Nederland
België
Deutschland
United Kingdom
Finland
Ireland
Luxembourg
Portugal
Poland
Österreich
France
España
Italia
Sverige
Danmark
Fulcrum Racing 6 Cykelhjul Racer
Fulcrum Racing 6 Cykelhjul Racer
1/7
Dette produkt er udgået og kommer ikke tilbage på lager.
- Trustpilot bedømmelse 4.7/5
- Nem returnering
Stil et spørgsmål om dette produkt
E-mail vores kundeserviceBeskrivelse
Beskrivelse
Fulcrum Racing 6 C17 wheels were already available in disc brake form, but now there’s a rim brake version. Quality-wise it’s somewhere between the Racing 7 and Racing 5. Thanks to the high flange in the rear wheel, it reacts immediately to acceleration after a turn or when sprinting. The use of straight pull spokes greatly decreases the likelihood of spokes breaking. This is why the Fulcrum Racing 6 C17 make a reliable wheel set to cycle kilometers on end.
• 9/10-speed spacer
• Rim tape
• Quick-release Skewers (front and rear)
• (possibly a torque wrench)
Installing a cassette on a wheel is easy if you have the right tools. If you purchase a cassette remover with a Shimano fit, you will be able to mount either a Shimano or Sram cassette on your rear wheel. Please note! For a Campagnolo cassette you need the Campagnolo tool. If you have a Shimano 9/10-speed cassette, first slide the spacer over the body. Then you place the cassette on the body. This can only be done in one way because of the fit of the body. Finally you turn the washer straight on by hand and tighten it with the cassette tool. Cassettes aren’t easily overtightened, but if you want you can use a torque wrench for this.
• For Shimano 9/10-speed, do not forget to mount the spacer first before installing the cassette
• Make sure the rim tape is stuck well in the rim
• On both the front and rear wheel, there is a small adjustment screw on the left-hand side to adjust the side play
Vis mere
Vis mindre
Kompatibilitet
• To be used with Shimano and/or SRAM 9/10/11 speed groupsets.Produktet indeholder
• Fulcrum Racing 6 wheels• 9/10-speed spacer
• Rim tape
• Quick-release Skewers (front and rear)
Montering
• Cassette remover Shimano or Campagnolo• (possibly a torque wrench)
Installing a cassette on a wheel is easy if you have the right tools. If you purchase a cassette remover with a Shimano fit, you will be able to mount either a Shimano or Sram cassette on your rear wheel. Please note! For a Campagnolo cassette you need the Campagnolo tool. If you have a Shimano 9/10-speed cassette, first slide the spacer over the body. Then you place the cassette on the body. This can only be done in one way because of the fit of the body. Finally you turn the washer straight on by hand and tighten it with the cassette tool. Cassettes aren’t easily overtightened, but if you want you can use a torque wrench for this.
Tips til brug
• Pay attention to the direction of travel when mounting your tyres• For Shimano 9/10-speed, do not forget to mount the spacer first before installing the cassette
• Make sure the rim tape is stuck well in the rim
• On both the front and rear wheel, there is a small adjustment screw on the left-hand side to adjust the side play
Anmeldelser
Anmeldelser
5 / 5
OK
- Yve 2 februar 2022
Mine tidligere hjul var af typen Racing 7 og 11 år gamle. De var ikke rigtig pæne og lige længere. Derfor blev de udskiftet. Jeg har kun cyklet 55 km med det nye sæt. Så jeg kan ikke sige så meget om det. Fælgen er pæn og lige. Det ser godt ud. Jeg er vant til 23 mm dæk. Disse hjul kræver minimum 25 mm dæk. På grund af det lidt lavere dæktryk føles turen meget mere behagelig (blødere). Mens jeg kørte, hørte jeg ikke nogen raslen fra kroppen i neutral.
Fordele og ulemper
Accelererer godt
Ingen raslende krop
Ser pæn ud
Kommer måske med tiden :-)
Automatisk oversat
5 / 5
godt tilfreds
- Cees 25 marts 2021
Jeg har allerede kørt 600 km med den igen
Fordele og ulemper
afsendt hurtigt
ser godt ud
Tykt overtilfreds
Automatisk oversat
5 / 5
Meget godt hjul til pengene
- Helmut 17 august 2020
Automatisk oversat
5 / 5
Good value for money
- Rasmus Birch 19 maj 2020
The wheels are great and they came absolutely true. They are running very smooth and I'm very happy with them.
