Ruote Bici da Corsa Fulcrum Racing Zero Competizione
Ruote Bici da Corsa Fulcrum Racing Zero Competizione
Questo prodotto è esaurito e non rientra più in assortimento.
- Valutazione Trustpilot 4.7/5
- Restituzione facile
Fai una domanda su questo prodotto
Caratteristiche tecniche
Caratteristiche tecniche
| Marca | Fulcrum | |
| Peso del produttore | 1475 grammi | |
| Tipo di freno | freno a pinza | |
| Tipo di copertone | Pneumatico pieghevole / Tubeless | |
| Peso totale massimo | 109 kg | |
| Tipo di ruota | Set di ruote | |
| Materiale del Cerchio | Alluminio | |
| Materiale superficie frenante | Alluminio | |
| Materiale raggio | Allumino |
Le Fulcrum Racing Zero Competizione sono ruote nuovissime all'interno dell'assortimento Zero. Queste ruote contengono tutte le tecnologie derivanti dalle già esistenti ruote Zero, solo con quel tocco di qualità in più per colmare il divario tra le ruote Zero e le Zero Carbon. Le Zero Competizione ad esempio, utilizzano i cuscinetti in ceramica Cult invece dei cuscinetti USB per garantire una maggiore durata dei mozzi. In più presentano il sistema 2-Way Fit, il quale rende possibile la guida tubeless, ragion per quale le forature sono acqua passata. Inoltre, è stata aggiunta anche la tecnologia Momag, la quale assicura che i fori dei raggi siano perforati solo nella parte superiore del cerchio e non in quella inferiore. Ciò migliora la rigidità dei cerchi. Questo set di ruote utilizza cerchi C17, i quali si adattano ancora meglio ai copertoni da 25mm e 28mm
• Set di ruote Fulcrum Racing Zero Competizione
• Distanziali per cassette da 10 velocità
• Sganci rapidi
• Distanziali per cassette da 10 velocità
• Sganci rapidi
• Cassette remover Shimano or Campagnolo
• (possibly a torque wrench)
Installing a cassette on a wheel is easy if you have the right tools. If you purchase a cassette remover with a Shimano fit, you will be able to mount either a Shimano or Sram cassette on your rear wheel. Please note! For a Campagnolo cassette you need the Campagnolo tool. If you have a Shimano 9/10-speed cassette, first slide the spacer over the body. Then you place the cassette on the body. This can only be done in one way because of the fit of the body. Finally you turn the washer straight on by hand and tighten it with the cassette tool. Cassettes aren’t easily overtightened, but if you want you can use a torque wrench for this.
• (possibly a torque wrench)
Installing a cassette on a wheel is easy if you have the right tools. If you purchase a cassette remover with a Shimano fit, you will be able to mount either a Shimano or Sram cassette on your rear wheel. Please note! For a Campagnolo cassette you need the Campagnolo tool. If you have a Shimano 9/10-speed cassette, first slide the spacer over the body. Then you place the cassette on the body. This can only be done in one way because of the fit of the body. Finally you turn the washer straight on by hand and tighten it with the cassette tool. Cassettes aren’t easily overtightened, but if you want you can use a torque wrench for this.
• Pay attention to the direction of travel when mounting your tyres.
• For Shimano 9/10-speed, do not forget to mount the spacer first before installing the cassette.
• Make sure the rim tape is stuck well in the rim.
• On both the front and rear wheel, there is a small adjustment screw on the left-hand side to adjust the side play.
• For Shimano 9/10-speed, do not forget to mount the spacer first before installing the cassette.
• Make sure the rim tape is stuck well in the rim.
• On both the front and rear wheel, there is a small adjustment screw on the left-hand side to adjust the side play.
Recensione
Prodotti simili
Prodotti simili
|
|
|
|
|
|
| Fulcrum Racing Zero Competizione | Scope S4 Rim | Shimano Ultegra WH-RS500 | Campagnolo Zonda | |
| 12 Recensioni | 3 Recensioni | 14 Recensioni | 160 Recensioni | |
| Tipo di corpetto | SRAM Race 10/11 velocità / Shimano Race HG 9-12 velocità / Campagnolo 9-12 velocità / 9 - 12 speed | SRAM Race 10/11 velocità / Shimano Race HG 9-12 velocità | SRAM Race 10/11 velocità / Shimano Race HG 9-12 velocità | SRAM Race 10/11 velocità / Shimano Race HG 9-12 velocità / Campagnolo 9-12 velocità |
| Peso del produttore | 1475 grammi | 1555 grammi | 1649 grammi | |
| Tipo di freno | freno a pinza | freno a pinza | freno a pinza | freno a pinza |
| Tipo di copertone | Pneumatico pieghevole / Tubeless | Pneumatico pieghevole / Tubeless | Pneumatico pieghevole / Tubeless | Pneumatico pieghevole |
| Peso totale massimo | 109 kg | 95 kg | 120 kg | 110 kg |
| Tipo di ruota | Set di ruote | Set di ruote | Set di ruote / Ruota Anteriore / Ruota Posteriore | Set di ruote |
| 956,84 | 1 006,25 | Da 171,36 | Da 383,09 | |
| Questo prodotto | Vedi prodotto | Vedi prodotto | Vedi prodotto |
Tutte le caratteristiche tecniche
Generale
Marca
Fulcrum
Peso del produttore
1475 grammi
Tipo di freno
freno a pinza
Tipo di copertone
Pneumatico pieghevole / Tubeless
Peso totale massimo
109 kg
Colore adesivo
Rosso
Colore
Nero
Componenti
Materiale del Cerchio
Alluminio
Materiale superficie frenante
Alluminio
Materiale raggio
Allumino
Tipo di raggio
Straight pull
Tipo di nipple
Esterno
Materiale Nipple
Alluminio
Tipo di cuscinetti
Cono-sfera
Numero di raggi della ruota anteriore
16
Numero di raggi della ruota posteriore
21
Misura
Tipo di ruota
Set di ruote
Dimensioni
Altezza cerchio
27mm / 30mm
Larghezza cerchio
22,5 mm
Larghezza cerchio (interna)
17 mm
Larghezza dello pneumatico adatta
25 mm / 28 mm / 30 mm / 32 mm / 35 mm / 37 mm / 40 mm / 42 mm / 47 mm / 50 mm
Larghezza del mozzo anteriore
100 x 5 mm QR
Larghezza mozzo posteriore
130 x 5 mm QR
Altro
Crash replacement
No
Garanzia estesa
No
Garanzia
2 anni
Collezione
2020
In dotazione
Pastiglie dei freni incluse
No
Sgancio rapido incluso
Si