Reviews over the
Marwi Balhoofdsleutel 30-32x36-40
2 / 5
Cheap is expensive
I bought 2 pieces for loosening and tightening steering head nuts. I first used the 32mm jaw opening and there is so much play on this (the opening is too big) that I damaged the headstock nut. I then measured both spanners and they are on average about 0.5mm too big. So the factory tolerance is not anything to write home about. I returned the set.
Pros & Cons
5 / 5
headset bearing adjustment went perfectly
everything as agreed and fast delivery
4 / 5
Finish a little rough but compatible with the job.
Great for the price, job got done with it.
Pros & Cons
4 / 5
excellent tool
light yet strong, fits well ie no play. delivered quickly
Pros & Cons
5 / 5
Indispensable for your bicycle maintenance
Nice that there are different size choices on the key
Pros & Cons
5 / 5
Good tool
Just the right tool for adjusting headset bearings. Nice and narrow and strong enough for the job.
Pros & Cons
1 / 5
Works but not without scratches
Coarse finish so unsuitable if you don't want to scratch the headstock. Coarse messy sharp edges. Can be filed off but at the expense of anti-rust coating.
Pros & Cons
2 / 5
bad workmanship
handle not comfortable hurts