Rotor Press Fit 4124
Rotor Press Fit 4124
269
241
28 rabat
- Trustpilot bedømmelse 9.6 ude af 71.846 Anmeldelser
Har du et spørgsmål?
Kontakt
kundeservice
Specifikationer
Specifikationer
| Mærke | Rotor |
|---|---|
| Egnet til | MTB / Race |
| Bredde på krankboks | 86,5 mm / 89,5 mm / 92 mm |
| Diameter på krankboks | 41 mm |
| Type af aksel | 24 mm (Shimano Hollowtech II) |
| Farve | Sort |
Beskrivelse
Beskrivelse
This Rotor Press Fit 4124 bottom bracket is suitable for cranks with a 24mm axle, and frames with a 41mm diameter bottom bracket.
Press Fit bearings are protected in nylon bearing cups, which are pressed into the frame.
The bearings are particularly well sealed to increase the lifespan significantly.
Quality Enduro silicone seals provide an extremely smooth movement with unparalleled protection against dust, water and mud.
• Weight: 61 grams
• Colour: black
• For all ROTOR and Shimano 24 mm cranks
Vis mere
Vis mindre
Press Fit bearings are protected in nylon bearing cups, which are pressed into the frame.
The bearings are particularly well sealed to increase the lifespan significantly.
Quality Enduro silicone seals provide an extremely smooth movement with unparalleled protection against dust, water and mud.
Teknologier
• Material: steel bearing balls• Weight: 61 grams
• Colour: black
• For all ROTOR and Shimano 24 mm cranks
Anmeldelse
Anmeldelse
1 / 10
Af te raden
- Kenny 24 november 2016
Bij het plaatsen van mijn cranck door het bb kwam de plastieken ring er altijd weer mee uit. Door hem er nadien proberen in te duwen kraakte het harde plastieken ringen en was het stuk. Goedkoop is dus niet goede koop :-(
Anbefalet af produktspecialisten
Anbefalet af produktspecialisten
Relaterede produkter
Relaterede produkter
|
|
|
|
|
| Rotor Press Fit 4124 | Shimano Ultegra BB72 | SRAM Dub Pressfit 92 MTB | Shimano Dura Ace BB92 | |
| 1 Anmeldelse | 18 Anmeldelser | 18 Anmeldelser | 35 Anmeldelser | |
| Egnet til | MTB / Race | Race | MTB | Race |
| Bredde på krankboks | 86,5 mm / 89,5 mm / 92 mm | 86,5 mm | 89,5 mm / 92 mm | 86,5 mm |
| Diameter på krankboks | 41 mm | 41 mm | 41 mm | 41 mm |
| Type af aksel | 24 mm (Shimano Hollowtech II) | 24 mm (Shimano Hollowtech II) | SRAM Dub | 24 mm (Shimano Hollowtech II) |
| Farve | Sort | Sort | Sort | Sort |
| 241 | 272 | 311 | 288 | |
| Dette produkt | Se produkt | Se produkt | Se produkt |
Rotor Press Fit 4124
Specifikationer
| Mærke | Rotor |
|---|---|
|
Egnet til
|
MTB / Race |
|
Bredde på krankboks
|
86,5 mm / 89,5 mm / 92 mm |
|
Diameter på krankboks
|
41 mm |
| 24 mm (Shimano Hollowtech II) | |
|
Farve
|
Sort |
Rotor Press Fit 4124
Beskrivelse
This Rotor Press Fit 4124 bottom bracket is suitable for cranks with a 24mm axle, and frames with a 41mm diameter bottom bracket.Press Fit bearings are protected in nylon bearing cups, which are pressed into the frame.
The bearings are particularly well sealed to increase the lifespan significantly.
Quality Enduro silicone seals provide an extremely smooth movement with unparalleled protection against dust, water and mud.
Teknologier
• Material: steel bearing balls• Weight: 61 grams
• Colour: black
• For all ROTOR and Shimano 24 mm cranks