Elitewheels Drive SL 48D SS Cykelhjul Racer

The Elitewheels Drive SL 48D SS combines an aerodynamic rim profile of 48 millimetres with a low total weight of 1400 grams per set. A great all-rounder: light enough to climb comfortably, with enough rim depth to hold speed on the flat as well. The wide internal rim width of 25 millimetres is optimised for modern tyres and, combined with lower tyre pressure, provides more comfort and grip. With Sapim CX-Ray spokes and a titanium freehub, this wheelset delivers a light weight and a robust construction.

Rim and construction

The rim has a depth of 48 millimetres and an internal width of 25 millimetres, with a UD semi-matte finish. Thanks to the generous internal width, the so-called balloon effect disappears after inflation, which provides better sidewall support when steering and when sprinting out of the saddle. The rims are optimised for tyres of 29 to 32 millimetres and support lower tyre pressure, so vibrations are damped better and you ride more comfortably over long distances. The front and rear rims have their own profile: the external width of 36 millimetres at the front provides stability in crosswinds and precise handling, while the 34 millimetres at the rear reduces air resistance and improves aerodynamic efficiency behind the rider. This brings the total weight to just 1400 grams per set.

One-piece titanium freehub

The ratchet ring and the freehub are machined from a single piece of titanium, with a 60T ratchet and a 6-degree engagement angle. This makes the hub lighter than a multi-piece freehub and delivers direct power transfer as soon as you pull on the pedals.

25 mm internal rim width

A wider rim supports the sidewall of your tyre better, so you can run a lower tyre pressure. This gives more grip and comfort, while the rim profile is still optimised for 29 to 32C tyres.

Hub balance of no more than 7 kgf

The spoke tension on both sides of the rear hub is precisely set to a difference of at most 7 kgf. That means less deformation of the wheel when sprinting and more direct power transfer.

Fits:

• Frames and forks with a thru-axle: 12x100 mm front and 12x142 mm rear.
• Disc brakes with a Centerlock mount.
• Shimano HG 9 to 12-speed and SRAM 11-speed cassettes, with the Shimano HG 9-12 freehub option.
• SRAM XDR 12 and 13-speed cassettes, with the SRAM XDR 12/13 freehub option.
• Tyres from 700x29 to 58C, both clincher and tubeless; the rim profile is optimised for 29 to 32C.
• A maximum rider weight of 120 kg. Note: this is the total weight of rider, bike and equipment combined, not just your own body weight.

Does not fit:

• Frames with a quick release: this wheelset is made exclusively for thru-axles.
• Shimano Micro Spline (MSR) cassettes: these do not fit the Shimano HG or SRAM XDR freehub we supply with this wheel.
• 6-bolt brake discs, unless you fit a Centerlock-to-6-bolt adapter.
• Freehub bodies from other brands: the hub is a proprietary Elitewheels design.

Not sure? Here's how to check: count the number of sprockets on your current cassette and check on the cassette itself or in the manual of your groupset whether it is Shimano HG or SRAM XDR. If you currently ride a 9 or 10-speed Shimano cassette on an HG body, you need an extra 1.85 mm spacer, just like with most SRAM XD MTB cassettes on an XDR body.

Included as standard:

• Complete wheelset (front and rear wheel).
• Tubeless rim tape, already fitted.
• Tubeless valves, already fitted.

Not included / still needed or handy:

• Cassette and brake discs.
• Inner tubes, if you don't ride tubeless.
• Centerlock-to-6-bolt adapter, if you use brake discs with a 6-bolt mount.