Rek. pris 397
340
57 rabatt
Finns i lager
(Bara 8)
- Leverans inom 3-5 arbetsdagar
- Fri frakt vid 699 kr
- Trustpilot omdöme 4.7/5
- Enkel returnering
Ställ en fråga om denna produkt
Maila kundserviceSpecifikation
Specifikation
Märke
|
Campagnolo |
10-delad | |
Mekanisk | |
Fäste
|
Braze-on |
Vikt
|
98 gram |
Färg
|
Svart |
Typ
|
Dubbel/ Kompakt |
Beskrivning
Beskrivning
Campagnolo Veloce 10 Speed, framväxel för tvådelade vevpartier.
• Kapacitet: 16T
• Största möjliga drev: 55T
• Minsta möjliga drev: 34T
• Vikt: från 98 gram
Before starting to (dis)assemble, shift the front derailleur to the smallest blade. That way the tension on the gear cable is smaller, making it easier to release the derailleur.
Disconnect the gear cable
Use an Allen wrench to disconnect the shift cable from the derailleur. An Allen key can be found here.
Disassemble the bike chain
Before you can remove the derailleur, you must remove the chain. You will need a chain breaker or missing link pliers for this. The chain breaker can be found here and the missing link pliers can be found here.
Position the front derailleur
When installing, make sure to leave a gap of about 2 mm between the outer edge of the derailleur and the largest chainring.
Adjust your derailleur
It is important to properly adjust the derailleur after mounting. This is a meticulous job, which you can read all about here.
It is good to lubricate the pivot points and the cable with some oil from time to time. This keeps the front derailleur shifting smoothly. Good oils that you can use not only for this, but also for lubricating the rest of the drivetrain, can be found here.
Visa mer
Visa mindre
Tekniker
• Antifriktionsinsättning• Kapacitet: 16T
• Största möjliga drev: 55T
• Minsta möjliga drev: 34T
• Vikt: från 98 gram
Leverans innehåller:
Reduce the tension on the gear cableBefore starting to (dis)assemble, shift the front derailleur to the smallest blade. That way the tension on the gear cable is smaller, making it easier to release the derailleur.
Disconnect the gear cable
Use an Allen wrench to disconnect the shift cable from the derailleur. An Allen key can be found here.
Disassemble the bike chain
Before you can remove the derailleur, you must remove the chain. You will need a chain breaker or missing link pliers for this. The chain breaker can be found here and the missing link pliers can be found here.
Position the front derailleur
When installing, make sure to leave a gap of about 2 mm between the outer edge of the derailleur and the largest chainring.
Adjust your derailleur
It is important to properly adjust the derailleur after mounting. This is a meticulous job, which you can read all about here.
Montering
Grease the pivot points for proper operationIt is good to lubricate the pivot points and the cable with some oil from time to time. This keeps the front derailleur shifting smoothly. Good oils that you can use not only for this, but also for lubricating the rest of the drivetrain, can be found here.
Läs mer på vår blogg
Justera växeln - Få din cykel att växla smidigt igen [How-to]
Läs merRecensioner
Recensioner
5 / 5
En fungerande framväxel.
- Werner 23 november 2022
Efter montering och justering gör den sitt jobb alldeles utmärkt.
För- & Nackdelar
Bra alternativ
Gör verkligen vad den ska
Synd att den högre prisklassen inte är tillgänglig.
Automatiskt översatt
5 / 5
Mycket nöjd
- Philip 21 oktober 2021
Oslagbart pris och snabb service.
För- & Nackdelar
Snabb leverans
Valuta för pengarna
Automatiskt översatt