Nederland
België
Deutschland
United Kingdom
Finland
Ireland
Luxembourg
Portugal
Poland
Österreich
France
España
Italia
Sverige
Danmark
Vision Trimax 25 KB Cykelhjul Racer
Vision Trimax 25 KB Cykelhjul Racer
Outlet
![Vision Trimax 25 KB Cykelhjul Racer]( "Vision Trimax 25 KB Cykelhjul Racer")
![Vision Trimax 25 KB Cykelhjul Racer]( "Vision Trimax 25 KB Cykelhjul Racer")
![Vision Trimax 25 KB Cykelhjul Racer]( "Vision Trimax 25 KB Cykelhjul Racer")
![Vision Trimax 25 KB Cykelhjul Racer]( "Vision Trimax 25 KB Cykelhjul Racer")
![Vision Trimax 25 KB Cykelhjul Racer]( "Vision Trimax 25 KB Cykelhjul Racer")
![Vision Trimax 25 KB Cykelhjul Racer]( "Vision Trimax 25 KB Cykelhjul Racer")
![Vision Trimax 25 KB Cykelhjul Racer]( "Vision Trimax 25 KB Cykelhjul Racer")
![Vision Trimax 25 KB Cykelhjul Racer]( "Vision Trimax 25 KB Cykelhjul Racer")
1/10
Dette produkt er udgået og kommer ikke tilbage på lager.
- Trustpilot bedømmelse 4.7/5
- Nem returnering
Stil et spørgsmål om dette produkt
E-mail vores kundeserviceBeskrivelse
Beskrivelse
The Vision Trimax 25 KB road bike wheels are very light at only 1420 grams. This is partly due to the milled rims that save a lot of weight. The low weight increases the wheels' ability to accelerate after a turn. And it goes without saying the climbing and descending with this wheelset is a joy. Suddenly need to brake? The P.E.O. braking surface increases stopping power in dry as well as wet conditions, compared to a default aluminium braking surface. It's for good reason that Vision describes the wheelset as 'workhorse for all around use'.
The Vision Trimax 25 KB is tubeless ready, which means it's possible to mount tubeless tyres. The biggest upside of riding tubeless? The liquid latex in your tyre will seal small punctures, eliminating the need to replace your inner tube when you're on the way. Especially tyres starting at 25mm work great with the modern 17mm wide rim. This allows you to cycle with a lower tyre pressure for more comfort and traction.
The Trimax 25 KB wheels are built with aero spokes, which are attached in the rim with ABS spoke nipples. The spoke tension will remain optimal for longer compared to regular spoke nipples. With the Vision Trimax 25 KB you'll have a light and comfortable workhorse wheelset at your disposal.
• Vision QR-93 quick release skewers
• Vision rim tape
• (possibly a torque wrench)
Installing a cassette on a wheel is easy if you have the right tools. If you purchase a cassette remover with a Shimano fit, you will be able to mount either a Shimano or Sram cassette on your rear wheel. Please note! For a Campagnolo cassette you need the Campagnolo tool. If you have a Shimano 9/10-speed cassette, first slide the spacer over the body. Then you place the cassette on the body. This can only be done in one way because of the fit of the body. Finally you turn the washer straight on by hand and tighten it with the cassette tool. Cassettes aren’t easily overtightened, but if you want you can use a torque wrench for this.
• For Shimano 9/10-speed, do not forget to mount the spacer first before installing the cassette.
• Make sure the rim tape is stuck well in the rim.
Vis mere
Vis mindre
The Vision Trimax 25 KB is tubeless ready, which means it's possible to mount tubeless tyres. The biggest upside of riding tubeless? The liquid latex in your tyre will seal small punctures, eliminating the need to replace your inner tube when you're on the way. Especially tyres starting at 25mm work great with the modern 17mm wide rim. This allows you to cycle with a lower tyre pressure for more comfort and traction.
The Trimax 25 KB wheels are built with aero spokes, which are attached in the rim with ABS spoke nipples. The spoke tension will remain optimal for longer compared to regular spoke nipples. With the Vision Trimax 25 KB you'll have a light and comfortable workhorse wheelset at your disposal.
Kompatibilitet
• To be used with Shimano and/or Sram 9/10/11 speed groupsets.Produktet indeholder
• Vision Trimax 25 KB• Vision QR-93 quick release skewers
• Vision rim tape
Montering
• Cassette remover Shimano or Campagnolo• (possibly a torque wrench)
Installing a cassette on a wheel is easy if you have the right tools. If you purchase a cassette remover with a Shimano fit, you will be able to mount either a Shimano or Sram cassette on your rear wheel. Please note! For a Campagnolo cassette you need the Campagnolo tool. If you have a Shimano 9/10-speed cassette, first slide the spacer over the body. Then you place the cassette on the body. This can only be done in one way because of the fit of the body. Finally you turn the washer straight on by hand and tighten it with the cassette tool. Cassettes aren’t easily overtightened, but if you want you can use a torque wrench for this.
