Vision Team 35 Comp SL Road Bike Wheels

The Vision Team 35 Comp SL wheels are very justified as an upgrade for your bike. The wheelset is equipped with a number of technologies from the more expensive Vision Metron series, but at a much more affordable price point. The Team 35 Comp SL is made with aero spokes, an asymmetrical spoke pattern, and sealed industrial bearings. The CNC milled rims with a height of 35 mm offer you a slight aerodynamic increase. The anodised black brake track looks great on any road bike.

To be used with Shimano and/or Sram 9/10/11 speed groupsets.

• Vision Team 35 Comp SL wheelset
• 9/10-speed spacer
• Vision quick release skewers
• Vision Rim tape

When ordering with tyres
• Vision Team 35 Comp SL wheelset
• 9/10-speed spacer
• Vision quick release skewers
• Vision rim tape
• 2x Vittoria Rubino Pro G2 tyres 25 mm
• 2x Schwalbe SV15 Inner tubes

• Cassette remover Shimano or Campagnolo
• (Optionally a torque wrench)

Installing a cassette on a wheel is easy if you have the right tools. If you purchase a cassette remover with a Shimano fit, you will be able to mount either a Shimano or Sram cassette on your rear wheel. Please note! For a Campagnolo cassette you need the Campagnolo tool. If you have a Shimano 9/10-speed cassette, first slide the spacer over the body. Then you place the cassette on the body. This can only be done in one way because of the fit of the body. Finally you turn the washer straight on by hand and tighten it with the cassette tool. Cassettes aren’t easily overtightened, but if you want you can use a torque wrench for this.

• Pay attention to the direction of travel when mounting your tyres
• For Shimano 9/10-speed, do not forget to mount the spacer first before installing the cassette
• Make sure the rim tape is stuck well in the rim