Reviews over the

Park Tool BBT-90.3 Brackettool

Quality. I went for this one because Park tool is a good brand. In cheaper models, the spoons sometimes dare to have a little too little spring, which means the tool does not stay nicely behind the bearing and you could knock it through.

Pros & Cons

I chose this one over that copy of cheaper brand because of the quality that park tools provides. You put this one through your bearings. You hear it give 2 clicks. Then you know it's behind the bearing with the 'spoons' and then hammer it. Couple of taps and the bearings were out. Be sure to watch some instructional videos before doing this. Also be sure to check the diameter is correct. For shimano cranks type pressfit (105, ultegra or dura-ace this is already good)

Pros & Cons

Very practical and easy to use

Works perfectly for the BB on my Trek Procaliber 9.6

Pros & Cons

Useful & efficiency

Have used this to take out an SRAM dub but you have to be careful and especially with a carbon frame.

Pros & Cons

Outil très pratique pour extraire les boitiers Pressfit sans soucis mais avec un budget qui me semble un peu excessif pour ce que c'est.

Pros & Cons

Does what needs to be done