Fulcrum Racing Zero Competizione Cykelhjul Racer

Fulcrum Racing Zero Competizione er ny i Zero-serien. Hjulsættet er udstyret med alle teknikker fra den eksisterende Zero hjul, men bare med lige lidt mere kvalitet, for at lukke hullet mellem Zero og Zero Carbon hjul. Hjulsættet er bl.a. udstyret med keramiske Cult-lejer i stedet for USB-lejer, som sikrer en bedre friløb og holdbarhed af navene.
Det 2-Way fit system gør det muligt, at køre tubeless hvormed du kan undgå punkteringer. Momag teknikken (ingen huller i fælgen) sikrer en bedre stivhed af fælgene. Desuden gør hjulsættet brug af C17 fælge, som sikrer, at fælgen er velegnet til 25 og 28 mm dæk.

• Fulcrum Racing Zero Competizione hjulsæt
• Spacer til 10-speed kassette
• Quick Release

• Cassette remover Shimano or Campagnolo
• (possibly a torque wrench)

Installing a cassette on a wheel is easy if you have the right tools. If you purchase a cassette remover with a Shimano fit, you will be able to mount either a Shimano or Sram cassette on your rear wheel. Please note! For a Campagnolo cassette you need the Campagnolo tool. If you have a Shimano 9/10-speed cassette, first slide the spacer over the body. Then you place the cassette on the body. This can only be done in one way because of the fit of the body. Finally you turn the washer straight on by hand and tighten it with the cassette tool. Cassettes aren’t easily overtightened, but if you want you can use a torque wrench for this.

• Pay attention to the direction of travel when mounting your tyres.
• For Shimano 9/10-speed, do not forget to mount the spacer first before installing the cassette.
• Make sure the rim tape is stuck well in the rim.
• On both the front and rear wheel, there is a small adjustment screw on the left-hand side to adjust the side play.