SRAM GX 11-speed Bakväxel
SRAM GX 11-speed Bakväxel
Denna produkt är utsåld och kommer inte tillbaka på lager.
- Trustpilot omdöme 4.7/5
- Enkel returnering
Ställ en fråga om denna produkt
Maila kundserviceBeskrivning
Beskrivning
SRAM GX 11s bakväxelförare innehar många teknologier som även finns utrustade på Srams absoluta topprodukter. GX bakväxelföraren är något tyngre men är till ett bättre pris. Växelföraren är flr ett 2 x 11-delad kassett från 10 upp till 42 kuggar. Detta ger dig det största spannet med en växlingsgrupp. Ingen klättring är för brant och du kommer inte förlora maxfart när du när du ger full gas.
Teknologier:
Cage Lock ™:
Med Cage Lock är det lättare att installera din kedja och montera/ avmontera ditt hjul. Detta är gjort genom att pusha hållarenframåt och fäste den med en knapp.
Roller Bearing Clutch ™:
Denna teknik ser till att din drift är maximalt stabiliserad, även genom kuperad terräng. Med denna teknik är oönskade rörelser från din växelförare och kedja eliminerade, utan att behöva kompromissa växelprecisionen.
X-Actuation ™:
Specialdesignad för SRAM 1X, X-Actuation ser till att växlingen behålls skarp och konsistent över hela kassetten från den 10e till den 42a kuggen.
• Material: aluminum (hållare)
• Kullager: försegalde patronkullager
To loosen and tighten the bolt that attaches the gear cable to the derailleur, you will need a 5 mm Allen key. These can be found here.
Disassembling the chain
Before you can remove the derailleur, you must remove the chain. How to do this you can read here. For this you need a chain rivet tool, which you can find here. Make sure you get the right brand and number of speed.
Use assembly paste to mount
When you mount your new rear derailleur, you should put some assembly paste on the threads of the derailleur pad. You can buy this from here.
Mounting derailleur pulleys
To fit derailleur pulleys you need a 2.5 mm or 3 mm Allen key. A handy Allen key can be found here.
A common problem is a warped derailleur hanger. This can be caused by the derailleur coming into contact with something hard, for example during a fall. Fortunately, this can be repaired! Find out more here.
Make sure you clean your derailleur pulleys too!
Like the chain, derailleur pulleys get very dirty. This makes for a less enjoyable ride and doesn't help with the durability of your drivetrain. Therefore, when cleaning the chain and / or oiling the chain, it is advisable to also clean the derailleur pulleys. Do this by gently turning the chain while you run a cloth along the derailleur wheel. However, at some point the derailleur wheels will be worn out. Visit our blog to find out when to replace your derailleur pulleys and which ones you need.
Visa mer
Visa mindre
Teknologier:
Cage Lock ™:
Med Cage Lock är det lättare att installera din kedja och montera/ avmontera ditt hjul. Detta är gjort genom att pusha hållarenframåt och fäste den med en knapp.
Roller Bearing Clutch ™:
Denna teknik ser till att din drift är maximalt stabiliserad, även genom kuperad terräng. Med denna teknik är oönskade rörelser från din växelförare och kedja eliminerade, utan att behöva kompromissa växelprecisionen.
X-Actuation ™:
Specialdesignad för SRAM 1X, X-Actuation ser till att växlingen behålls skarp och konsistent över hela kassetten från den 10e till den 42a kuggen.
Tekniker
• Vikt: 289 gram• Material: aluminum (hållare)
• Kullager: försegalde patronkullager
Montering
Tightening and loosening the gear cableTo loosen and tighten the bolt that attaches the gear cable to the derailleur, you will need a 5 mm Allen key. These can be found here.
Disassembling the chain
Before you can remove the derailleur, you must remove the chain. How to do this you can read here. For this you need a chain rivet tool, which you can find here. Make sure you get the right brand and number of speed.
Use assembly paste to mount
When you mount your new rear derailleur, you should put some assembly paste on the threads of the derailleur pad. You can buy this from here.
Mounting derailleur pulleys
To fit derailleur pulleys you need a 2.5 mm or 3 mm Allen key. A handy Allen key can be found here.
Användningstips
A crooked derailleur hanger?A common problem is a warped derailleur hanger. This can be caused by the derailleur coming into contact with something hard, for example during a fall. Fortunately, this can be repaired! Find out more here.
Make sure you clean your derailleur pulleys too!
Like the chain, derailleur pulleys get very dirty. This makes for a less enjoyable ride and doesn't help with the durability of your drivetrain. Therefore, when cleaning the chain and / or oiling the chain, it is advisable to also clean the derailleur pulleys. Do this by gently turning the chain while you run a cloth along the derailleur wheel. However, at some point the derailleur wheels will be worn out. Visit our blog to find out when to replace your derailleur pulleys and which ones you need.
Relaterade produkter
Relaterade produkter
SRAM GX 11-speed | Shimano XT M8000 Shadow Plus 11-speed | Shimano XTR M9000 Shadow Plus 11-speed | |
0 recensioner | 67 recensioner | 6 recensioner | |
Antal växlar | 11-delad | 11-delad | 11-delad |
Sätt att byta växel | Mekanisk | Mekanisk | Mekanisk |
Växelarmslängd | Medium växelarm / Lång växelarm | Medium växelarm / Lång växelarm / RD-M8000-GS | Kort växelarm / Lång växelarm |
Maxkapacitet | 32K | 39K / 47K | 37K / 45K |
Vikt | 261 gram | 262 gram | 226 gram |
Största kassettkrans | 42T | 40T / 42T / 46T | |
Från 946 | Från 850 | Från 2 661 | |
Denna produkt | Visa produkt | Visa produkt |