Nederland
België
Deutschland
Finland
Ireland
Luxembourg
Portugal
Poland
Österreich
France
España
Italia
Sverige
Danmark
Wheels Manufacturing Inc. PF30a Cannondale DUB
Wheels Manufacturing Inc. PF30a Cannondale DUB
Dette produkt er udgået og kommer ikke tilbage på lager.
- Trustpilot bedømmelse 4.6/5
- Nem returnering
Stil et spørgsmål om dette produkt
Specifikationer
Specifikationer
| Mærke | Wheels Manufacturing Inc. | |
| Egnet til | Race / MTB | |
| Kranksæt pasform | SRAM Dub (29mm) | |
| Bredde på krankboks | 73 mm Asymmetrisk (Cannondale) | |
| Diameter på krankboks | 46 mm | |
| Ydre diameter krankbokse | 48,5 mm/16-notch | |
| Gevind | Nej | |
| Velegnet til cykelmærker | Cannondale fra 2016 | |
| Velegnet til cykeltype | Racercykel/ gravelbike / cykelcross |
This Wheels Manufacturing Inc. PF30a Cannondale DUB Bottom Bracket is a durable and high quality bottom bracket for your Cannondale bike. This bottom bracket can be installed by simply turning both halves into each other. Because of this, you don't need a press in order to install this bottom bracket.
Dependent bottom bracket that lasts
This Wheels Manufacturing Inc. PF30a Cannondale DUB Bottom Bracket is made from aluminium where most other bottom brackets are made from plastic. This makes this Wheels Manufacturing Inc. PF30a extra strong and durable.
Smooth and self-changeable bearings.
This Wheels Manufacturing Inc. PF30a Cannondale DUB Bottom Bracket uses Enduro ABEC-3 bearings. These bearings are well sealed and even get an extra sealing ring from Wheels Manufacturing!
These bearings run smoothly and have excellent durability. And should the bearings ever do wear out, you can replace them yourself.
Dependent bottom bracket that lasts
This Wheels Manufacturing Inc. PF30a Cannondale DUB Bottom Bracket is made from aluminium where most other bottom brackets are made from plastic. This makes this Wheels Manufacturing Inc. PF30a extra strong and durable.
Smooth and self-changeable bearings.
This Wheels Manufacturing Inc. PF30a Cannondale DUB Bottom Bracket uses Enduro ABEC-3 bearings. These bearings are well sealed and even get an extra sealing ring from Wheels Manufacturing!
These bearings run smoothly and have excellent durability. And should the bearings ever do wear out, you can replace them yourself.
Relaterede produkter
Relaterede produkter
|
|
|
|
|
| Wheels Manufacturing Inc. PF30a Cannondale DUB | SRAM Dub PF30a | SRAM Dub PF30 | SRAM DUB PressFit 30 MTB Wide | |
| Egnet til | Race / MTB | Race / MTB | Race / MTB | MTB |
| Kranksæt pasform | SRAM Dub (29mm) | SRAM Dub (29mm) | SRAM Dub (29mm) | SRAM Dub (29mm) |
| Bredde på krankboks | 73 mm Asymmetrisk (Cannondale) | 73 mm Asymmetrisk (Cannondale) / 83 mm Asymmetrisk (Cannondale) | 68 mm / 73 mm | 83 mm |
| Diameter på krankboks | 46 mm | 46 mm | 46 mm | 46 mm |
| Ydre diameter krankbokse | 48,5 mm/16-notch | |||
| Gevind | Nej | Nej | Nej | Nej |
| 1 014 | 312 | 281 | 390 | |
| Dette produkt | Se produkt | Se produkt | Se produkt |
Alle specifikationer
General
Mærke
Wheels Manufacturing Inc.
Egnet til
Race / MTB
Kranksæt pasform
SRAM Dub (29mm)
Bredde på krankboks
73 mm Asymmetrisk (Cannondale)
Diameter på krankboks
46 mm
Ydre diameter krankbokse
48,5 mm/16-notch
Gevind
Nej
Stellets materiale
Carbon
Kompatibilitet
Velegnet til cykelmærker
Cannondale fra 2016
Velegnet til cykeltype
Racercykel/ gravelbike / cykelcross