Nederland
België
Deutschland
United Kingdom
Finland
Ireland
Luxembourg
Portugal
Poland
Österreich
France
España
Italia
Sverige
Danmark
Silca Ultimate Tubeless Sealant
Silca Ultimate Tubeless Sealant
Rek. pris 362
Från 354
8 rabatt
Välj en version för att se tillgängligheten
- Leverans inom 3-5 arbetsdagar
- Fri frakt vid 699 kr
- Trustpilot omdöme 4.7/5
- Enkel returnering
Ställ en fråga om denna produkt
Maila kundserviceFör- & Nackdelar
För- & Nackdelar
- Seals larger holes up to 7.5mm, without compromising tyre life and handling.
- CO2 can be used to fit tyres, but should be removed as soon as possible and replaced with air.
- High-quality tubeless sealant that makes it very easy to make your tyres tubeless in one go.
- 6, 9 and 12 mm recycled carbon fibres are evenly dispersed by a foaming latex to create ultra-strong seals.
- Retains its effectiveness down to -12 degrees Celsius.
- Not compatible with injectors (it seals holes larger than a syringe).
- Do not spray it through the valve but put it in the tyre and then mount it. May seal valve otherwise.
Specifikation
Specifikation
|
Märke
|
Silca |
| Nej |
Beskrivning
Beskrivning
The Silca Ultimate Tubeless Sealant is a latex to get your tubeless tyres airtight and fix punctures on the road quickly. The Silca Ultimate is a high-quality tubeless sealant that makes it very easy to make your tyres tubeless in one go.
This Silca Ultimate Sealant consists of recycled carbon fibres that provide the structure to seal larger holes up to 7.5mm, without compromising tyre life and handling. For mountain bike tyres, we recommend 60-90ml of sealant per tyre and road bike tyres around 30ml per tyre.
• Seals holes of 7.5 mm for up to 6 months.
• Must be poured into the tyre during installation.
• Not compatible with injectors (it seals holes larger than
a syringe).
• Use Replenisher every 90-120 days.
• 6, 9 and 12 mm recycled carbon fibres are evenly dispersed by a foaming latex to create ultra-strong seals.
• CO2 can be used to install tyres, but should be removed as soon as possible and replaced with air to preserve sealant life.
• Made in the US.
Visa mer
Visa mindre
This Silca Ultimate Sealant consists of recycled carbon fibres that provide the structure to seal larger holes up to 7.5mm, without compromising tyre life and handling. For mountain bike tyres, we recommend 60-90ml of sealant per tyre and road bike tyres around 30ml per tyre.
Tekniker
• Effective down to 10F/ -12C.• Seals holes of 7.5 mm for up to 6 months.
• Must be poured into the tyre during installation.
• Not compatible with injectors (it seals holes larger than
a syringe).
• Use Replenisher every 90-120 days.
• 6, 9 and 12 mm recycled carbon fibres are evenly dispersed by a foaming latex to create ultra-strong seals.
• CO2 can be used to install tyres, but should be removed as soon as possible and replaced with air to preserve sealant life.
• Made in the US.
Läs mer på vår blogg
Gör dina MTB-hjul slanglösa
Läs merOfta köpta tillsammans
Ofta köpta tillsammans
Rekommenderad av produktspecialisten
Rekommenderad av produktspecialisten
Relaterade produkter
Relaterade produkter
|
|
|
|
|
| Silca Ultimate Tubeless Sealant | Schwalbe Doc Blue | Muc-Off Tubeless Sealant | Continental Revo Sealant | |
| 0 recensioner | 191 recensioner | 34 recensioner | 49 recensioner | |
| Biologiskt nedbrytbar | Nej | Nej | Ja | Nej |
| Storlek | 236 ml / 473 ml / 946 ml | 60 ml / 200 ml / 500 ml | 140 ml / 1000 ml | 60 ml / 240 ml / 1000 ml |
| Från 354 | Från 97 | Från 171 | Från 79 | |
| Denna produkt | Visa produkt | Visa produkt | Visa produkt |
Silca Ultimate Tubeless Sealant
Beskrivning
The Silca Ultimate Tubeless Sealant is a latex to get your tubeless tyres airtight and fix punctures on the road quickly. The Silca Ultimate is a high-quality tubeless sealant that makes it very easy to make your tyres tubeless in one go.This Silca Ultimate Sealant consists of recycled carbon fibres that provide the structure to seal larger holes up to 7.5mm, without compromising tyre life and handling. For mountain bike tyres, we recommend 60-90ml of sealant per tyre and road bike tyres around 30ml per tyre.
Tekniker
• Effective down to 10F/ -12C.• Seals holes of 7.5 mm for up to 6 months.
• Must be poured into the tyre during installation.
• Not compatible with injectors (it seals holes larger than
a syringe).
• Use Replenisher every 90-120 days.
• 6, 9 and 12 mm recycled carbon fibres are evenly dispersed by a foaming latex to create ultra-strong seals.
• CO2 can be used to install tyres, but should be removed as soon as possible and replaced with air to preserve sealant life.
• Made in the US.
Läs mer på vår blogg