Fordele og ulemper
Nice looking
Quit freehub
Smooth
5
Yve, 2 februar 2022
OK
Mine tidligere hjul var af typen Racing 7 og 11 år gamle. De var ikke rigtig pæne og lige længere. Derfor blev de udskiftet. Jeg har kun cyklet 55 km med det nye sæt. Så jeg kan ikke sige så meget om det. Fælgen er pæn og lige. Det ser godt ud. Jeg er vant til 23 mm dæk. Disse hjul kræver minimum 25 mm dæk. På grund af det lidt lavere dæktryk føles turen meget mere behagelig (blødere). Mens jeg kørte, hørte jeg ikke nogen raslen fra kroppen i neutral.
-
Accelererer godt
-
Ingen raslende krop
-
Ser pæn ud
-
Kommer måske med tiden :-)
Automatisk oversat
Relaterede produkter
Relaterede produkter
|
|
|
|
|
| Fulcrum Racing 6 | Shimano WH-RS100 | Shimano 105 WH-RS300 | Campagnolo Calima | |
| 9 Anmeldelser | 78 Anmeldelser | 24 Anmeldelser | 49 Anmeldelser | |
| Egenskaber hjul | Udskiftningshjul | Udskiftningshjul | Udskiftningshjul | Udskiftningshjul |
| Type kassette-body | SRAM Race 10/11-speed / Shimano Race HG 9-12-speed / Campagnolo 9-12-speed | SRAM Race 10/11-speed / Shimano Race HG 9-12-speed | SRAM Race 10/11-speed / Shimano Race HG 9-12-speed | SRAM Race 10/11-speed / Shimano Race HG 9-12-speed / Campagnolo 9-12-speed |
| Dækbredde anbefalet af Mantel | til 25 mm | til 25 mm | til 25 mm | til 25 mm |
| Nødvendig ventillængde | > 40 mm / > 43 mm | > 39 mm | > 39 mm | > 30 mm |
| Vægt (vejet af Mantel) | 1789 gram | 1808 gram | 1883 gram | 1883 gram |
| Type bremse | Fælgbremse | Fælgbremse | Fælgbremse | Fælgbremse |
| Fra 1 703 | Fra 545 | Fra 740 | 1 474 | |
| Dette produkt | Se produkt | Se produkt | Se produkt |
Alle specifikationer
General
Komponenter
Dimensioner
Inkluderet
Quick release medfølger
Ja
Fulcrum Racing 6 Cykelhjul Racer
Alle specifikationer
Mærke
Fulcrum
General
Komponenter
Dimensioner
Inkluderet
Quick release medfølger
Ja
Fulcrum Racing 6 Cykelhjul Racer
Beskrivelse
Fulcrum Racing 6 C17 wheels were already available in disc brake form, but now there’s a rim brake version. Quality-wise it’s somewhere between the Racing 7 and Racing 5. Thanks to the high flange in the rear wheel, it reacts immediately to acceleration after a turn or when sprinting. The use of straight pull spokes greatly decreases the likelihood of spokes breaking. This is why the Fulcrum Racing 6 C17 make a reliable wheel set to cycle kilometers on end.Kompatibilitet
• To be used with Shimano and/or SRAM 9/10/11 speed groupsets.Produktet indeholder
• Fulcrum Racing 6 wheels• 9/10-speed spacer
• Rim tape
• Quick-release Skewers (front and rear)
Montering
• Cassette remover Shimano or Campagnolo• (possibly a torque wrench)
Installing a cassette on a wheel is easy if you have the right tools. If you purchase a cassette remover with a Shimano fit, you will be able to mount either a Shimano or Sram cassette on your rear wheel. Please note! For a Campagnolo cassette you need the Campagnolo tool. If you have a Shimano 9/10-speed cassette, first slide the spacer over the body. Then you place the cassette on the body. This can only be done in one way because of the fit of the body. Finally you turn the washer straight on by hand and tighten it with the cassette tool. Cassettes aren’t easily overtightened, but if you want you can use a torque wrench for this.
Tips til brug
• Pay attention to the direction of travel when mounting your tyres• For Shimano 9/10-speed, do not forget to mount the spacer first before installing the cassette
• Make sure the rim tape is stuck well in the rim
• On both the front and rear wheel, there is a small adjustment screw on the left-hand side to adjust the side play