DT Swiss Achternaaf 350
DT Swiss Achternaaf 350
Vejl. udsalgspris 1 851
1 717
- Levering 2-3 arbejdsdage
- Gratis levering med Track & Trace
- Trustpilot bedømmelse 4.7/5
- Nem returnering
Stil et spørgsmål om dette produkt
Fordele og ulemper
Fordele og ulemper
- Trusted ratchet system with 36-tooth ratchet.
- High-quality industrial bearings and good sealing for high durability.
- The hub can be taken apart without tools for easy maintenance.
- A quick engagement of 10 degrees ensures that power is transmitted efficiently.
- The DT Swiss 350 hub is heavier than the 240 and 180 variants.
Specifikationer
Specifikationer
| Mærke | DT Swiss | |
| Type eger | J-bend | |
| Bremsetype | Skivebremse - centerlock | |
| Navtype | Bagnav | |
| Antal eger | 28 Eger | |
| Friløbsnav indbygningsbredde | 148 x 12 mm aksel (Boost) | |
| Midten til Flange | Bagnav 36/ 23.2 mm |
The DT Swiss 350 hub is reliable and durable. It is sealed well and can withstand anything a mountain bike has to endure thanks to the steel industrial bearings. The hub uses the trusted DT Swiss ratchet system with a 36-tooth ratchet. This means you have two toothed rings rotating over each other until power is applied; then the power is efficiently transferred across the entire ring via the 36 teeth, resulting in high stiffness.
DT Swiss hubs are known for their simple maintenance. The end caps and freehub can be removed from the wheel without tools, allowing you to clean the interior and ratchet, which extends product life and ensures the freehub runs smoothly again. The 350 hub is available in Shimano MicroSpline and SRAM XD, with Boost spacing.
DT Swiss hubs are known for their simple maintenance. The end caps and freehub can be removed from the wheel without tools, allowing you to clean the interior and ratchet, which extends product life and ensures the freehub runs smoothly again. The 350 hub is available in Shimano MicroSpline and SRAM XD, with Boost spacing.