Shimano Tiagra 4700 10 speed Bakväxel

Beskrivning

Shimano Tiagra 4700 10-delad säkerställer att du kan växla exakt, smidigt och tyst på kassetten. Bakväxeln växlar även bra under tryck, tack vare 2 Teflon belagda gångjärn och ‘’Wide Link’’ designen.

Tekniker

I kombination med ett dubbelt / kompakt vevparti:
• Skillnaden mellan den minsta och största kransen får inte överstiga 16 kuggar
• Total kapacitet: 39 kuggar
• Största kransen : 28-34 kuggar
• Minsta kransen : 11-12 kuggar

I kombination med ett trippelt vevparti:
• Skillnaden mellan den minsta och största kransen får inte överstiga 20 kuggar
• Total kapacitet: 41 kuggar
• Största kransen : 25-32 kuggar
• Minsta kransen: 11-12 kuggar

• 2 Teflon belagda gångjärn
• "Wide Link" design för högre styvhet
• Vikt: +/- 275 gram

Montering

Tightening and loosening the gear cable
To loosen and tighten the bolt that attaches the gear cable to the derailleur, you will need a 5 mm Allen key. These can be found here.

Disassembling the chain
Before you can remove the derailleur, you must remove the chain. How to do this you can read here. For this you need a chain rivet tool, which you can find here. Make sure you get the right brand and number of speed.

Use assembly paste to mount
When you mount your new rear derailleur, you should put some assembly paste on the threads of the derailleur pad. You can buy this from here.

Mounting derailleur pulleys
To fit derailleur pulleys you need a 2.5 mm or 3 mm Allen key. A handy Allen key can be found here.

Användningstips

A crooked derailleur hanger?
A common problem is a warped derailleur hanger. This can be caused by the derailleur coming into contact with something hard, for example during a fall. Fortunately, this can be repaired! Find out more here.

Make sure you clean your derailleur pulleys too!
Like the chain, derailleur pulleys get very dirty. This makes for a less enjoyable ride and doesn't help with the durability of your drivetrain. Therefore, when cleaning the chain and / or oiling the chain, it is advisable to also clean the derailleur pulleys. Do this by gently turning the chain while you run a cloth along the derailleur wheel. However, at some point the derailleur wheels will be worn out. Visit our blog to find out when to replace your derailleur pulleys and which ones you need.

Läs mer på vår blogg