Fulcrum Racing Zero Carbon Cykelhjul Racer
Fulcrum Racing Zero Carbon Cykelhjul Racer
Dette produkt er udgået og kommer ikke tilbage på lager.
- Trustpilot bedømmelse 4.7/5
- Nem returnering
Stil et spørgsmål om dette produkt
E-mail vores kundeserviceBeskrivelse
Beskrivelse
The Fulcrum Racing Zero Carbon 2019 road bike wheels are real climbing wheels for hilly terrain. However, because of the light rims, the Fulcrum Racing Zero Carbon wheels also perform well in terms of acceleration. Not only does the performance stand out, but the Fulcrum Racing Zero Carbon wheels also look amazing. They are perhaps one of the most beautiful wheels you can have in your road bike.
• (possibly a torque wrench)
Installing a cassette on a wheel is easy if you have the right tools. If you purchase a cassette remover with a Shimano fit, you will be able to mount either a Shimano or Sram cassette on your rear wheel. Please note! For a Campagnolo cassette you need the Campagnolo tool. If you have a Shimano 9/10-speed cassette, first slide the spacer over the body. Then you place the cassette on the body. This can only be done in one way because of the fit of the body. Finally you turn the washer straight on by hand and tighten it with the cassette tool. Cassettes aren’t easily overtightened, but if you want you can use a torque wrench for this.
• For Shimano 9/10-speed, do not forget to mount the spacer first before installing the cassette.
• Make sure the rim tape is stuck well in the rim.
• On both the front and rear wheel, there is a small adjustment screw on the left-hand side to adjust the side play.
Vis mere
Vis mindre
Montering
• Cassette remover Shimano or Campagnolo• (possibly a torque wrench)
Installing a cassette on a wheel is easy if you have the right tools. If you purchase a cassette remover with a Shimano fit, you will be able to mount either a Shimano or Sram cassette on your rear wheel. Please note! For a Campagnolo cassette you need the Campagnolo tool. If you have a Shimano 9/10-speed cassette, first slide the spacer over the body. Then you place the cassette on the body. This can only be done in one way because of the fit of the body. Finally you turn the washer straight on by hand and tighten it with the cassette tool. Cassettes aren’t easily overtightened, but if you want you can use a torque wrench for this.
Tips til brug
• Pay attention to the direction of travel when mounting your tyres.• For Shimano 9/10-speed, do not forget to mount the spacer first before installing the cassette.
• Make sure the rim tape is stuck well in the rim.
• On both the front and rear wheel, there is a small adjustment screw on the left-hand side to adjust the side play.
Relaterede produkter
Relaterede produkter
Fulcrum Racing Zero Carbon | Scope R5 Rim | Campagnolo Bora WTO 60 | Campagnolo Bora WTO 45 | |
5 Anmeldelser | 2 Anmeldelser | 3 Anmeldelser | 2 Anmeldelser | |
Type kassette-body | SRAM Race 10/11-speed / Shimano Race HG 9-12-speed / Campagnolo 9-12-speed / 9 - 12 speed | SRAM Race 10/11-speed / Shimano Race HG 9-12-speed | SRAM Race 10/11-speed / Shimano Race HG 9-12-speed / Campagnolo 9-12-speed | SRAM Race 10/11-speed / Shimano Race HG 9-12-speed / Campagnolo 9-12-speed |
Vægt (vejet af Mantel) | 1340 gram | |||
Type bremse | Fælgbremse | Fælgbremse | Fælgbremse | Fælgbremse |
Dæktype | Foldedæk | Foldedæk / Tubeless | Foldedæk / Tubeless | Foldedæk / Tubeless |
Maksimal samlet vægt | 109 kg | 120 kg | 110 kg | 110 kg |
Type af hjul | Hjulsæt | Hjulsæt | Hjulsæt | Hjulsæt |
10 878 | 11 679 | 13 246 | 13 246 | |
Dette produkt | Se produkt | Se produkt | Se produkt |
Alle specifikationer
General
Komponenter
Dimensioner
Inkluderet
Bremseklodser inkluderet
Ja
Quick release medfølger
Ja
Hjultaske medfølger
Ja