SRAM Force 22 11-speed Bagskifter

Den nye Sram Force 22 bagskifter har alle teknologier ombord der sikrer, at denne bagskifter er den hurtigste og mest lydløse. Exact Actuation teknologien sikrer nøje, effektiv gearskiftning over hele kassetten. Tænderne på pulleyhjulene er blevet redesignet, hvilket resulterer i, at kæden løber glattere og mere støjsvag som aldrig før. Med alle disse nye teknologier er vægten dog stadig lavt og langt under 200 gram.

Teknologier

• Exact Actuation giver hurtige, nøje gearskiftning
• Kompatibel med Sram Red/force 22 skiftere
• Størst mulige tandhjul: 28T
• Støjsvag med optimerede AeroGlide, keramiske lejer
• Ny type fjedersætskrue
• Ny kædebur for nøje chain management
• Vægt: kort arm 166 gram (vejet af Mantel Bikeparts)

Montering

Loosening and tightening the gear cable
You can find the 5mm Allen key that you need for adjusting the limit screws here.

Removing the chain
Before you can install the new derailleur, you'll need to remove your chain. You can read about how to do that in this blog. You'll need a chain breaker, which you can find here. Some multi-tools contain a chain breaker. Make sure that you select a chain breaker for the right speed chain though - the size of the pins is different according to the speed of the chain.

Always use assembly grease
If you're fitting a new derailleur, you should definitely apply assembly grease on the screw thread of the derailleur pad. You can find our selection of assembly greases here.

Fitting jockey wheels
To fit jockey wheels you need a 2,5mm or 3mm Allen key. Find a handy Allen key set here.

Tips til brug

Skew derailleur hanger?
A problem that crops up often is a skew derailleur hanger. It can happen if the derailleur knocked into something, for example in the case of a fall on the bike. Luckily it can be fixed! You can read more here.

Clean the jockey wheels well too!
Just like the chain, the jockey wheels on a derailleur get super dirty. As a result the shifting is not as good and it does the lifespan of your derailleur no good. For that reason, it's a good idea to clean the jockey wheels at the same time when you clean and lube your chain. Do this by running a cloth along the jockey wheel while gently turning the chain. Of course it gets to a point where the jockey wheels are worn out. In this blog post you can find out more about when jockey wheels should be replaced and what you'll need.