Nederland
België
Deutschland
United Kingdom
Finland
Ireland
Luxembourg
Portugal
Poland
Österreich
France
España
Italia
Sverige
Danmark
Topeak JoeBlow Mountain Fodpumpe
Topeak JoeBlow Mountain Fodpumpe
1/12
Dette produkt er udgået og kommer ikke tilbage på lager.
- Trustpilot bedømmelse 4.7/5
- Nem returnering
Stil et spørgsmål om dette produkt
E-mail vores kundeserviceBeskrivelse
Beskrivelse
The Topeak Joe Blow Mountain is the ideal pump for mountain bikes. In every aspect, this pump is specialised for the extremely precise inflation of an MTB outer tyre.
The ideal tyre pressure
Because the pressure gauge is extra sensitive and accurate made for MTB applications, you can determine the pressure of your tyres very precisely.
Construction
The Joe Blow Mountain has an extra high pump volume thanks to its very wide steel pump cylinder. This allows you to blow a lot of volume into the tyre per stroke, making it bulge in no time! The Joe Blow Mountain can pump up to 4 bar (60 psi). This is more than sufficient for almost all MTB tyres. The base and handle are made of a very strong composite, which makes the pump feel stable and durable.
The TwinHead pumphead is suitable for Presta, Schrader and Dunlop valves. Simply turn the handle to lock the pump head onto the valve. The TwinHead also has an air release button. With this button you can easily and in a controlled way release air from the tyre, so you can adjust the ideal tyre pressure for your mountain bike.
- Pumphead: TwinHead with air-release button and extra long pump tube (86 cm)
- Pump range: 60 psi / 4 bar
- Pressure gauge: analogue
- Pump sleeve: painted steel
- Pump sleeve diameter: 44.4 mm
- Base: plastic
- Weight: 1.74 kilograms
- Volume per stroke: 722 cc
- Dimensions: 69 x 23 x 17 cm
There are various parts available for this pump, such as pump head parts and the hose. We do not have any of these in our range (currently).
How do I change the valve type of this Topeak JoeBlow Mountain pump?
This pump has a double valve head on both sides. The lever ensures that the air comes out of the right hole. There is also an air release button which allows a small amount of air to escape so that the pump head can be easily released from the valve. Here you will find the JoeBlow Mountain manual.
What's the difference between a High Pressure (HP) and High Volume pump?
Depending on the type of tyre you have, you might prefer either an HP or a HV pump. High-pressure pumps move a smaller volume of air with each stroke, but can do so up to 220 psi (may vary, check individual pump specifications) and thus better suited for skinny road tyres. A High Volume pump, on the other hand, pumps more volume into the tyre per pump stroke. More efficient for very large tyres such as MTB tyres.
Vis mere
Vis mindre
The ideal tyre pressure
Because the pressure gauge is extra sensitive and accurate made for MTB applications, you can determine the pressure of your tyres very precisely.
Construction
The Joe Blow Mountain has an extra high pump volume thanks to its very wide steel pump cylinder. This allows you to blow a lot of volume into the tyre per stroke, making it bulge in no time! The Joe Blow Mountain can pump up to 4 bar (60 psi). This is more than sufficient for almost all MTB tyres. The base and handle are made of a very strong composite, which makes the pump feel stable and durable.
Teknologier
TwinHead pump headThe TwinHead pumphead is suitable for Presta, Schrader and Dunlop valves. Simply turn the handle to lock the pump head onto the valve. The TwinHead also has an air release button. With this button you can easily and in a controlled way release air from the tyre, so you can adjust the ideal tyre pressure for your mountain bike.
- Pumphead: TwinHead with air-release button and extra long pump tube (86 cm)
- Pump range: 60 psi / 4 bar
- Pressure gauge: analogue
- Pump sleeve: painted steel
- Pump sleeve diameter: 44.4 mm
- Base: plastic
- Weight: 1.74 kilograms
- Volume per stroke: 722 cc
- Dimensions: 69 x 23 x 17 cm
Kompatibilitet
• Suitable for all valves (Presta, Schrader and Dunlop)Produktet indeholder
Additional valve nipple for balls and air mattressesOfte stillede spørgsmål
Can I replace individual parts of this Topeak JoeBlow Mountain bike pump if required?There are various parts available for this pump, such as pump head parts and the hose. We do not have any of these in our range (currently).
How do I change the valve type of this Topeak JoeBlow Mountain pump?
This pump has a double valve head on both sides. The lever ensures that the air comes out of the right hole. There is also an air release button which allows a small amount of air to escape so that the pump head can be easily released from the valve. Here you will find the JoeBlow Mountain manual.
What's the difference between a High Pressure (HP) and High Volume pump?
Depending on the type of tyre you have, you might prefer either an HP or a HV pump. High-pressure pumps move a smaller volume of air with each stroke, but can do so up to 220 psi (may vary, check individual pump specifications) and thus better suited for skinny road tyres. A High Volume pump, on the other hand, pumps more volume into the tyre per pump stroke. More efficient for very large tyres such as MTB tyres.
Anmeldelser
Anmeldelser
Gennemsnitlig fra 25 Anmeldelser
Nyeste anmeldelser
4 / 5
Jeg er glad for det.
- Perry 29 oktober 2023
Fungerer godt.
Fordele og ulemper
God vægt
Forfærdelig plasttilslutningsnippel.
Automatisk oversat
5 / 5
Det bedste produkt
- J.G Verkade 7 september 2023
Alt er tilfredsstillende, både pumpen og leveringen fra Mantel gik fint og glat, fik pumpen leveret næste dag.