Tips til brug
• Pay attention to the direction of travel when mounting your tyres.• For Shimano 9/10-speed, do not forget to mount the spacer first before installing the cassette.
• Make sure the rim tape is stuck well in the rim.
Anmeldelser
Anmeldelser
5 / 5
Meget gode hjul
- Walter 9 marts 2021
Du accelererer øjeblikkeligt med disse hjul.
Fordele og ulemper
De kører næsten af sig selv
God pris
Lys
Navet kan vise bremsemærker
Automatisk oversat
4 / 5
De første fornemmelser er meget gode
- Michel 7 oktober 2020
Kun 2 ture med disse hjul, lidt over 200 km. Meget lette og responsive, jeg føler, at jeg har skiftet cykel. Tilfreds med mit køb. Det vil vise sig på lang sigt...
Automatisk oversat
Relaterede produkter
Relaterede produkter
|
|
|
|
|
| Vision Trimax 25 KB | DT Swiss PR 1400 DICUT 32 OXiC | Campagnolo Zonda | Campagnolo Calima | |
| 2 Anmeldelser | 4 Anmeldelser | 158 Anmeldelser | 49 Anmeldelser | |
| Egenskaber hjul | Lette klatrehjul | Lette klatrehjul | Lette klatrehjul | Udskiftningshjul |
| Type kassette-body | SRAM Race 10/11-speed / Shimano Race HG 9-12-speed | SRAM Race 10/11-speed / Shimano Race HG 9-12-speed / SRAM XDR 12-speed | SRAM Race 10/11-speed / Shimano Race HG 9-12-speed / Campagnolo 9-12-speed | SRAM Race 10/11-speed / Shimano Race HG 9-12-speed / Campagnolo 9-12-speed |
| Dækbredde anbefalet af Mantel | til 25 mm | 25 til 28 mm | til 25 mm | til 25 mm |
| Nødvendig ventillængde | > 39 mm | > 47 mm | > 39 mm | > 30 mm |
| Vægt (vejet af Mantel) | 1459 gram | 1595 gram | 1883 gram | |
| Type bremse | Fælgbremse | Fælgbremse | Fælgbremse | Fælgbremse |
| 4 664 | Fra 2 955 | 3 111 | 1 474 | |
| Dette produkt | Se produkt | Se produkt | Se produkt |
Alle specifikationer
General
Komponenter
Dimensioner
Inkluderet
Bremseklodser inkluderet
Nej
Quick release medfølger
Ja
Hjultaske medfølger
Nej
Vision Trimax 25 KB Cykelhjul Racer
Alle specifikationer
Mærke
Vision
General
Komponenter
Dimensioner
Inkluderet
Bremseklodser inkluderet
Nej
Quick release medfølger
Ja
Hjultaske medfølger
Nej
Vision Trimax 25 KB Cykelhjul Racer
Beskrivelse
The Vision Trimax 25 KB road bike wheels are very light at only 1420 grams. This is partly due to the milled rims that save a lot of weight. The low weight increases the wheels' ability to accelerate after a turn. And it goes without saying the climbing and descending with this wheelset is a joy. Suddenly need to brake? The P.E.O. braking surface increases stopping power in dry as well as wet conditions, compared to a default aluminium braking surface. It's for good reason that Vision describes the wheelset as 'workhorse for all around use'.The Vision Trimax 25 KB is tubeless ready, which means it's possible to mount tubeless tyres. The biggest upside of riding tubeless? The liquid latex in your tyre will seal small punctures, eliminating the need to replace your inner tube when you're on the way. Especially tyres starting at 25mm work great with the modern 17mm wide rim. This allows you to cycle with a lower tyre pressure for more comfort and traction.
The Trimax 25 KB wheels are built with aero spokes, which are attached in the rim with ABS spoke nipples. The spoke tension will remain optimal for longer compared to regular spoke nipples. With the Vision Trimax 25 KB you'll have a light and comfortable workhorse wheelset at your disposal.
Kompatibilitet
• To be used with Shimano and/or Sram 9/10/11 speed groupsets.Produktet indeholder
• Vision Trimax 25 KB• Vision QR-93 quick release skewers
• Vision rim tape
Montering
• Cassette remover Shimano or Campagnolo• (possibly a torque wrench)
Installing a cassette on a wheel is easy if you have the right tools. If you purchase a cassette remover with a Shimano fit, you will be able to mount either a Shimano or Sram cassette on your rear wheel. Please note! For a Campagnolo cassette you need the Campagnolo tool. If you have a Shimano 9/10-speed cassette, first slide the spacer over the body. Then you place the cassette on the body. This can only be done in one way because of the fit of the body. Finally you turn the washer straight on by hand and tighten it with the cassette tool. Cassettes aren’t easily overtightened, but if you want you can use a torque wrench for this.
Tips til brug
• Pay attention to the direction of travel when mounting your tyres.• For Shimano 9/10-speed, do not forget to mount the spacer first before installing the cassette.
• Make sure the rim tape is stuck well in the rim.