Campagnolo Bora One 35 Dark Label Rennrad Laufräder

The Campagnolo Bora One 35 Dark Label road bike wheels are lightweight, comfortable and accelerate easily after a bend or with a tempo gear. The 3k carbon structure gives the Campagnolo Bora One 35 Dark Label wheels a chic look that suits any bike. If you are looking for an absolute upgrade in quality with a great look, the Campagnolo Bora One 35 Dark Label wheelset is the best choice.

DYNAMIC BALANCE
The concept is simple and elegant: balance the weight of the gasket, with an item of similar weight placed on the exact opposite side. For top models, this is obtained by a special operation on the section of the rim opposite the rim joint.

3DIAMANT
This new process eliminates the "running-in period", improves braking performance in both wet and dry conditions, and provides improved dosability and smoother braking performance.

G3 GEOMETRY
Campagnolo has developed an assembly architecture which, compared with a traditional wheel, makes it possible to improve energy transfer, reduce the stress on the spokes on the right and increase transverse rigidity.This is achieved because in G3 geometry the right-hand side of the rear wheel is fitted with twice as many spokes as the left.

• Cassette remover Shimano or Campagnolo
• (possibly a torque wrench)

Installing a cassette on a wheel is easy if you have the right tools. If you purchase a cassette remover with a Shimano fit, you will be able to mount either a Shimano or Sram cassette on your rear wheel. Please note! For a Campagnolo cassette you need the Campagnolo tool. If you have a Shimano 9/10-speed cassette, first slide the spacer over the body. Then you place the cassette on the body. This can only be done in one way because of the fit of the body. Finally you turn the washer straight on by hand and tighten it with the cassette tool. Cassettes aren’t easily overtightened, but if you want you can use a torque wrench for this.

• Pay attention to the direction of travel when mounting your tyres.
• For Shimano 9/10-speed, do not forget to mount the spacer first before installing the cassette.
• Make sure the rim tape is stuck well in the rim.
• On both the front and rear wheel, there is a small adjustment screw on the left-hand side to adjust the side play.