Fordele og ulemper
Lige så god til MTB som til almindelig cykel
Pumper hurtigt dine dæk op
Endnu ikke fundet
Automatisk oversat
5 / 5
Fantastisk køb, skulle have gjort det meget tidligere
- Gertjan 8 juli 2022
Alt, hvad der er sagt om denne pumpepølse, er sandt. Med et ord: fantastisk god!!!
Fordele og ulemper
Nem at bruge
Pumper nemt bildæk op
Superrrrr pumpe
Nej
Automatisk oversat
5 / 5
Anbefales til MTB eller bil
- Rui 2 marts 2022
En rigtig fin pumpe, som også er let at aflæse ved lavt tryk takket være skalaen op til 4 bar. MTB-dækkene er pumpet op på ingen tid, men bilen er også tryksat på ingen tid.
Fordele og ulemper
Du kan sætte tryk på dækket meget præcist
Let at aflæse, selv ved lavt tryk
Også nyttig til bildæk
Solid, flot finish
Når man kobler fra, kan der slippe luft ud
Automatisk oversat
5 / 5
God pumpe
- Martijn 6 februar 2022
Fin ting, lidt dyr, men føles godt! Pumper lidt tungt, men pumper mere luft pr. slag ind i dækket.
Fordele og ulemper
Bedre til slangeløse dæk
Masser af luft pr. slag
Mindre bar muligt end ellers
Pumper kraftigere
Automatisk oversat
5
Rui, 2 marts 2022
Anbefales til MTB eller bil
En rigtig fin pumpe, som også er let at aflæse ved lavt tryk takket være skalaen op til 4 bar. MTB-dækkene er pumpet op på ingen tid, men bilen er også tryksat på ingen tid.
-
Du kan sætte tryk på dækket meget præcist
-
Let at aflæse, selv ved lavt tryk
-
Også nyttig til bildæk
-
Når man kobler fra, kan der slippe luft ud
Automatisk oversat
Relaterede produkter
Relaterede produkter
|
|
|
|
| Topeak JoeBlow Mountain | BBB Cycling AirSwitch HP/HV | JUMBO Basic, Dunlop Valve | |
| 25 Anmeldelser | 0 Anmeldelser | 10 Anmeldelser | |
| Montering af pumpehoved | Spænde fast | Spænde fast | Spænde fast |
| Type cykelpumpe | Fodpumpe | Fodpumpe | Fodpumpe |
| Hvilken type cykel har du? | Elcykel / Gravelbike / Mountainbike / Citybike | Elcykel / Gravelbike / Mountainbike / Racercykel / Citybike | Elcykel / Citybike |
| Ventilkompatibilitet | Presta / Schrader / Dunlop | Presta / Schrader | Dunlop |
| Manometer typer | Analog | Analog | Ingen |
| Type af pumpetryk | Høj volumen | Højt tryk / Høj volumen | Høj volumen |
| 382 | 460 | 179 | |
| Dette produkt | Se produkt | Se produkt |
Alle specifikationer
General
Topeak JoeBlow Mountain Fodpumpe
Alle specifikationer
Mærke
Topeak
General
Egenskaber
Topeak JoeBlow Mountain Fodpumpe
Beskrivelse
The Topeak Joe Blow Mountain is the ideal pump for mountain bikes. In every aspect, this pump is specialised for the extremely precise inflation of an MTB outer tyre.The ideal tyre pressure
Because the pressure gauge is extra sensitive and accurate made for MTB applications, you can determine the pressure of your tyres very precisely.
Construction
The Joe Blow Mountain has an extra high pump volume thanks to its very wide steel pump cylinder. This allows you to blow a lot of volume into the tyre per stroke, making it bulge in no time! The Joe Blow Mountain can pump up to 4 bar (60 psi). This is more than sufficient for almost all MTB tyres. The base and handle are made of a very strong composite, which makes the pump feel stable and durable.
Teknologier
TwinHead pump headThe TwinHead pumphead is suitable for Presta, Schrader and Dunlop valves. Simply turn the handle to lock the pump head onto the valve. The TwinHead also has an air release button. With this button you can easily and in a controlled way release air from the tyre, so you can adjust the ideal tyre pressure for your mountain bike.
- Pumphead: TwinHead with air-release button and extra long pump tube (86 cm)
- Pump range: 60 psi / 4 bar
- Pressure gauge: analogue
- Pump sleeve: painted steel
- Pump sleeve diameter: 44.4 mm
- Base: plastic
- Weight: 1.74 kilograms
- Volume per stroke: 722 cc
- Dimensions: 69 x 23 x 17 cm
Kompatibilitet
• Suitable for all valves (Presta, Schrader and Dunlop)Produktet indeholder
Additional valve nipple for balls and air mattressesOfte stillede spørgsmål
Can I replace individual parts of this Topeak JoeBlow Mountain bike pump if required?There are various parts available for this pump, such as pump head parts and the hose. We do not have any of these in our range (currently).
How do I change the valve type of this Topeak JoeBlow Mountain pump?
This pump has a double valve head on both sides. The lever ensures that the air comes out of the right hole. There is also an air release button which allows a small amount of air to escape so that the pump head can be easily released from the valve. Here you will find the JoeBlow Mountain manual.
What's the difference between a High Pressure (HP) and High Volume pump?
Depending on the type of tyre you have, you might prefer either an HP or a HV pump. High-pressure pumps move a smaller volume of air with each stroke, but can do so up to 220 psi (may vary, check individual pump specifications) and thus better suited for skinny road tyres. A High Volume pump, on the other hand, pumps more volume into the tyre per pump stroke. More efficient for very large tyres such as MTB tyres.