Nederland
België
Deutschland
United Kingdom
Finland
Ireland
Luxembourg
Portugal
Poland
Österreich
France
España
Italia
Sverige
Danmark
Shimano 105 R7100 Forskifter
Shimano 105 R7100 Forskifter
Vejl. udsalgspris 385
335
50 rabat
På lager
(Kun 3)
- Levering 2-3 arbejdsdage
- Gratis levering med Track & Trace over 399 kr
- Trustpilot bedømmelse 4.7/5
- Nem returnering
Stil et spørgsmål om dette produkt
E-mail vores kundeserviceFordele og ulemper
Fordele og ulemper
- The Shimano 105 R7100 has fast and reliable shifting performance for 12-speed.
- Smooth shifting from the inner to the outer chainring is guaranteed.
- Also able to shift gears without any problems while putting pressure on the pedals.
- Nice compact design for less air resistance.
- Easily adjustable cable tension.
- At Shimano 105 level, the weight is relatively a bit higher than previous Ultegra or Dura-ace level front derailleurs.
Specifikationer
Specifikationer
|
Mærke
|
Shimano |
| 12-speed | |
| Mekanisk | |
|
Montering
|
Svejsning |
|
Farve
|
Sort |
|
Type
|
Dobbelt / Kompakt |
Beskrivelse
Beskrivelse
The Shimano 105 R7100 Front derailleur is part of the Shimano R7120 12-speed mechanical groupset. The Shimano 105 R7100 mechanical front derailleur shifts smoothly and directly. As a result, there is no delay in shifting which was sometimes noticeable with 11-speed. Also, you can simply keep pressure on the pedals during your shifts.
Before you start (dis)assembling, shift the front derailleur to the smallest blade. That way, the tension on the shift cable will be smaller, making it easier to release the front derailleur.
Loosen the shift cable
Use an Allen key to loosen the shift cable from the derailleur. An Allen key can be found here.
Demount the chain
Before you can dismantle the derailleur, you also need to dismantle the chain. For this, you will need a chain breaker or missing link pliers. The chain breaker can be found here and the missing link pliers can be found here.
Position the front derailleur
When mounting, make sure you keep a space of about 2 mm between the outer edge of the derailleur and the largest chainring.
Adjust your derailleur
It is important to adjust the derailleur properly after fitting. This is a precise job, which you can read more about here.
Vis mere
Vis mindre
Montering
Reduce the tension on the shift cableBefore you start (dis)assembling, shift the front derailleur to the smallest blade. That way, the tension on the shift cable will be smaller, making it easier to release the front derailleur.
Loosen the shift cable
Use an Allen key to loosen the shift cable from the derailleur. An Allen key can be found here.
Demount the chain
Before you can dismantle the derailleur, you also need to dismantle the chain. For this, you will need a chain breaker or missing link pliers. The chain breaker can be found here and the missing link pliers can be found here.
Position the front derailleur
When mounting, make sure you keep a space of about 2 mm between the outer edge of the derailleur and the largest chainring.
Adjust your derailleur
It is important to adjust the derailleur properly after fitting. This is a precise job, which you can read more about here.
Anbefalet af produktspecialisten
Anbefalet af produktspecialisten
Relatered produkt
Relatered produkt
Sammenlign ovennævnte produkter
|
|
|
| Shimano 105 R7100 | Campagnolo Record 12 Speed | |
| 0 Anmeldelser | 2 Anmeldelser | |
| Antal gear | 12-speed | 12-speed |
| Måde at skifte gear på | Mekanisk | Mekanisk |
| Montering | Svejsning | Svejsning |
| Farve | Sort | Sort |
| Type | Dobbelt / Kompakt | Dobbelt / Kompakt |
| 335 | 779 | |
| Dette produkt | Se produkt |
Shimano 105 R7100 Forskifter
Beskrivelse
The Shimano 105 R7100 Front derailleur is part of the Shimano R7120 12-speed mechanical groupset. The Shimano 105 R7100 mechanical front derailleur shifts smoothly and directly. As a result, there is no delay in shifting which was sometimes noticeable with 11-speed. Also, you can simply keep pressure on the pedals during your shifts.Montering
Reduce the tension on the shift cableBefore you start (dis)assembling, shift the front derailleur to the smallest blade. That way, the tension on the shift cable will be smaller, making it easier to release the front derailleur.
Loosen the shift cable
Use an Allen key to loosen the shift cable from the derailleur. An Allen key can be found here.
Demount the chain
Before you can dismantle the derailleur, you also need to dismantle the chain. For this, you will need a chain breaker or missing link pliers. The chain breaker can be found here and the missing link pliers can be found here.
Position the front derailleur
When mounting, make sure you keep a space of about 2 mm between the outer edge of the derailleur and the largest chainring.
Adjust your derailleur
It is important to adjust the derailleur properly after fitting. This is a precise job, which you can read more about here.