Eje de Pedalier Wheels Manufacturing Inc. PF30a Cannondale DUB
Eje de Pedalier Wheels Manufacturing Inc. PF30a Cannondale DUB
PVPR 179,99
129,99
50,00 de descuento
En Stock
(aún 1)
- Entrega entre 2-4 días laborables
- Entrega gratis
- Valoración de Trustpilot 4.7/5
- Devoluciones fáciles
Haz una pregunta sobre este producto.
Envía un correo al servicio al clientePros y Contras
Pros y Contras
- This bottom bracket is easy to install by screwing two sides together.
- This bottom bracket is made of aluminium, which makes it extra durable.
- This bottom bracket has smooth-running Enduro bearings that last a long time.
- Eventually you can replace the bearings yourself.
- This bottom bracket is heavier than a plastic bottom bracket.
Especificaciones
Especificaciones
Marca
|
Wheels Manufacturing Inc. |
Adecuado para
|
De carretera / MTB |
SRAM Dub (29mm) | |
Anchura de eje del pedalier
|
73 mm Asimétrico (Cannondale) |
Diámetro eje del pedalier
|
46 mm |
Diámetro exterior rodamientos del eje de pedalier
|
48,5 mm/16-notch |
Rosca
|
No |
Cannondale desde 2016 | |
Apto para el tipo de bicicleta
|
Bici de Carretera / Grava |
Descripción
Descripción
This Wheels Manufacturing Inc. PF30a Cannondale DUB Bottom Bracket is a durable and high quality bottom bracket for your Cannondale bike. This bottom bracket can be installed by simply turning both halves into each other. Because of this, you don't need a press in order to install this bottom bracket.
Dependent bottom bracket that lasts
This Wheels Manufacturing Inc. PF30a Cannondale DUB Bottom Bracket is made from aluminium where most other bottom brackets are made from plastic. This makes this Wheels Manufacturing Inc. PF30a extra strong and durable.
Smooth and self-changeable bearings.
This Wheels Manufacturing Inc. PF30a Cannondale DUB Bottom Bracket uses Enduro ABEC-3 bearings. These bearings are well sealed and even get an extra sealing ring from Wheels Manufacturing!
These bearings run smoothly and have excellent durability. And should the bearings ever do wear out, you can replace them yourself.
Mostrar más
Mostrar menos
Dependent bottom bracket that lasts
This Wheels Manufacturing Inc. PF30a Cannondale DUB Bottom Bracket is made from aluminium where most other bottom brackets are made from plastic. This makes this Wheels Manufacturing Inc. PF30a extra strong and durable.
Smooth and self-changeable bearings.
This Wheels Manufacturing Inc. PF30a Cannondale DUB Bottom Bracket uses Enduro ABEC-3 bearings. These bearings are well sealed and even get an extra sealing ring from Wheels Manufacturing!
These bearings run smoothly and have excellent durability. And should the bearings ever do wear out, you can replace them yourself.
Recomendado por el especialista de producto
Recomendado por el especialista de producto
Productos relacionados
Productos relacionados
Wheels Manufacturing Inc. PF30a Cannondale DUB | SRAM Dub PF30a | SRAM Dub PF30 | |
0 opiniones | 0 opiniones | 0 opiniones | |
Adecuado para | De carretera / MTB | De carretera / MTB | De carretera / MTB |
Ajuste del eje del pedalier | SRAM Dub (29mm) | SRAM Dub (29mm) | SRAM Dub (29mm) |
Anchura de eje del pedalier | 73 mm Asimétrico (Cannondale) | 73 mm Asimétrico (Cannondale) / 83 mm Asimétrico (Cannondale) | 68 mm / 73 mm |
Diámetro eje del pedalier | 46 mm | 46 mm | 46 mm |
Diámetro exterior rodamientos del eje de pedalier | 48,5 mm/16-notch | ||
Rosca | No | No | No |
129,99 | 39,95 | 35,95 | |
Producto actual | Ver producto | Ver producto |
Todas las especificaciones
General
Marca
Wheels Manufacturing Inc.
Adecuado para
De carretera / MTB
Anchura de eje del pedalier
73 mm Asimétrico (Cannondale)
Diámetro eje del pedalier
46 mm
Diámetro exterior rodamientos del eje de pedalier
48,5 mm/16-notch
Rosca
No
Material del cuadro
Carbono