Dynamic Speed Potion Wax

Et grønnere valg

Som cyklist er du allerede godt i gang med at reducere dit økologiske fodaftryk. Men det er ikke alle cykelprodukter, der er gode for miljøet. Vi vil gerne hjælpe dig med at træffe et "grønnere valg". Et særligt udvalg af produkter, der er fremstillet af genbrugsmaterialer, med bedre produktionsprocesser eller som er biologisk nedbrydelige. Gør din del og cykl grønt!

Beskrivelse

Dynamic Speed Potion Wax is the cream of the crop when it comes to chain waxes. This high quality chain wax doesn't just reduce friction between the chain, cogs and chainrings, improving efficiency, it is also environmentally sustainable and reduces the wear on your drivetrain components. Additionally, the non-sticky character of wax means that it doesn't attract dirt.

Developed for the strongest and best riders
Dynamic was asked to develop the ultimate lubricant that would allow drivetrains to perform optimally in situations of high power output and max effort, like those of World Tour cyclists. Dynamic is set to work and, in collaboration with pro cyclists and mechanics, developed Speed Potion Wax. Team Jumbo Visma uses this chain wax exclusively, with the goal of winning the Tour de France. Dynamic Speed Potion Wax consists of 17% additives that reduce the friction of the chain with the chainrings. As a result less power is lost and power transfer is more efficient.

Durability
Chain oils are such that they automatically flow back to the places in the chain where lubrication is needed. Wax, on the other hand, hardens and acts as a coating on the chain. However, once this coating has been displaced on the chain by high forces, it will no longer flow back. Dynamic has thought of this problem with the Speed Potion Wax and has come up with a solution. The Speed Potion Wax has a higher Brugger-value than other high-quality chain waxes, making this coating resistant to higher forces. Furthermore, the Speed Potion is very elastic, which means that once the coating has cured, it will stay in the right places in the chain for a lot longer. Even if you're pedaling at a very high wattage, such as while sprinting or climbing, the Speed Potion Wax will continue to do its job. This keeps your chain feeling noticeably 'smooth' for a very long time and your chain makes less noise while cycling.

The first application of Speed Potion Wax
Dynamic recommends two ways to apply the Speed Potion Wax for the first time. The first option is to apply a drop of the wax to each link of the chain on the inside and outside. Make sure that you do not use too little or too much, but apply enough wax so that the contact points of the chain are well lubricated.
The second option is to remove the chain from the bike and immerse it completely in Speed Potion Wax. Make sure that you make the air bubbles that occur during the immersion disappear by shaking well. Then let the chain dry thoroughly before you put the chain back on your bike.

Biodegradable
The Speed Potion Wax is completely biodegradable. This makes the use of this wax less harmful to the environment.

Tips til brug

Storage tips
• Always store Speed Potion Wax with the lid on. If the wax comes into contact with air it will harden.

Application tips
• Shake the bottle well before each use. The air in the bottle can cause the wax in the nozzle to harden, and shaking the bottle will help to mix the wax properly again.
• Keep in mind that the wax needs to be applied at temperatures between 15 and 35 degrees Celsius. Once hard, the wax can of course withstand much higher and lower temperatures.
• It is recommended to use the Speed Potion at least 2 hours before the start of the ride. This gives the wax enough time to harden properly. For best results, it is recommended to apply the wax to your chain 24 hours before the start of the ride.

During-use tips
• The Speed Potion Wax has been developed for dry conditions, but can in principle also be used in wet conditions. However, if conditions are really wet, it's wise to use a non-wax based lubricant.