Vejl. udsalgspris 254
218
36 rabat
På lager
(Kun 1)
- Levering 2-3 arbejdsdage
- Gratis levering med Track & Trace over 399 kr
- Trustpilot bedømmelse 4.7/5
- Nem returnering
Stil et spørgsmål om dette produkt
E-mail vores kundeserviceSpecifikationer
Specifikationer
Mærke
|
Campagnolo |
10-speed | |
Mekanisk | |
Montering
|
Svejsning |
Vægt
|
98 gram |
Farve
|
Sort |
Type
|
Dobbelt / Kompakt |
Beskrivelse
Beskrivelse
Campagnolo Veloce 10-speed front derailleur for double and compact cranksets.
• Capacity: 16T
• Largest sprocket possible: 55T
• Smallest sprocket possible: 34T
• Weight: from 98 grams
Before starting to (dis)assemble, shift the front derailleur to the smallest blade. That way the tension on the gear cable is smaller, making it easier to release the derailleur.
Disconnect the gear cable
Use an Allen wrench to disconnect the shift cable from the derailleur. An Allen key can be found here.
Disassemble the bike chain
Before you can remove the derailleur, you must remove the chain. You will need a chain breaker or missing link pliers for this. The chain breaker can be found here and the missing link pliers can be found here.
Position the front derailleur
When installing, make sure to leave a gap of about 2 mm between the outer edge of the derailleur and the largest chainring.
Adjust your derailleur
It is important to properly adjust the derailleur after mounting. This is a meticulous job, which you can read all about here.
It is good to lubricate the pivot points and the cable with some oil from time to time. This keeps the front derailleur shifting smoothly. Good oils that you can use not only for this, but also for lubricating the rest of the drivetrain, can be found here.
Vis mere
Vis mindre
Teknologier
• Anti frictions insert• Capacity: 16T
• Largest sprocket possible: 55T
• Smallest sprocket possible: 34T
• Weight: from 98 grams
Produktet indeholder
Reduce the tension on the gear cableBefore starting to (dis)assemble, shift the front derailleur to the smallest blade. That way the tension on the gear cable is smaller, making it easier to release the derailleur.
Disconnect the gear cable
Use an Allen wrench to disconnect the shift cable from the derailleur. An Allen key can be found here.
Disassemble the bike chain
Before you can remove the derailleur, you must remove the chain. You will need a chain breaker or missing link pliers for this. The chain breaker can be found here and the missing link pliers can be found here.
Position the front derailleur
When installing, make sure to leave a gap of about 2 mm between the outer edge of the derailleur and the largest chainring.
Adjust your derailleur
It is important to properly adjust the derailleur after mounting. This is a meticulous job, which you can read all about here.
Montering
Grease the pivot points for proper operationIt is good to lubricate the pivot points and the cable with some oil from time to time. This keeps the front derailleur shifting smoothly. Good oils that you can use not only for this, but also for lubricating the rest of the drivetrain, can be found here.
Anmeldelser
Anmeldelser
5 / 5
En fungerende forskifter.
- Werner 23 november 2022
Efter montering og justering gør den sit arbejde fint.
Fordele og ulemper
Godt alternativ
Gør bestemt, hvad den skal
Ærgerligt, at den højere ende ikke er tilgængelig.
Automatisk oversat
5 / 5
Meget tilfreds
- Philip 21 oktober 2021
Uovertruffen pris og hurtig service.
Fordele og ulemper
Hurtig levering
Værdi for pengene
Automatisk oversat
4 / 5
Kram til prisen
- Peter 12 juni 2017
Købte denne som ekstra, da det efterhånden er svært at skaffe 10 speed dele. Sammenlignet med min Super Record forskifter er der nærmest kun vægt og finish til forskel. Derfor meget gunstig pris
Fordele og ulemper
Fungerer lige så godt som de dyre modeller
Robust
Vægt