnolo EKAR groupset. Yet it is also used in the Record series. This lightweight, stylish rotor offers excellent stiffness and high-quality heat dissipation. The properties of tempered steel make this rotor highly resistant to deformation or fading in the heat of the ride!High-quality, sturdy, lightweight rotor
Campagnolo's AFS Centerlock brake rotor is available in two sizes, 140 mm and 160 mm. Both are made of almost 2 mm thick tempered steel for optimum durability and ultimate performance. Tempered steel is used to make brake rotors that are lightweight, strong and resistant to corrosion. This particular brake rotor can be used in all Campagnolo brake systems, and is compatible with AFS and centerlock systems.
Kompatibilitet
• Compatible with AFS (Axial Fixing System) and centerlock systems• Compatible with all Campagnolo brake systems
Produktet indeholder
• 1x Campagnolo Ekar Centerlock rotor (140 mm or 160 mm)Montering
How do I mount a disc brake rotor?For disc brake rotors, you have 2 different ways of mounting depending on the lock ring. One has an internal fit that you can tighten with a Cassette Removal Tool without a pin. If the inside of the key is open, it can reach far enough over the axle of the wheel. The other version is an external fit that you can tighten with a bottom bracket tool.